From: <gregkh@linuxfoundation.org>
To: rafael.j.wysocki@intel.com, alexander.levin@verizon.com,
gregkh@linuxfoundation.org, sedat.dilek@gmail.com
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "PM / runtime: Avoid false-positive warnings from might_sleep_if()" has been added to the 4.4-stable tree
Date: Thu, 15 Jun 2017 11:42:05 +0200 [thread overview]
Message-ID: <149751972514176@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
PM / runtime: Avoid false-positive warnings from might_sleep_if()
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
pm-runtime-avoid-false-positive-warnings-from-might_sleep_if.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From foo@baz Thu Jun 15 11:39:37 CEST 2017
From: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Date: Tue, 23 May 2017 21:53:54 -0400
Subject: PM / runtime: Avoid false-positive warnings from might_sleep_if()
From: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
[ Upstream commit a9306a63631493afc75893a4ac405d4e1cbae6aa ]
The might_sleep_if() assertions in __pm_runtime_idle(),
__pm_runtime_suspend() and __pm_runtime_resume() may generate
false-positive warnings in some situations. For example, that
happens if a nested pm_runtime_get_sync()/pm_runtime_put() pair
is executed with disabled interrupts within an outer
pm_runtime_get_sync()/pm_runtime_put() section for the same device.
[Generally, pm_runtime_get_sync() may sleep, so it should not be
called with disabled interrupts, but in this particular case the
previous pm_runtime_get_sync() guarantees that the device will not
be suspended, so the inner pm_runtime_get_sync() will return
immediately after incrementing the device's usage counter.]
That started to happen in the i915 driver in 4.10-rc, leading to
the following splat:
BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:1032
in_atomic(): 1, irqs_disabled(): 0, pid: 1500, name: Xorg
1 lock held by Xorg/1500:
#0: (&dev->struct_mutex){+.+.+.}, at:
[<ffffffffa0680c13>] i915_mutex_lock_interruptible+0x43/0x140 [i915]
CPU: 0 PID: 1500 Comm: Xorg Not tainted
Call Trace:
dump_stack+0x85/0xc2
___might_sleep+0x196/0x260
__might_sleep+0x53/0xb0
__pm_runtime_resume+0x7a/0x90
intel_runtime_pm_get+0x25/0x90 [i915]
aliasing_gtt_bind_vma+0xaa/0xf0 [i915]
i915_vma_bind+0xaf/0x1e0 [i915]
i915_gem_execbuffer_relocate_entry+0x513/0x6f0 [i915]
i915_gem_execbuffer_relocate_vma.isra.34+0x188/0x250 [i915]
? trace_hardirqs_on+0xd/0x10
? i915_gem_execbuffer_reserve_vma.isra.31+0x152/0x1f0 [i915]
? i915_gem_execbuffer_reserve.isra.32+0x372/0x3a0 [i915]
i915_gem_do_execbuffer.isra.38+0xa70/0x1a40 [i915]
? __might_fault+0x4e/0xb0
i915_gem_execbuffer2+0xc5/0x260 [i915]
? __might_fault+0x4e/0xb0
drm_ioctl+0x206/0x450 [drm]
? i915_gem_execbuffer+0x340/0x340 [i915]
? __fget+0x5/0x200
do_vfs_ioctl+0x91/0x6f0
? __fget+0x111/0x200
? __fget+0x5/0x200
SyS_ioctl+0x79/0x90
entry_SYSCALL_64_fastpath+0x23/0xc6
even though the code triggering it is correct.
Unfortunately, the might_sleep_if() assertions in question are
too coarse-grained to cover such cases correctly, so make them
a bit less sensitive in order to avoid the false-positives.
Reported-and-tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/base/power/runtime.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
--- a/drivers/base/power/runtime.c
+++ b/drivers/base/power/runtime.c
@@ -889,13 +889,13 @@ int __pm_runtime_idle(struct device *dev
unsigned long flags;
int retval;
- might_sleep_if(!(rpmflags & RPM_ASYNC) && !dev->power.irq_safe);
-
if (rpmflags & RPM_GET_PUT) {
if (!atomic_dec_and_test(&dev->power.usage_count))
return 0;
}
+ might_sleep_if(!(rpmflags & RPM_ASYNC) && !dev->power.irq_safe);
+
spin_lock_irqsave(&dev->power.lock, flags);
retval = rpm_idle(dev, rpmflags);
spin_unlock_irqrestore(&dev->power.lock, flags);
@@ -921,13 +921,13 @@ int __pm_runtime_suspend(struct device *
unsigned long flags;
int retval;
- might_sleep_if(!(rpmflags & RPM_ASYNC) && !dev->power.irq_safe);
-
if (rpmflags & RPM_GET_PUT) {
if (!atomic_dec_and_test(&dev->power.usage_count))
return 0;
}
+ might_sleep_if(!(rpmflags & RPM_ASYNC) && !dev->power.irq_safe);
+
spin_lock_irqsave(&dev->power.lock, flags);
retval = rpm_suspend(dev, rpmflags);
spin_unlock_irqrestore(&dev->power.lock, flags);
@@ -952,7 +952,8 @@ int __pm_runtime_resume(struct device *d
unsigned long flags;
int retval;
- might_sleep_if(!(rpmflags & RPM_ASYNC) && !dev->power.irq_safe);
+ might_sleep_if(!(rpmflags & RPM_ASYNC) && !dev->power.irq_safe &&
+ dev->power.runtime_status != RPM_ACTIVE);
if (rpmflags & RPM_GET_PUT)
atomic_inc(&dev->power.usage_count);
Patches currently in stable-queue which might be from rafael.j.wysocki@intel.com are
queue-4.4/pm-runtime-avoid-false-positive-warnings-from-might_sleep_if.patch
reply other threads:[~2017-06-15 9:42 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=149751972514176@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=alexander.levin@verizon.com \
--cc=rafael.j.wysocki@intel.com \
--cc=sedat.dilek@gmail.com \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox