From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from out1-smtp.messagingengine.com ([66.111.4.25]:49701 "EHLO out1-smtp.messagingengine.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1761012AbdEWRua (ORCPT ); Tue, 23 May 2017 13:50:30 -0400 Subject: FAILED: patch "[PATCH] thermal: mt8173: minor mtk_thermal.c cleanups" failed to apply to 4.9-stable tree To: dawei.chien@mediatek.com, edubezval@gmail.com, matthias.bgg@gmail.com Cc: From: Date: Tue, 23 May 2017 19:50:20 +0200 Message-ID: <1495561820177181@kroah.com> MIME-Version: 1.0 Content-Type: text/plain; charset=ANSI_X3.4-1968 Content-Transfer-Encoding: 8bit Sender: stable-owner@vger.kernel.org List-ID: The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to . thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >>From 05d7839aa290901429d8edcd8f7974c9df2bcaa5 Mon Sep 17 00:00:00 2001 From: Dawei Chien Date: Tue, 21 Feb 2017 20:26:52 +0800 Subject: [PATCH] thermal: mt8173: minor mtk_thermal.c cleanups If thermal bank with 4 sensors, thermal driver should read TEMP_MSR3. However, currently thermal driver would not read TEMP_MSR3 since mt8173 thermal driver only use 3 sensors on each thermal bank at the same time, so this patch would not effect temperature. Only if mt mt8173 thermal driver use 4 sensors on any thermal bank, would read third sensor two times, and lose fourth sensor of vale. cc: stable@vger.kernel.org Fixes: b7cf0053738c ("thermal: Add Mediatek thermal driver for mt2701.") Reviewed-by: Matthias Brugger Signed-off-by: Dawei Chien Signed-off-by: Eduardo Valentin diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c index 1aff7fde54b1..7737f14846f9 100644 --- a/drivers/thermal/mtk_thermal.c +++ b/drivers/thermal/mtk_thermal.c @@ -191,7 +191,7 @@ static const int mt8173_bank_data[MT8173_NUM_ZONES][3] = { }; static const int mt8173_msr[MT8173_NUM_SENSORS_PER_ZONE] = { - TEMP_MSR0, TEMP_MSR1, TEMP_MSR2, TEMP_MSR2 + TEMP_MSR0, TEMP_MSR1, TEMP_MSR2, TEMP_MSR3 }; static const int mt8173_adcpnp[MT8173_NUM_SENSORS_PER_ZONE] = {