From: <gregkh@linuxfoundation.org>
To: amsfield22@gmail.com, alexander.levin@verizon.com,
gregkh@linuxfoundation.org, jic23@kernel.org
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "iio: trigger: free trigger resource correctly" has been added to the 4.4-stable tree
Date: Thu, 09 Nov 2017 18:24:27 +0100 [thread overview]
Message-ID: <15102482679919@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
iio: trigger: free trigger resource correctly
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
iio-trigger-free-trigger-resource-correctly.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From foo@baz Thu Nov 9 18:22:51 CET 2017
From: Alison Schofield <amsfield22@gmail.com>
Date: Thu, 19 Jan 2017 19:47:38 -0800
Subject: iio: trigger: free trigger resource correctly
From: Alison Schofield <amsfield22@gmail.com>
[ Upstream commit 10e840dfb0b7fc345082dd9e5fff3c1c02e7690e ]
These stand-alone trigger drivers were using iio_trigger_put()
where they should have been using iio_trigger_free(). The
iio_trigger_put() adds a module_put which is bad since they
never did a module_get.
In the sysfs driver, module_get/put's are used as triggers are
added & removed. This extra module_put() occurs on an error path
in the probe routine (probably rare).
In the bfin-timer & interrupt trigger drivers, the module resources
are not explicitly managed, so it's doing a put on something that
was never get'd. It occurs on the probe error path and on the
remove path (not so rare).
Tested with the sysfs trigger driver.
The bfin & interrupt drivers were build tested & inspected only.
Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/trigger/iio-trig-interrupt.c | 8 ++++----
drivers/iio/trigger/iio-trig-sysfs.c | 2 +-
drivers/staging/iio/trigger/iio-trig-bfin-timer.c | 4 ++--
3 files changed, 7 insertions(+), 7 deletions(-)
--- a/drivers/iio/trigger/iio-trig-interrupt.c
+++ b/drivers/iio/trigger/iio-trig-interrupt.c
@@ -58,7 +58,7 @@ static int iio_interrupt_trigger_probe(s
trig_info = kzalloc(sizeof(*trig_info), GFP_KERNEL);
if (!trig_info) {
ret = -ENOMEM;
- goto error_put_trigger;
+ goto error_free_trigger;
}
iio_trigger_set_drvdata(trig, trig_info);
trig_info->irq = irq;
@@ -83,8 +83,8 @@ error_release_irq:
free_irq(irq, trig);
error_free_trig_info:
kfree(trig_info);
-error_put_trigger:
- iio_trigger_put(trig);
+error_free_trigger:
+ iio_trigger_free(trig);
error_ret:
return ret;
}
@@ -99,7 +99,7 @@ static int iio_interrupt_trigger_remove(
iio_trigger_unregister(trig);
free_irq(trig_info->irq, trig);
kfree(trig_info);
- iio_trigger_put(trig);
+ iio_trigger_free(trig);
return 0;
}
--- a/drivers/iio/trigger/iio-trig-sysfs.c
+++ b/drivers/iio/trigger/iio-trig-sysfs.c
@@ -174,7 +174,7 @@ static int iio_sysfs_trigger_probe(int i
return 0;
out2:
- iio_trigger_put(t->trig);
+ iio_trigger_free(t->trig);
free_t:
kfree(t);
out1:
--- a/drivers/staging/iio/trigger/iio-trig-bfin-timer.c
+++ b/drivers/staging/iio/trigger/iio-trig-bfin-timer.c
@@ -259,7 +259,7 @@ out_free_irq:
out1:
iio_trigger_unregister(st->trig);
out:
- iio_trigger_put(st->trig);
+ iio_trigger_free(st->trig);
return ret;
}
@@ -272,7 +272,7 @@ static int iio_bfin_tmr_trigger_remove(s
peripheral_free(st->t->pin);
free_irq(st->irq, st);
iio_trigger_unregister(st->trig);
- iio_trigger_put(st->trig);
+ iio_trigger_free(st->trig);
return 0;
}
Patches currently in stable-queue which might be from amsfield22@gmail.com are
queue-4.4/iio-trigger-free-trigger-resource-correctly.patch
reply other threads:[~2017-11-09 17:25 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=15102482679919@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=alexander.levin@verizon.com \
--cc=amsfield22@gmail.com \
--cc=jic23@kernel.org \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).