From: <gregkh@linuxfoundation.org>
To: abailon@baylibre.com, b-liu@ti.com, gregkh@linuxfoundation.org,
nsekhar@ti.com
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "usb: musb: musb_cppi41: Configure the number of channels for DA8xx" has been added to the 4.13-stable tree
Date: Mon, 23 Oct 2017 14:56:43 +0200 [thread overview]
Message-ID: <15087634034733@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
usb: musb: musb_cppi41: Configure the number of channels for DA8xx
to the 4.13-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
usb-musb-musb_cppi41-configure-the-number-of-channels-for-da8xx.patch
and it can be found in the queue-4.13 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From 297d7fe9e439473800ab1f2f853b4b5f8c888500 Mon Sep 17 00:00:00 2001
From: Alexandre Bailon <abailon@baylibre.com>
Date: Mon, 9 Oct 2017 22:46:11 -0500
Subject: usb: musb: musb_cppi41: Configure the number of channels for DA8xx
From: Alexandre Bailon <abailon@baylibre.com>
commit 297d7fe9e439473800ab1f2f853b4b5f8c888500 upstream.
Currently, the number of channels is set to 15 but in the case of DA8xx,
the number of channels is 4.
Update the driver to configure the number of channels at runtime.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Tested-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/musb/musb_cppi41.c | 31 ++++++++++++++++++++++++++-----
1 file changed, 26 insertions(+), 5 deletions(-)
--- a/drivers/usb/musb/musb_cppi41.c
+++ b/drivers/usb/musb/musb_cppi41.c
@@ -30,10 +30,12 @@
#define DA8XX_USB_AUTOREQ 0x14
#define DA8XX_USB_TEARDOWN 0x1c
+#define DA8XX_DMA_NUM_CHANNELS 4
+
struct cppi41_dma_controller {
struct dma_controller controller;
- struct cppi41_dma_channel rx_channel[MUSB_DMA_NUM_CHANNELS];
- struct cppi41_dma_channel tx_channel[MUSB_DMA_NUM_CHANNELS];
+ struct cppi41_dma_channel *rx_channel;
+ struct cppi41_dma_channel *tx_channel;
struct hrtimer early_tx;
struct list_head early_tx_list;
u32 rx_mode;
@@ -45,6 +47,7 @@ struct cppi41_dma_controller {
void (*set_dma_mode)(struct cppi41_dma_channel *cppi41_channel,
unsigned int mode);
+ u8 num_channels;
};
static void save_rx_toggle(struct cppi41_dma_channel *cppi41_channel)
@@ -483,7 +486,7 @@ static struct dma_channel *cppi41_dma_ch
struct cppi41_dma_channel *cppi41_channel = NULL;
u8 ch_num = hw_ep->epnum - 1;
- if (ch_num >= MUSB_DMA_NUM_CHANNELS)
+ if (ch_num >= controller->num_channels)
return NULL;
if (is_tx)
@@ -643,7 +646,7 @@ static void cppi41_release_all_dma_chans
struct dma_chan *dc;
int i;
- for (i = 0; i < MUSB_DMA_NUM_CHANNELS; i++) {
+ for (i = 0; i < ctrl->num_channels; i++) {
dc = ctrl->tx_channel[i].dc;
if (dc)
dma_release_channel(dc);
@@ -695,7 +698,7 @@ static int cppi41_dma_controller_start(s
goto err;
ret = -EINVAL;
- if (port > MUSB_DMA_NUM_CHANNELS || !port)
+ if (port > controller->num_channels || !port)
goto err;
if (is_tx)
cppi41_channel = &controller->tx_channel[port - 1];
@@ -736,6 +739,8 @@ void cppi41_dma_controller_destroy(struc
hrtimer_cancel(&controller->early_tx);
cppi41_dma_controller_stop(controller);
+ kfree(controller->rx_channel);
+ kfree(controller->tx_channel);
kfree(controller);
}
EXPORT_SYMBOL_GPL(cppi41_dma_controller_destroy);
@@ -744,6 +749,7 @@ struct dma_controller *
cppi41_dma_controller_create(struct musb *musb, void __iomem *base)
{
struct cppi41_dma_controller *controller;
+ int channel_size;
int ret = 0;
if (!musb->controller->parent->of_node) {
@@ -770,18 +776,33 @@ cppi41_dma_controller_create(struct musb
controller->tdown_reg = DA8XX_USB_TEARDOWN;
controller->autoreq_reg = DA8XX_USB_AUTOREQ;
controller->set_dma_mode = da8xx_set_dma_mode;
+ controller->num_channels = DA8XX_DMA_NUM_CHANNELS;
} else {
controller->tdown_reg = USB_TDOWN;
controller->autoreq_reg = USB_CTRL_AUTOREQ;
controller->set_dma_mode = cppi41_set_dma_mode;
+ controller->num_channels = MUSB_DMA_NUM_CHANNELS;
}
+ channel_size = controller->num_channels *
+ sizeof(struct cppi41_dma_channel);
+ controller->rx_channel = kzalloc(channel_size, GFP_KERNEL);
+ if (!controller->rx_channel)
+ goto rx_channel_alloc_fail;
+ controller->tx_channel = kzalloc(channel_size, GFP_KERNEL);
+ if (!controller->tx_channel)
+ goto tx_channel_alloc_fail;
+
ret = cppi41_dma_controller_start(controller);
if (ret)
goto plat_get_fail;
return &controller->controller;
plat_get_fail:
+ kfree(controller->tx_channel);
+tx_channel_alloc_fail:
+ kfree(controller->rx_channel);
+rx_channel_alloc_fail:
kfree(controller);
kzalloc_fail:
if (ret == -EPROBE_DEFER)
Patches currently in stable-queue which might be from abailon@baylibre.com are
queue-4.13/usb-musb-musb_cppi41-configure-the-number-of-channels-for-da8xx.patch
queue-4.13/usb-musb-musb_cppi41-fix-the-address-of-teardown-and-autoreq-registers.patch
queue-4.13/usb-musb-musb_cppi41-fix-cppi41_set_dma_mode-for-da8xx.patch
reply other threads:[~2017-10-23 12:57 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=15087634034733@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=abailon@baylibre.com \
--cc=b-liu@ti.com \
--cc=nsekhar@ti.com \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).