Patch "usb: dwc3: replace %p with %pK" has been added to the 3.18-stable tree

Patch "usb: dwc3: replace %p with %pK" has been added to the 3.18-stable tree

[gregkh]

This is a note to let you know that I've just added the patch titled

    usb: dwc3: replace %p with %pK

to the 3.18-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     usb-dwc3-replace-p-with-pk.patch
and it can be found in the queue-3.18 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From 04fb365c453e14ff9e8a28f1c46050d920a27a4a Mon Sep 17 00:00:00 2001
From: Felipe Balbi <felipe.balbi@linux.intel.com>
Date: Wed, 17 May 2017 15:57:45 +0300
Subject: usb: dwc3: replace %p with %pK

From: Felipe Balbi <felipe.balbi@linux.intel.com>

commit 04fb365c453e14ff9e8a28f1c46050d920a27a4a upstream.

%p will leak kernel pointers, so let's not expose the information on
dmesg and instead use %pK. %pK will only show the actual addresses if
explicitly enabled under /proc/sys/kernel/kptr_restrict.

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/dwc3/dwc3-st.c |    2 +-
 drivers/usb/dwc3/gadget.c  |    4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/usb/dwc3/dwc3-st.c
+++ b/drivers/usb/dwc3/dwc3-st.c
@@ -227,7 +227,7 @@ static int st_dwc3_probe(struct platform
 
 	dwc3_data->syscfg_reg_off = res->start;
 
-	dev_vdbg(&pdev->dev, "glue-logic addr 0x%p, syscfg-reg offset 0x%x\n",
+	dev_vdbg(&pdev->dev, "glue-logic addr 0x%pK, syscfg-reg offset 0x%x\n",
 		 dwc3_data->glue_base, dwc3_data->syscfg_reg_off);
 
 	dwc3_data->rstc_pwrdn = devm_reset_control_get(dev, "powerdown");
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1229,7 +1229,7 @@ static int dwc3_gadget_ep_dequeue(struct
 			dwc3_stop_active_transfer(dwc, dep->number, true);
 			goto out1;
 		}
-		dev_err(dwc->dev, "request %p was not queued to %s\n",
+		dev_err(dwc->dev, "request %pK was not queued to %s\n",
 				request, ep->name);
 		ret = -EINVAL;
 		goto out0;
@@ -1833,7 +1833,7 @@ static int __dwc3_cleanup_done_trbs(stru
 		 * would help. Lets hope that if this occurs, someone
 		 * fixes the root cause instead of looking away :)
 		 */
-		dev_err(dwc->dev, "%s's TRB (%p) still owned by HW\n",
+		dev_err(dwc->dev, "%s's TRB (%pK) still owned by HW\n",
 				dep->name, trb);
 
 	count = trb->size & DWC3_TRB_SIZE_MASK;


Patches currently in stable-queue which might be from felipe.balbi@linux.intel.com are

queue-3.18/usb-dwc3-replace-p-with-pk.patch