From: <gregkh@linuxfoundation.org>
To: luto@kernel.org, boris.ostrovsky@oracle.com, bpetkov@suse.de,
brgerst@gmail.com, dave.hansen@intel.com,
gregkh@linuxfoundation.org, jgross@suse.com, mingo@kernel.org,
peterz@infradead.org, tglx@linutronix.de,
torvalds@linux-foundation.org
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "x86/xen/64, x86/entry/64: Clean up SP code in cpu_initialize_context()" has been added to the 4.14-stable tree
Date: Thu, 21 Dec 2017 17:06:08 +0100 [thread overview]
Message-ID: <1513872368147148@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
x86/xen/64, x86/entry/64: Clean up SP code in cpu_initialize_context()
to the 4.14-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
x86-xen-64-x86-entry-64-clean-up-sp-code-in-cpu_initialize_context.patch
and it can be found in the queue-4.14 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From f16b3da1dc936c0f8121741d0a1731bf242f2f56 Mon Sep 17 00:00:00 2001
From: Andy Lutomirski <luto@kernel.org>
Date: Thu, 2 Nov 2017 00:59:12 -0700
Subject: x86/xen/64, x86/entry/64: Clean up SP code in cpu_initialize_context()
From: Andy Lutomirski <luto@kernel.org>
commit f16b3da1dc936c0f8121741d0a1731bf242f2f56 upstream.
I'm removing thread_struct::sp0, and Xen's usage of it is slightly
dubious and unnecessary. Use appropriate helpers instead.
While we're at at, reorder the code slightly to make it more obvious
what's going on.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/d5b9a3da2b47c68325bd2bbe8f82d9554dee0d0f.1509609304.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/xen/smp_pv.c | 17 ++++++++++++++---
1 file changed, 14 insertions(+), 3 deletions(-)
--- a/arch/x86/xen/smp_pv.c
+++ b/arch/x86/xen/smp_pv.c
@@ -14,6 +14,7 @@
* single-threaded.
*/
#include <linux/sched.h>
+#include <linux/sched/task_stack.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/smp.h>
@@ -294,12 +295,19 @@ cpu_initialize_context(unsigned int cpu,
#endif
memset(&ctxt->fpu_ctxt, 0, sizeof(ctxt->fpu_ctxt));
+ /*
+ * Bring up the CPU in cpu_bringup_and_idle() with the stack
+ * pointing just below where pt_regs would be if it were a normal
+ * kernel entry.
+ */
ctxt->user_regs.eip = (unsigned long)cpu_bringup_and_idle;
ctxt->flags = VGCF_IN_KERNEL;
ctxt->user_regs.eflags = 0x1000; /* IOPL_RING1 */
ctxt->user_regs.ds = __USER_DS;
ctxt->user_regs.es = __USER_DS;
ctxt->user_regs.ss = __KERNEL_DS;
+ ctxt->user_regs.cs = __KERNEL_CS;
+ ctxt->user_regs.esp = (unsigned long)task_pt_regs(idle);
xen_copy_trap_info(ctxt->trap_ctxt);
@@ -314,8 +322,13 @@ cpu_initialize_context(unsigned int cpu,
ctxt->gdt_frames[0] = gdt_mfn;
ctxt->gdt_ents = GDT_ENTRIES;
+ /*
+ * Set SS:SP that Xen will use when entering guest kernel mode
+ * from guest user mode. Subsequent calls to load_sp0() can
+ * change this value.
+ */
ctxt->kernel_ss = __KERNEL_DS;
- ctxt->kernel_sp = idle->thread.sp0;
+ ctxt->kernel_sp = task_top_of_stack(idle);
#ifdef CONFIG_X86_32
ctxt->event_callback_cs = __KERNEL_CS;
@@ -327,10 +340,8 @@ cpu_initialize_context(unsigned int cpu,
(unsigned long)xen_hypervisor_callback;
ctxt->failsafe_callback_eip =
(unsigned long)xen_failsafe_callback;
- ctxt->user_regs.cs = __KERNEL_CS;
per_cpu(xen_cr3, cpu) = __pa(swapper_pg_dir);
- ctxt->user_regs.esp = idle->thread.sp0 - sizeof(struct pt_regs);
ctxt->ctrlreg[3] = xen_pfn_to_cr3(virt_to_gfn(swapper_pg_dir));
if (HYPERVISOR_vcpu_op(VCPUOP_initialise, xen_vcpu_nr(cpu), ctxt))
BUG();
Patches currently in stable-queue which might be from luto@kernel.org are
queue-4.14/x86-entry-64-simplify-reg-restore-code-in-the-standard-iret-paths.patch
queue-4.14/x86-cpufeatures-fix-various-details-in-the-feature-definitions.patch
queue-4.14/x86-entry-64-move-the-ist-stacks-into-struct-cpu_entry_area.patch
queue-4.14/x86-dumpstack-add-get_stack_info-support-for-the-sysenter-stack.patch
queue-4.14/x86-asm-don-t-use-the-confusing-.ifeq-directive.patch
queue-4.14/selftests-x86-ldt_gdt-add-infrastructure-to-test-set_thread_area.patch
queue-4.14/x86-entry-remap-the-tss-into-the-cpu-entry-area.patch
queue-4.14/x86-entry-64-paravirt-use-paravirt-safe-macro-to-access-eflags.patch
queue-4.14/x86-mm-fixmap-generalize-the-gdt-fixmap-mechanism-introduce-struct-cpu_entry_area.patch
queue-4.14/x86-paravirt-dont-patch-flush_tlb_single.patch
queue-4.14/x86-dumpstack-handle-stack-overflow-on-all-stacks.patch
