Patch "can: peak/pci: fix potential bug when probe() fails" has been added to the 4.14-stable tree

[<gregkh@linuxfoundation.org>]

This is a note to let you know that I've just added the patch titled

    can: peak/pci: fix potential bug when probe() fails

to the 4.14-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     can-peak-pci-fix-potential-bug-when-probe-fails.patch
and it can be found in the queue-4.14 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From 5c2cb02edf79ad79d9b8d07c6d52243a948c4c9f Mon Sep 17 00:00:00 2001
From: Stephane Grosjean <s.grosjean@peak-system.com>
Date: Thu, 23 Nov 2017 15:44:35 +0100
Subject: can: peak/pci: fix potential bug when probe() fails

From: Stephane Grosjean <s.grosjean@peak-system.com>

commit 5c2cb02edf79ad79d9b8d07c6d52243a948c4c9f upstream.

PCI/PCIe drivers for PEAK-System CAN/CAN-FD interfaces do some access to the
PCI config during probing. In case one of these accesses fails, a POSITIVE
PCIBIOS_xxx error code is returned back. This POSITIVE error code MUST be
converted into a NEGATIVE errno for the probe() function to indicate it
failed. Using the pcibios_err_to_errno() function, we make sure that the
return code will always be negative.

Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/can/peak_canfd/peak_pciefd_main.c |    5 ++++-
 drivers/net/can/sja1000/peak_pci.c            |    5 ++++-
 2 files changed, 8 insertions(+), 2 deletions(-)

--- a/drivers/net/can/peak_canfd/peak_pciefd_main.c
+++ b/drivers/net/can/peak_canfd/peak_pciefd_main.c
@@ -825,7 +825,10 @@ err_release_regions:
 err_disable_pci:
 	pci_disable_device(pdev);
 
-	return err;
+	/* pci_xxx_config_word() return positive PCIBIOS_xxx error codes while
+	 * the probe() function must return a negative errno in case of failure
+	 * (err is unchanged if negative) */
+	return pcibios_err_to_errno(err);
 }
 
 /* free the board structure object, as well as its resources: */
--- a/drivers/net/can/sja1000/peak_pci.c
+++ b/drivers/net/can/sja1000/peak_pci.c
@@ -717,7 +717,10 @@ failure_release_regions:
 failure_disable_pci:
 	pci_disable_device(pdev);
 
-	return err;
+	/* pci_xxx_config_word() return positive PCIBIOS_xxx error codes while
+	 * the probe() function must return a negative errno in case of failure
+	 * (err is unchanged if negative) */
+	return pcibios_err_to_errno(err);
 }
 
 static void peak_pci_remove(struct pci_dev *pdev)


Patches currently in stable-queue which might be from s.grosjean@peak-system.com are

queue-4.14/can-peak-pcie_fd-fix-potential-bug-in-restarting-tx-queue.patch
queue-4.14/can-peak-pci-fix-potential-bug-when-probe-fails.patch