Patch "net/mlx5: Disable RoCE on the e-switch management port under switchdev mode" has been added to the 4.9-stable tree

Patch "net/mlx5: Disable RoCE on the e-switch management port under switchdev mode" has been added to the 4.9-stable tree

[gregkh]

This is a note to let you know that I've just added the patch titled

    net/mlx5: Disable RoCE on the e-switch management port under switchdev mode

to the 4.9-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     net-mlx5-disable-roce-on-the-e-switch-management-port-under-switchdev-mode.patch
and it can be found in the queue-4.9 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From foo@baz Fri Aug  4 13:32:40 PDT 2017
From: Or Gerlitz <ogerlitz@mellanox.com>
Date: Wed, 28 Dec 2016 14:58:31 +0200
Subject: net/mlx5: Disable RoCE on the e-switch management port under switchdev mode

From: Or Gerlitz <ogerlitz@mellanox.com>


[ Upstream commit 9da34cd34e85aacc55af8774b81b1f23e86014f9 ]

Under the switchdev/offloads mode, packets that don't match any
e-switch steering rule are sent towards the e-switch management
port. We use a NIC HW steering rule set per vport (uplink and VFs)
to make them be received into the host OS through the respective
vport representor netdevice.

Currnetly such missed RoCE packets will not get to this NIC steering
rule, and hence VF RoCE will not work over the slow path of the offloads
mode. This is b/c these packets will be matched by a steering rule added
by the firmware that serves RoCE traffic set on the PF NIC vport which
is also the e-switch management port under SRIOV.

Disabling RoCE on the e-switch management vport when we are in the offloads
mode, will signal to the firmware to remove their RoCE rule, and then the
missed RoCE packets will be matched by the representor NIC steering rule
as any other missed packets.

To achieve that, we disable RoCE on the PF vport. We do that by removing
(hot-unplugging) the IB device instance associated with the PF. This is
also required by our current model where the PF serves as the uplink
representor and hence only SW switching (TC, bridge, OVS) applications
and slow path vport mlx5e net-device should be running over that vport.

Fixes: c930a3ad7453 ('net/mlx5e: Add devlink based SRIOV mode changes')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c |   11 +++++++++++
 1 file changed, 11 insertions(+)

--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
@@ -672,6 +672,12 @@ int esw_offloads_init(struct mlx5_eswitc
 		if (err)
 			goto err_reps;
 	}
+
+	/* disable PF RoCE so missed packets don't go through RoCE steering */
+	mlx5_dev_list_lock();
+	mlx5_remove_dev_by_protocol(esw->dev, MLX5_INTERFACE_PROTOCOL_IB);
+	mlx5_dev_list_unlock();
+
 	return 0;
 
 err_reps:
@@ -695,6 +701,11 @@ static int esw_offloads_stop(struct mlx5
 {
 	int err, err1, num_vfs = esw->dev->priv.sriov.num_vfs;
 
+	/* enable back PF RoCE */
+	mlx5_dev_list_lock();
+	mlx5_add_dev_by_protocol(esw->dev, MLX5_INTERFACE_PROTOCOL_IB);
+	mlx5_dev_list_unlock();
+
 	mlx5_eswitch_disable_sriov(esw);
 	err = mlx5_eswitch_enable_sriov(esw, num_vfs, SRIOV_LEGACY);
 	if (err) {


Patches currently in stable-queue which might be from ogerlitz@mellanox.com are

queue-4.9/net-mlx5-disable-roce-on-the-e-switch-management-port-under-switchdev-mode.patch