* FAILED: patch "[PATCH] MIPS: Fix MIPS64 FP save/restore on 32-bit kernels" failed to apply to 4.4-stable tree
@ 2017-11-27 15:09 gregkh
0 siblings, 0 replies; only message in thread
From: gregkh @ 2017-11-27 15:09 UTC (permalink / raw)
To: jhogan, paul.burton, ralf, stable; +Cc: stable
The patch below does not apply to the 4.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From 22b8ba765a726d90e9830ff6134c32b04f12c10f Mon Sep 17 00:00:00 2001
From: James Hogan <jhogan@kernel.org>
Date: Mon, 3 Jul 2017 23:41:47 +0100
Subject: [PATCH] MIPS: Fix MIPS64 FP save/restore on 32-bit kernels
32-bit kernels can be configured to support MIPS64, in which case
neither CONFIG_64BIT or CONFIG_CPU_MIPS32_R* will be set. This causes
the CP0_Status.FR checks at the point of floating point register save
and restore to be compiled out, which results in odd FP registers not
being saved or restored to the task or signal context even when
CP0_Status.FR is set.
Fix the ifdefs to use CONFIG_CPU_MIPSR2 and CONFIG_CPU_MIPSR6, which are
enabled for the relevant revisions of either MIPS32 or MIPS64, along
with some other CPUs such as Octeon (r2), Loongson1 (r2), XLP (r2),
Loongson 3A R2.
The suspect code originates from commit 597ce1723e0f ("MIPS: Support for
64-bit FP with O32 binaries") in v3.14, however the code in
__enable_fpu() was consistent and refused to set FR=1, falling back to
software FPU emulation. This was suboptimal but should be functionally
correct.
Commit fcc53b5f6c38 ("MIPS: fpu.h: Allow 64-bit FPU on a 64-bit MIPS R6
CPU") in v4.2 (and stable tagged back to 4.0) later introduced the bug
by updating __enable_fpu() to set FR=1 but failing to update the other
similar ifdefs to enable FR=1 state handling.
Fixes: fcc53b5f6c38 ("MIPS: fpu.h: Allow 64-bit FPU on a 64-bit MIPS R6 CPU")
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.0+
Patchwork: https://patchwork.linux-mips.org/patch/16739/
diff --git a/arch/mips/include/asm/asmmacro.h b/arch/mips/include/asm/asmmacro.h
index 83054f79f72a..b815d7b3bd27 100644
--- a/arch/mips/include/asm/asmmacro.h
+++ b/arch/mips/include/asm/asmmacro.h
@@ -126,8 +126,8 @@
.endm
.macro fpu_save_double thread status tmp
-#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPS32_R2) || \
- defined(CONFIG_CPU_MIPS32_R6)
+#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPSR2) || \
+ defined(CONFIG_CPU_MIPSR6)
sll \tmp, \status, 5
bgez \tmp, 10f
fpu_save_16odd \thread
@@ -184,8 +184,8 @@
.endm
.macro fpu_restore_double thread status tmp
-#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPS32_R2) || \
- defined(CONFIG_CPU_MIPS32_R6)
+#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPSR2) || \
+ defined(CONFIG_CPU_MIPSR6)
sll \tmp, \status, 5
bgez \tmp, 10f # 16 register mode?
diff --git a/arch/mips/kernel/r4k_fpu.S b/arch/mips/kernel/r4k_fpu.S
index 0a83b1708b3c..8e3a6020c613 100644
--- a/arch/mips/kernel/r4k_fpu.S
+++ b/arch/mips/kernel/r4k_fpu.S
@@ -40,8 +40,8 @@
*/
LEAF(_save_fp)
EXPORT_SYMBOL(_save_fp)
-#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPS32_R2) || \
- defined(CONFIG_CPU_MIPS32_R6)
+#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPSR2) || \
+ defined(CONFIG_CPU_MIPSR6)
mfc0 t0, CP0_STATUS
#endif
fpu_save_double a0 t0 t1 # clobbers t1
@@ -52,8 +52,8 @@ EXPORT_SYMBOL(_save_fp)
* Restore a thread's fp context.
*/
LEAF(_restore_fp)
-#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPS32_R2) || \
- defined(CONFIG_CPU_MIPS32_R6)
+#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPSR2) || \
+ defined(CONFIG_CPU_MIPSR6)
mfc0 t0, CP0_STATUS
#endif
fpu_restore_double a0 t0 t1 # clobbers t1
@@ -246,11 +246,11 @@ LEAF(_save_fp_context)
cfc1 t1, fcr31
.set pop
-#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPS32_R2) || \
- defined(CONFIG_CPU_MIPS32_R6)
+#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPSR2) || \
+ defined(CONFIG_CPU_MIPSR6)
.set push
SET_HARDFLOAT
-#ifdef CONFIG_CPU_MIPS32_R2
+#ifdef CONFIG_CPU_MIPSR2
.set mips32r2
.set fp=64
mfc0 t0, CP0_STATUS
@@ -314,11 +314,11 @@ LEAF(_save_fp_context)
LEAF(_restore_fp_context)
EX lw t1, 0(a1)
-#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPS32_R2) || \
- defined(CONFIG_CPU_MIPS32_R6)
+#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPSR2) || \
+ defined(CONFIG_CPU_MIPSR6)
.set push
SET_HARDFLOAT
-#ifdef CONFIG_CPU_MIPS32_R2
+#ifdef CONFIG_CPU_MIPSR2
.set mips32r2
.set fp=64
mfc0 t0, CP0_STATUS
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2017-11-27 15:09 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-11-27 15:09 FAILED: patch "[PATCH] MIPS: Fix MIPS64 FP save/restore on 32-bit kernels" failed to apply to 4.4-stable tree gregkh
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).