Patch "s390/qeth: don't apply takeover changes to RXIP" has been added to the 4.9-stable tree

Patch "s390/qeth: don't apply takeover changes to RXIP" has been added to the 4.9-stable tree

[gregkh]

This is a note to let you know that I've just added the patch titled

    s390/qeth: don't apply takeover changes to RXIP

to the 4.9-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     s390-qeth-don-t-apply-takeover-changes-to-rxip.patch
and it can be found in the queue-4.9 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From foo@baz Sun Dec 31 11:13:15 CET 2017
From: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Date: Wed, 13 Dec 2017 18:56:30 +0100
Subject: s390/qeth: don't apply takeover changes to RXIP

From: Julian Wiedmann <jwi@linux.vnet.ibm.com>


[ Upstream commit b22d73d6689fd902a66c08ebe71ab2f3b351e22f ]

When takeover is switched off, current code clears the 'TAKEOVER' flag on
all IPs. But the flag is also used for RXIP addresses, and those should
not be affected by the takeover mode.
Fix the behaviour by consistenly applying takover logic to NORMAL
addresses only.

Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/s390/net/qeth_l3_main.c |    5 +++--
 drivers/s390/net/qeth_l3_sys.c  |    5 +++--
 2 files changed, 6 insertions(+), 4 deletions(-)

--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -178,6 +178,8 @@ int qeth_l3_is_addr_covered_by_ipato(str
 
 	if (!card->ipato.enabled)
 		return 0;
+	if (addr->type != QETH_IP_TYPE_NORMAL)
+		return 0;
 
 	qeth_l3_convert_addr_to_bits((u8 *) &addr->u, addr_bits,
 				  (addr->proto == QETH_PROT_IPV4)? 4:16);
@@ -293,8 +295,7 @@ int qeth_l3_add_ip(struct qeth_card *car
 		memcpy(addr, tmp_addr, sizeof(struct qeth_ipaddr));
 		addr->ref_counter = 1;
 
-		if (addr->type == QETH_IP_TYPE_NORMAL  &&
-				qeth_l3_is_addr_covered_by_ipato(card, addr)) {
+		if (qeth_l3_is_addr_covered_by_ipato(card, addr)) {
 			QETH_CARD_TEXT(card, 2, "tkovaddr");
 			addr->set_flags |= QETH_IPA_SETIP_TAKEOVER_FLAG;
 		}
--- a/drivers/s390/net/qeth_l3_sys.c
+++ b/drivers/s390/net/qeth_l3_sys.c
@@ -398,10 +398,11 @@ static ssize_t qeth_l3_dev_ipato_enable_
 	card->ipato.enabled = enable;
 
 	hash_for_each(card->ip_htable, i, addr, hnode) {
+		if (addr->type != QETH_IP_TYPE_NORMAL)
+			continue;
 		if (!enable)
 			addr->set_flags &= ~QETH_IPA_SETIP_TAKEOVER_FLAG;
-		else if (addr->type == QETH_IP_TYPE_NORMAL &&
-			 qeth_l3_is_addr_covered_by_ipato(card, addr))
+		else if (qeth_l3_is_addr_covered_by_ipato(card, addr))
 			addr->set_flags |= QETH_IPA_SETIP_TAKEOVER_FLAG;
 	}
 out:


Patches currently in stable-queue which might be from jwi@linux.vnet.ibm.com are

queue-4.9/s390-qeth-lock-ip-table-while-applying-takeover-changes.patch
queue-4.9/s390-qeth-apply-takeover-changes-when-mode-is-toggled.patch
queue-4.9/s390-qeth-update-takeover-ips-after-configuration-change.patch
queue-4.9/s390-qeth-don-t-apply-takeover-changes-to-rxip.patch