Patch "KVM: PPC: Book3S HV: Context-switch EBB registers properly" has been added to the 4.4-stable tree

Patch "KVM: PPC: Book3S HV: Context-switch EBB registers properly" has been added to the 4.4-stable tree

[gregkh]

This is a note to let you know that I've just added the patch titled

    KVM: PPC: Book3S HV: Context-switch EBB registers properly

to the 4.4-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     kvm-ppc-book3s-hv-context-switch-ebb-registers-properly.patch
and it can be found in the queue-4.4 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From ca8efa1df1d15a1795a2da57f9f6aada6ed6b946 Mon Sep 17 00:00:00 2001
From: Paul Mackerras <paulus@ozlabs.org>
Date: Tue, 6 Jun 2017 16:47:22 +1000
Subject: KVM: PPC: Book3S HV: Context-switch EBB registers properly

From: Paul Mackerras <paulus@ozlabs.org>

commit ca8efa1df1d15a1795a2da57f9f6aada6ed6b946 upstream.

This adds code to save the values of three SPRs (special-purpose
registers) used by userspace to control event-based branches (EBBs),
which are essentially interrupts that get delivered directly to
userspace.  These registers are loaded up with guest values when
entering the guest, and their values are saved when exiting the
guest, but we were not saving the host values and restoring them
before going back to userspace.

On POWER8 this would only affect userspace programs which explicitly
request the use of EBBs and also use the KVM_RUN ioctl, since the
only source of EBBs on POWER8 is the PMU, and there is an explicit
enable bit in the PMU registers (and those PMU registers do get
properly context-switched between host and guest).  On POWER9 there
is provision for externally-generated EBBs, and these are not subject
to the control in the PMU registers.

Since these registers only affect userspace, we can save them when
we first come in from userspace and restore them before returning to
userspace, rather than saving/restoring the host values on every
guest entry/exit.  Similarly, we don't need to worry about their
values on offline secondary threads since they execute in the context
of the idle task, which never executes in userspace.

Fixes: b005255e12a3 ("KVM: PPC: Book3S HV: Context-switch new POWER8 SPRs", 2014-01-08)
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kvm/book3s_hv.c |   16 ++++++++++++++++
 1 file changed, 16 insertions(+)

--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -2687,6 +2687,7 @@ static int kvmppc_vcpu_run_hv(struct kvm
 {
 	int r;
 	int srcu_idx;
+	unsigned long ebb_regs[3] = {};	/* shut up GCC */
 
 	if (!vcpu->arch.sane) {
 		run->exit_reason = KVM_EXIT_INTERNAL_ERROR;
@@ -2736,6 +2737,14 @@ static int kvmppc_vcpu_run_hv(struct kvm
 	flush_fp_to_thread(current);
 	flush_altivec_to_thread(current);
 	flush_vsx_to_thread(current);
+
+	/* Save userspace EBB register values */
+	if (cpu_has_feature(CPU_FTR_ARCH_207S)) {
+		ebb_regs[0] = mfspr(SPRN_EBBHR);
+		ebb_regs[1] = mfspr(SPRN_EBBRR);
+		ebb_regs[2] = mfspr(SPRN_BESCR);
+	}
+
 	vcpu->arch.wqp = &vcpu->arch.vcore->wq;
 	vcpu->arch.pgdir = current->mm->pgd;
 	vcpu->arch.state = KVMPPC_VCPU_BUSY_IN_HOST;
@@ -2757,6 +2766,13 @@ static int kvmppc_vcpu_run_hv(struct kvm
 		}
 	} while (is_kvmppc_resume_guest(r));
 
+	/* Restore userspace EBB register values */
+	if (cpu_has_feature(CPU_FTR_ARCH_207S)) {
+		mtspr(SPRN_EBBHR, ebb_regs[0]);
+		mtspr(SPRN_EBBRR, ebb_regs[1]);
+		mtspr(SPRN_BESCR, ebb_regs[2]);
+	}
+
  out:
 	vcpu->arch.state = KVMPPC_VCPU_NOTREADY;
 	atomic_dec(&vcpu->kvm->arch.vcpus_running);


Patches currently in stable-queue which might be from paulus@ozlabs.org are

queue-4.4/kvm-ppc-book3s-hv-context-switch-ebb-registers-properly.patch
queue-4.4/kvm-ppc-book3s-hv-restore-critical-sprs-to-host-values-on-guest-exit.patch