queue-4.14/x86-entry-64-use-pop-instead-of-movq-in-syscall_return_via_sysret.patch
queue-4.14/x86-entry-64-return-to-userspace-from-the-trampoline-stack.patch
queue-4.14/x86-paravirt-provide-a-way-to-check-for-hypervisors.patch
queue-4.14/xen-x86-entry-64-add-xen-nmi-trap-entry.patch
queue-4.14/x86-entry-64-remove-the-restore_c_regs_and_iret-label.patch
queue-4.14/x86-entry-64-create-a-per-cpu-syscall-entry-trampoline.patch
queue-4.14/x86-entry-64-remove-the-restore_..._regs-infrastructure.patch
queue-4.14/x86-xen-64-x86-entry-64-clean-up-sp-code-in-cpu_initialize_context.patch
queue-4.14/x86-entry-add-task_top_of_stack-to-find-the-top-of-a-task-s-stack.patch
queue-4.14/x86-entry-64-remove-all-remaining-direct-thread_struct-sp0-reads.patch
queue-4.14/x86-boot-relocate-definition-of-the-initial-state-of-cr0.patch
queue-4.14/x86-entry-64-stop-initializing-tss.sp0-at-boot.patch
queue-4.14/x86-entry-64-de-xen-ify-our-nmi-code.patch
queue-4.14/objtool-don-t-report-end-of-section-error-after-an-empty-unwind-hint.patch
queue-4.14/x86-entry-64-pass-sp0-directly-to-load_sp0.patch
queue-4.14/x86-entry-64-use-a-per-cpu-trampoline-stack-for-idt-entries.patch
queue-4.14/x86-entry-64-move-swapgs-into-the-common-iret-to-usermode-path.patch
queue-4.14/x86-entry-64-shorten-test-instructions.patch
queue-4.14/x86-cpufeature-add-user-mode-instruction-prevention-definitions.patch
queue-4.14/x86-cpufeatures-make-cpu-bugs-sticky.patch
queue-4.14/x86-espfix-64-stop-assuming-that-pt_regs-is-on-the-entry-stack.patch
queue-4.14/x86-traps-use-a-new-on_thread_stack-helper-to-clean-up-an-assertion.patch
queue-4.14/x86-xen-fix-xen-head-elf-annotations.patch
queue-4.14/x86-entry-64-remove-thread_struct-sp0.patch
queue-4.14/x86-entry-move-sysenter_stack-to-the-beginning-of-struct-tss_struct.patch
queue-4.14/x86-entry-64-allocate-and-enable-the-sysenter-stack.patch
queue-4.14/x86-unwinder-orc-dont-bail-on-stack-overflow.patch
queue-4.14/x86-head-fix-head-elf-function-annotations.patch
queue-4.14/selftests-x86-ldt_gdt-run-most-existing-ldt-test-cases-against-the-gdt-as-well.patch
queue-4.14/x86-entry-32-pull-the-msr_ia32_sysenter_cs-update-code-out-of-native_load_sp0.patch
queue-4.14/x86-entry-64-split-the-iret-to-user-and-iret-to-kernel-paths.patch
queue-4.14/x86-entry-64-shrink-paranoid_exit_restore-and-make-labels-local.patch
queue-4.14/x86-head-add-unwind-hint-annotations.patch
queue-4.14/x86-head-remove-unused-bad_address-code.patch
queue-4.14/x86-xen-add-unwind-hint-annotations.patch
queue-4.14/x86-kasan-64-teach-kasan-about-the-cpu_entry_area.patch
queue-4.14/x86-head-remove-confusing-comment.patch
queue-4.14/x86-entry-64-remove-the-sysenter-stack-canary.patch
queue-4.14/x86-mm-kasan-don-t-use-vmemmap_populate-to-initialize-shadow.patch
queue-4.14/x86-entry-gdt-put-per-cpu-gdt-remaps-in-ascending-order.patch
queue-4.14/x86-entry-fix-assumptions-that-the-hw-tss-is-at-the-beginning-of-cpu_tss.patch
queue-4.14/x86-cpufeatures-re-tabulate-the-x86_feature-definitions.patch
queue-4.14/x86-entry-32-fix-cpu_current_top_of_stack-initialization-at-boot.patch
queue-4.14/ptrace-x86-make-user_64bit_mode-available-to-32-bit-builds.patch
queue-4.14/x86-entry-64-make-cpu_entry_area.tss-read-only.patch
queue-4.14/x86-mm-relocate-page-fault-error-codes-to-traps.h.patch
queue-4.14/x86-unwinder-handle-stack-overflows-more-gracefully.patch
queue-4.14/x86-entry-64-use-pop-instead-of-mov-to-restore-regs-on-nmi-return.patch
queue-4.14/x86-irq-64-print-the-offending-ip-in-the-stack-overflow-warning.patch
queue-4.14/x86-entry-clean-up-the-sysenter_stack-code.patch
queue-4.14/x86-entry-64-merge-the-fast-and-slow-sysret-paths.patch
queue-4.14/x86-entry-64-separate-cpu_current_top_of_stack-from-tss.sp0.patch
queue-4.14/x86-boot-annotate-verify_cpu-as-a-callable-function.patch
queue-4.14/x86-irq-remove-an-old-outdated-comment-about-context-tracking-races.patch
reply other threads:[~2017-12-21 16:52 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1513872368147148@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=boris.ostrovsky@oracle.com \
--cc=bpetkov@suse.de \
--cc=brgerst@gmail.com \
--cc=dave.hansen@intel.com \
--cc=jgross@suse.com \
--cc=luto@kernel.org \
--cc=mingo@kernel.org \
--cc=peterz@infradead.org \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=tglx@linutronix.de \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).