Patch "s390/qeth: fix retrieval of vipa and proxy-arp addresses" has been added to the 4.9-stable tree

Patch "s390/qeth: fix retrieval of vipa and proxy-arp addresses" has been added to the 4.9-stable tree

[gregkh]

This is a note to let you know that I've just added the patch titled

    s390/qeth: fix retrieval of vipa and proxy-arp addresses

to the 4.9-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     s390-qeth-fix-retrieval-of-vipa-and-proxy-arp-addresses.patch
and it can be found in the queue-4.9 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From foo@baz Thu Nov  9 09:48:01 CET 2017
From: Ursula Braun <ubraun@linux.vnet.ibm.com>
Date: Thu, 12 Jan 2017 15:48:43 +0100
Subject: s390/qeth: fix retrieval of vipa and proxy-arp addresses

From: Ursula Braun <ubraun@linux.vnet.ibm.com>


[ Upstream commit e48b9eaaa29a0a7d5da2df136b07eefa0180d584 ]

qeth devices in layer3 mode need a separate handling of vipa and proxy-arp
addresses. vipa and proxy-arp addresses processed by qeth can be read from
userspace. Introduced with commit 5f78e29ceebf ("qeth: optimize IP handling
in rx_mode callback") the retrieval of vipa and proxy-arp addresses is
broken, if more than one vipa or proxy-arp address are set.

The qeth code used local variable "int i" for 2 different purposes. This
patch now spends 2 separate local variables of type "int".
While touching these functions hash_for_each_safe() is converted to
hash_for_each(), since there is no removal of hash entries.

Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Reviewed-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Reference-ID: RQM 3524
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/s390/net/qeth_l3_sys.c |   30 ++++++++++++++++--------------
 1 file changed, 16 insertions(+), 14 deletions(-)

--- a/drivers/s390/net/qeth_l3_sys.c
+++ b/drivers/s390/net/qeth_l3_sys.c
@@ -692,15 +692,15 @@ static ssize_t qeth_l3_dev_vipa_add_show
 			enum qeth_prot_versions proto)
 {
 	struct qeth_ipaddr *ipaddr;
-	struct hlist_node  *tmp;
 	char addr_str[40];
+	int str_len = 0;
 	int entry_len; /* length of 1 entry string, differs between v4 and v6 */
-	int i = 0;
+	int i;
 
 	entry_len = (proto == QETH_PROT_IPV4)? 12 : 40;
 	entry_len += 2; /* \n + terminator */
 	spin_lock_bh(&card->ip_lock);
-	hash_for_each_safe(card->ip_htable, i, tmp, ipaddr, hnode) {
+	hash_for_each(card->ip_htable, i, ipaddr, hnode) {
 		if (ipaddr->proto != proto)
 			continue;
 		if (ipaddr->type != QETH_IP_TYPE_VIPA)
@@ -708,16 +708,17 @@ static ssize_t qeth_l3_dev_vipa_add_show
 		/* String must not be longer than PAGE_SIZE. So we check if
 		 * string length gets near PAGE_SIZE. Then we can savely display
 		 * the next IPv6 address (worst case, compared to IPv4) */
-		if ((PAGE_SIZE - i) <= entry_len)
+		if ((PAGE_SIZE - str_len) <= entry_len)
 			break;
 		qeth_l3_ipaddr_to_string(proto, (const u8 *)&ipaddr->u,
 			addr_str);
-		i += snprintf(buf + i, PAGE_SIZE - i, "%s\n", addr_str);
+		str_len += snprintf(buf + str_len, PAGE_SIZE - str_len, "%s\n",
+				    addr_str);
 	}
 	spin_unlock_bh(&card->ip_lock);
-	i += snprintf(buf + i, PAGE_SIZE - i, "\n");
+	str_len += snprintf(buf + str_len, PAGE_SIZE - str_len, "\n");
 
-	return i;
+	return str_len;
 }
 
 static ssize_t qeth_l3_dev_vipa_add4_show(struct device *dev,
@@ -854,15 +855,15 @@ static ssize_t qeth_l3_dev_rxip_add_show
 		       enum qeth_prot_versions proto)
 {
 	struct qeth_ipaddr *ipaddr;
-	struct hlist_node *tmp;
 	char addr_str[40];
+	int str_len = 0;
 	int entry_len; /* length of 1 entry string, differs between v4 and v6 */
-	int i = 0;
+	int i;
 
 	entry_len = (proto == QETH_PROT_IPV4)? 12 : 40;
 	entry_len += 2; /* \n + terminator */
 	spin_lock_bh(&card->ip_lock);
-	hash_for_each_safe(card->ip_htable, i, tmp, ipaddr, hnode) {
+	hash_for_each(card->ip_htable, i, ipaddr, hnode) {
 		if (ipaddr->proto != proto)
 			continue;
 		if (ipaddr->type != QETH_IP_TYPE_RXIP)
@@ -870,16 +871,17 @@ static ssize_t qeth_l3_dev_rxip_add_show
 		/* String must not be longer than PAGE_SIZE. So we check if
 		 * string length gets near PAGE_SIZE. Then we can savely display
 		 * the next IPv6 address (worst case, compared to IPv4) */
-		if ((PAGE_SIZE - i) <= entry_len)
+		if ((PAGE_SIZE - str_len) <= entry_len)
 			break;
 		qeth_l3_ipaddr_to_string(proto, (const u8 *)&ipaddr->u,
 			addr_str);
-		i += snprintf(buf + i, PAGE_SIZE - i, "%s\n", addr_str);
+		str_len += snprintf(buf + str_len, PAGE_SIZE - str_len, "%s\n",
+				    addr_str);
 	}
 	spin_unlock_bh(&card->ip_lock);
-	i += snprintf(buf + i, PAGE_SIZE - i, "\n");
+	str_len += snprintf(buf + str_len, PAGE_SIZE - str_len, "\n");
 
-	return i;
+	return str_len;
 }
 
 static ssize_t qeth_l3_dev_rxip_add4_show(struct device *dev,


Patches currently in stable-queue which might be from ubraun@linux.vnet.ibm.com are

queue-4.9/s390-qeth-fix-retrieval-of-vipa-and-proxy-arp-addresses.patch
queue-4.9/s390-qeth-issue-startlan-as-first-ipa-command.patch