* Patch "PCI: rockchip: Use normal register bank for config accessors" has been added to the 4.12-stable tree
@ 2017-07-25 0:05 gregkh
0 siblings, 0 replies; only message in thread
From: gregkh @ 2017-07-25 0:05 UTC (permalink / raw)
To: shawn.lin, bhelgaas, briannorris, gregkh, jeffy.chen
Cc: stable, stable-commits
This is a note to let you know that I've just added the patch titled
PCI: rockchip: Use normal register bank for config accessors
to the 4.12-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
pci-rockchip-use-normal-register-bank-for-config-accessors.patch
and it can be found in the queue-4.12 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From dc8cca5ef25ac4cb0dfc37467521a759767ff361 Mon Sep 17 00:00:00 2001
From: Shawn Lin <shawn.lin@rock-chips.com>
Date: Mon, 3 Jul 2017 17:21:02 +0800
Subject: PCI: rockchip: Use normal register bank for config accessors
From: Shawn Lin <shawn.lin@rock-chips.com>
commit dc8cca5ef25ac4cb0dfc37467521a759767ff361 upstream.
Rockchip's RC has two banks of registers for the root port: a normal bank
that is strictly compatible with the PCIe spec, and a privileged bank that
can be used to change RO bits of root port registers.
When probing the RC driver, we use the privileged bank to do some basic
setup work as some RO bits are hw-inited to wrong value. But we didn't
change to the normal bank after probing the driver.
This leads to a serious problem when the PME code tries to clear the PME
status by writing PCI_EXP_RTSTA_PME to the register of PCI_EXP_RTSTA. Per
PCIe 3.0 spec, section 7.8.14, the PME status bit is RW1C. So the PME code
is doing the right thing to clear the PME status but we find the RC doesn't
clear it but actually setting it to one. So finally the system trap in
pcie_pme_work_fn() as PCI_EXP_RTSTA_PME is true now forever. This issue
can be reproduced by booting kernel with pci=nomsi.
Use the normal register bank for the PCI config accessors. The privileged
bank is used only internally by this driver.
Fixes: e77f847d ("PCI: rockchip: Add Rockchip PCIe controller support")
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jeffy Chen <jeffy.chen@rock-chips.com>
Cc: Brian Norris <briannorris@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/pci/host/pcie-rockchip.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
--- a/drivers/pci/host/pcie-rockchip.c
+++ b/drivers/pci/host/pcie-rockchip.c
@@ -139,6 +139,7 @@
PCIE_CORE_INT_CT | PCIE_CORE_INT_UTC | \
PCIE_CORE_INT_MMVC)
+#define PCIE_RC_CONFIG_NORMAL_BASE 0x800000
#define PCIE_RC_CONFIG_BASE 0xa00000
#define PCIE_RC_CONFIG_RID_CCR (PCIE_RC_CONFIG_BASE + 0x08)
#define PCIE_RC_CONFIG_SCC_SHIFT 16
@@ -295,7 +296,9 @@ static int rockchip_pcie_valid_device(st
static int rockchip_pcie_rd_own_conf(struct rockchip_pcie *rockchip,
int where, int size, u32 *val)
{
- void __iomem *addr = rockchip->apb_base + PCIE_RC_CONFIG_BASE + where;
+ void __iomem *addr;
+
+ addr = rockchip->apb_base + PCIE_RC_CONFIG_NORMAL_BASE + where;
if (!IS_ALIGNED((uintptr_t)addr, size)) {
*val = 0;
@@ -319,11 +322,13 @@ static int rockchip_pcie_wr_own_conf(str
int where, int size, u32 val)
{
u32 mask, tmp, offset;
+ void __iomem *addr;
offset = where & ~0x3;
+ addr = rockchip->apb_base + PCIE_RC_CONFIG_NORMAL_BASE + offset;
if (size == 4) {
- writel(val, rockchip->apb_base + PCIE_RC_CONFIG_BASE + offset);
+ writel(val, addr);
return PCIBIOS_SUCCESSFUL;
}
@@ -334,9 +339,9 @@ static int rockchip_pcie_wr_own_conf(str
* corrupt RW1C bits in adjacent registers. But the hardware
* doesn't support smaller writes.
*/
- tmp = readl(rockchip->apb_base + PCIE_RC_CONFIG_BASE + offset) & mask;
+ tmp = readl(addr) & mask;
tmp |= val << ((where & 0x3) * 8);
- writel(tmp, rockchip->apb_base + PCIE_RC_CONFIG_BASE + offset);
+ writel(tmp, addr);
return PCIBIOS_SUCCESSFUL;
}
Patches currently in stable-queue which might be from shawn.lin@rock-chips.com are
queue-4.12/pci-rockchip-use-normal-register-bank-for-config-accessors.patch
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2017-07-25 0:05 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-07-25 0:05 Patch "PCI: rockchip: Use normal register bank for config accessors" has been added to the 4.12-stable tree gregkh
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).