Patch "usb: dwc2: gadget: Fix GUSBCFG.USBTRDTIM value" has been added to the 4.9-stable tree

Patch "usb: dwc2: gadget: Fix GUSBCFG.USBTRDTIM value" has been added to the 4.9-stable tree

[gregkh]

This is a note to let you know that I've just added the patch titled

    usb: dwc2: gadget: Fix GUSBCFG.USBTRDTIM value

to the 4.9-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     usb-dwc2-gadget-fix-gusbcfg.usbtrdtim-value.patch
and it can be found in the queue-4.9 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From foo@baz Mon Jul  3 13:37:32 CEST 2017
From: Amelie Delaunay <amelie.delaunay@st.com>
Date: Thu, 12 Jan 2017 16:09:44 +0100
Subject: usb: dwc2: gadget: Fix GUSBCFG.USBTRDTIM value

From: Amelie Delaunay <amelie.delaunay@st.com>


[ Upstream commit ca02954ada711b08e5b0d84590a631fd63ed39f9 ]

USBTrdTim must be programmed to 0x5 when phy has a UTMI+ 16-bit wide
interface or 0x9 when it has a 8-bit wide interface.
GUSBCFG reset value (Value After Reset: 0x1400) sets USBTrdTim to 0x5.
In case of 8-bit UTMI+, without clearing GUSBCFG.USBTRDTIM mask, USBTrdTim
results in 0xD (0x5 | 0x9).
That's why we need to clear GUSBCFG.USBTRDTIM mask before setting USBTrdTim
value, to ensure USBTrdTim is correctly set in case of 8-bit UTMI+.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc2/gadget.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -2532,7 +2532,7 @@ void dwc2_hsotg_core_init_disconnected(s
 	/* keep other bits untouched (so e.g. forced modes are not lost) */
 	usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
 	usbcfg &= ~(GUSBCFG_TOUTCAL_MASK | GUSBCFG_PHYIF16 | GUSBCFG_SRPCAP |
-		GUSBCFG_HNPCAP);
+		GUSBCFG_HNPCAP | GUSBCFG_USBTRDTIM_MASK);
 
 	/* set the PLL on, remove the HNP/SRP and set the PHY */
 	val = (hsotg->phyif == GUSBCFG_PHYIF8) ? 9 : 5;
@@ -3403,7 +3403,7 @@ static void dwc2_hsotg_init(struct dwc2_
 	/* keep other bits untouched (so e.g. forced modes are not lost) */
 	usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
 	usbcfg &= ~(GUSBCFG_TOUTCAL_MASK | GUSBCFG_PHYIF16 | GUSBCFG_SRPCAP |
-		GUSBCFG_HNPCAP);
+		GUSBCFG_HNPCAP | GUSBCFG_USBTRDTIM_MASK);
 
 	/* set the PLL on, remove the HNP/SRP and set the PHY */
 	trdtim = (hsotg->phyif == GUSBCFG_PHYIF8) ? 9 : 5;


Patches currently in stable-queue which might be from amelie.delaunay@st.com are

queue-4.9/usb-dwc2-gadget-fix-gusbcfg.usbtrdtim-value.patch