stable.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: boris.ostrovsky@oracle.com, David.Laight@aculab.com,
	bp@alien8.de, bpetkov@suse.de, brgerst@gmail.com,
	dave.hansen@intel.com, dave.hansen@linux.intel.com,
	dvlasenk@redhat.com, eduval@amazon.com,
	gregkh@linuxfoundation.org, hpa@zytor.com, jgross@suse.com,
	jpoimboe@redhat.com, luto@kernel.org, mingo@kernel.org,
	peterz@infradead.org, riel@redhat.com, tglx@linutronix.de,
	torvalds@linux-foundation.org, will.deacon@arm.com
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "x86/entry/64/paravirt: Use paravirt-safe macro to access eflags" has been added to the 4.14-stable tree
Date: Thu, 21 Dec 2017 17:05:44 +0100	[thread overview]
Message-ID: <151387234480171@kroah.com> (raw)


This is a note to let you know that I've just added the patch titled

    x86/entry/64/paravirt: Use paravirt-safe macro to access eflags

to the 4.14-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     x86-entry-64-paravirt-use-paravirt-safe-macro-to-access-eflags.patch
and it can be found in the queue-4.14 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From e17f8234538d1ff708673f287a42457c4dee720d Mon Sep 17 00:00:00 2001
From: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Date: Mon, 4 Dec 2017 15:07:07 +0100
Subject: x86/entry/64/paravirt: Use paravirt-safe macro to access eflags

From: Boris Ostrovsky <boris.ostrovsky@oracle.com>

commit e17f8234538d1ff708673f287a42457c4dee720d upstream.

Commit 1d3e53e8624a ("x86/entry/64: Refactor IRQ stacks and make them
NMI-safe") added DEBUG_ENTRY_ASSERT_IRQS_OFF macro that acceses eflags
using 'pushfq' instruction when testing for IF bit. On PV Xen guests
looking at IF flag directly will always see it set, resulting in 'ud2'.

Introduce SAVE_FLAGS() macro that will use appropriate save_fl pv op when
running paravirt.

Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Laight <David.Laight@aculab.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Eduardo Valentin <eduval@amazon.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: aliguori@amazon.com
Cc: daniel.gruss@iaik.tugraz.at
Cc: hughd@google.com
Cc: keescook@google.com
Cc: xen-devel@lists.xenproject.org
Link: https://lkml.kernel.org/r/20171204150604.899457242@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/entry/entry_64.S        |    7 ++++---
 arch/x86/include/asm/irqflags.h  |    3 +++
 arch/x86/include/asm/paravirt.h  |    9 +++++++++
 arch/x86/kernel/asm-offsets_64.c |    3 +++
 4 files changed, 19 insertions(+), 3 deletions(-)

--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -462,12 +462,13 @@ END(irq_entries_start)
 
 .macro DEBUG_ENTRY_ASSERT_IRQS_OFF
 #ifdef CONFIG_DEBUG_ENTRY
-	pushfq
-	testl $X86_EFLAGS_IF, (%rsp)
+	pushq %rax
+	SAVE_FLAGS(CLBR_RAX)
+	testl $X86_EFLAGS_IF, %eax
 	jz .Lokay_\@
 	ud2
 .Lokay_\@:
-	addq $8, %rsp
+	popq %rax
 #endif
 .endm
 
--- a/arch/x86/include/asm/irqflags.h
+++ b/arch/x86/include/asm/irqflags.h
@@ -142,6 +142,9 @@ static inline notrace unsigned long arch
 	swapgs;					\
 	sysretl
 
+#ifdef CONFIG_DEBUG_ENTRY
+#define SAVE_FLAGS(x)		pushfq; popq %rax
+#endif
 #else
 #define INTERRUPT_RETURN		iret
 #define ENABLE_INTERRUPTS_SYSEXIT	sti; sysexit
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -927,6 +927,15 @@ extern void default_banner(void);
 	PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_usergs_sysret64),	\
 		  CLBR_NONE,						\
 		  jmp PARA_INDIRECT(pv_cpu_ops+PV_CPU_usergs_sysret64))
+
+#ifdef CONFIG_DEBUG_ENTRY
+#define SAVE_FLAGS(clobbers)                                        \
+	PARA_SITE(PARA_PATCH(pv_irq_ops, PV_IRQ_save_fl), clobbers, \
+		  PV_SAVE_REGS(clobbers | CLBR_CALLEE_SAVE);        \
+		  call PARA_INDIRECT(pv_irq_ops+PV_IRQ_save_fl);    \
+		  PV_RESTORE_REGS(clobbers | CLBR_CALLEE_SAVE);)
+#endif
+
 #endif	/* CONFIG_X86_32 */
 
 #endif /* __ASSEMBLY__ */
--- a/arch/x86/kernel/asm-offsets_64.c
+++ b/arch/x86/kernel/asm-offsets_64.c
@@ -23,6 +23,9 @@ int main(void)
 #ifdef CONFIG_PARAVIRT
 	OFFSET(PV_CPU_usergs_sysret64, pv_cpu_ops, usergs_sysret64);
 	OFFSET(PV_CPU_swapgs, pv_cpu_ops, swapgs);
+#ifdef CONFIG_DEBUG_ENTRY
+	OFFSET(PV_IRQ_save_fl, pv_irq_ops, save_fl);
+#endif
 	BLANK();
 #endif
 


Patches currently in stable-queue which might be from boris.ostrovsky@oracle.com are

queue-4.14/x86-entry-64-move-the-ist-stacks-into-struct-cpu_entry_area.patch
queue-4.14/x86-dumpstack-add-get_stack_info-support-for-the-sysenter-stack.patch
queue-4.14/x86-virt-add-enum-for-hypervisors-to-replace-x86_hyper.patch
queue-4.14/x86-entry-remap-the-tss-into-the-cpu-entry-area.patch
queue-4.14/x86-entry-64-paravirt-use-paravirt-safe-macro-to-access-eflags.patch
queue-4.14/x86-mm-fixmap-generalize-the-gdt-fixmap-mechanism-introduce-struct-cpu_entry_area.patch
queue-4.14/x86-paravirt-dont-patch-flush_tlb_single.patch
queue-4.14/x86-dumpstack-handle-stack-overflow-on-all-stacks.patch
queue-4.14/x86-entry-64-return-to-userspace-from-the-trampoline-stack.patch
queue-4.14/x86-paravirt-provide-a-way-to-check-for-hypervisors.patch
queue-4.14/x86-entry-64-create-a-per-cpu-syscall-entry-trampoline.patch
queue-4.14/x86-xen-64-x86-entry-64-clean-up-sp-code-in-cpu_initialize_context.patch
queue-4.14/x86-entry-64-de-xen-ify-our-nmi-code.patch
queue-4.14/objtool-don-t-report-end-of-section-error-after-an-empty-unwind-hint.patch
queue-4.14/x86-entry-64-use-a-per-cpu-trampoline-stack-for-idt-entries.patch
queue-4.14/x86-cpufeatures-make-cpu-bugs-sticky.patch
queue-4.14/x86-espfix-64-stop-assuming-that-pt_regs-is-on-the-entry-stack.patch
queue-4.14/x86-xen-fix-xen-head-elf-annotations.patch
queue-4.14/x86-entry-move-sysenter_stack-to-the-beginning-of-struct-tss_struct.patch
queue-4.14/x86-entry-64-allocate-and-enable-the-sysenter-stack.patch
queue-4.14/x86-unwinder-orc-dont-bail-on-stack-overflow.patch
queue-4.14/x86-head-fix-head-elf-function-annotations.patch
queue-4.14/x86-head-add-unwind-hint-annotations.patch
queue-4.14/x86-head-remove-unused-bad_address-code.patch
queue-4.14/x86-xen-add-unwind-hint-annotations.patch
queue-4.14/x86-kasan-64-teach-kasan-about-the-cpu_entry_area.patch
queue-4.14/x86-head-remove-confusing-comment.patch
queue-4.14/x86-entry-64-remove-the-sysenter-stack-canary.patch
queue-4.14/x86-entry-gdt-put-per-cpu-gdt-remaps-in-ascending-order.patch
queue-4.14/x86-entry-fix-assumptions-that-the-hw-tss-is-at-the-beginning-of-cpu_tss.patch
queue-4.14/x86-entry-64-make-cpu_entry_area.tss-read-only.patch
queue-4.14/x86-virt-x86-platform-merge-struct-x86_hyper-into-struct-x86_platform-and-struct-x86_init.patch
queue-4.14/x86-unwinder-handle-stack-overflows-more-gracefully.patch
queue-4.14/x86-irq-64-print-the-offending-ip-in-the-stack-overflow-warning.patch
queue-4.14/x86-entry-clean-up-the-sysenter_stack-code.patch
queue-4.14/x86-entry-64-separate-cpu_current_top_of_stack-from-tss.sp0.patch
queue-4.14/x86-boot-annotate-verify_cpu-as-a-callable-function.patch
queue-4.14/x86-irq-remove-an-old-outdated-comment-about-context-tracking-races.patch

                 reply	other threads:[~2017-12-21 16:50 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=151387234480171@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=David.Laight@aculab.com \
    --cc=boris.ostrovsky@oracle.com \
    --cc=bp@alien8.de \
    --cc=bpetkov@suse.de \
    --cc=brgerst@gmail.com \
    --cc=dave.hansen@intel.com \
    --cc=dave.hansen@linux.intel.com \
    --cc=dvlasenk@redhat.com \
    --cc=eduval@amazon.com \
    --cc=hpa@zytor.com \
    --cc=jgross@suse.com \
    --cc=jpoimboe@redhat.com \
    --cc=luto@kernel.org \
    --cc=mingo@kernel.org \
    --cc=peterz@infradead.org \
    --cc=riel@redhat.com \
    --cc=stable-commits@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=tglx@linutronix.de \
    --cc=torvalds@linux-foundation.org \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).