From: <gregkh@linuxfoundation.org>
To: aryabinin@virtuozzo.com, gregkh@linuxfoundation.org,
kubakici@wp.pl, luto@kernel.org, tglx@linutronix.de,
thgarnie@google.com
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "x86/mm: Set MODULES_END to 0xffffffffff000000" has been added to the 4.14-stable tree
Date: Fri, 05 Jan 2018 23:06:47 +0100 [thread overview]
Message-ID: <151519000716474@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
x86/mm: Set MODULES_END to 0xffffffffff000000
to the 4.14-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
x86-mm-set-modules_end-to-0xffffffffff000000.patch
and it can be found in the queue-4.14 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From f5a40711fa58f1c109165a4fec6078bf2dfd2bdc Mon Sep 17 00:00:00 2001
From: Andrey Ryabinin <aryabinin@virtuozzo.com>
Date: Thu, 28 Dec 2017 19:06:20 +0300
Subject: x86/mm: Set MODULES_END to 0xffffffffff000000
From: Andrey Ryabinin <aryabinin@virtuozzo.com>
commit f5a40711fa58f1c109165a4fec6078bf2dfd2bdc upstream.
Since f06bdd4001c2 ("x86/mm: Adapt MODULES_END based on fixmap section size")
kasan_mem_to_shadow(MODULES_END) could be not aligned to a page boundary.
So passing page unaligned address to kasan_populate_zero_shadow() have two
possible effects:
1) It may leave one page hole in supposed to be populated area. After commit
21506525fb8d ("x86/kasan/64: Teach KASAN about the cpu_entry_area") that
hole happens to be in the shadow covering fixmap area and leads to crash:
BUG: unable to handle kernel paging request at fffffbffffe8ee04
RIP: 0010:check_memory_region+0x5c/0x190
Call Trace:
<NMI>
memcpy+0x1f/0x50
ghes_copy_tofrom_phys+0xab/0x180
ghes_read_estatus+0xfb/0x280
ghes_notify_nmi+0x2b2/0x410
nmi_handle+0x115/0x2c0
default_do_nmi+0x57/0x110
do_nmi+0xf8/0x150
end_repeat_nmi+0x1a/0x1e
Note, the crash likely disappeared after commit 92a0f81d8957, which
changed kasan_populate_zero_shadow() call the way it was before
commit 21506525fb8d.
2) Attempt to load module near MODULES_END will fail, because
__vmalloc_node_range() called from kasan_module_alloc() will hit the
WARN_ON(!pte_none(*pte)) in the vmap_pte_range() and bail out with error.
To fix this we need to make kasan_mem_to_shadow(MODULES_END) page aligned
which means that MODULES_END should be 8*PAGE_SIZE aligned.
The whole point of commit f06bdd4001c2 was to move MODULES_END down if
NR_CPUS is big, so the cpu_entry_area takes a lot of space.
But since 92a0f81d8957 ("x86/cpu_entry_area: Move it out of the fixmap")
the cpu_entry_area is no longer in fixmap, so we could just set
MODULES_END to a fixed 8*PAGE_SIZE aligned address.
Fixes: f06bdd4001c2 ("x86/mm: Adapt MODULES_END based on fixmap section size")
Reported-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Thomas Garnier <thgarnie@google.com>
Link: https://lkml.kernel.org/r/20171228160620.23818-1-aryabinin@virtuozzo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
Documentation/x86/x86_64/mm.txt | 5 +----
arch/x86/include/asm/pgtable_64_types.h | 2 +-
2 files changed, 2 insertions(+), 5 deletions(-)
--- a/Documentation/x86/x86_64/mm.txt
+++ b/Documentation/x86/x86_64/mm.txt
@@ -43,7 +43,7 @@ ffffff0000000000 - ffffff7fffffffff (=39
ffffffef00000000 - fffffffeffffffff (=64 GB) EFI region mapping space
... unused hole ...
ffffffff80000000 - ffffffff9fffffff (=512 MB) kernel text mapping, from phys 0
-ffffffffa0000000 - [fixmap start] (~1526 MB) module mapping space
+ffffffffa0000000 - fffffffffeffffff (1520 MB) module mapping space
[fixmap start] - ffffffffff5fffff kernel-internal fixmap range
ffffffffff600000 - ffffffffff600fff (=4 kB) legacy vsyscall ABI
ffffffffffe00000 - ffffffffffffffff (=2 MB) unused hole
@@ -67,9 +67,6 @@ memory window (this size is arbitrary, i
The mappings are not part of any other kernel PGD and are only available
during EFI runtime calls.
-The module mapping space size changes based on the CONFIG requirements for the
-following fixmap section.
-
Note that if CONFIG_RANDOMIZE_MEMORY is enabled, the direct mapping of all
physical memory, vmalloc/ioremap space and virtual memory map are randomized.
Their order is preserved but their base will be offset early at boot time.
--- a/arch/x86/include/asm/pgtable_64_types.h
+++ b/arch/x86/include/asm/pgtable_64_types.h
@@ -104,7 +104,7 @@ typedef struct { pteval_t pte; } pte_t;
#define MODULES_VADDR (__START_KERNEL_map + KERNEL_IMAGE_SIZE)
/* The module sections ends with the start of the fixmap */
-#define MODULES_END __fix_to_virt(__end_of_fixed_addresses + 1)
+#define MODULES_END _AC(0xffffffffff000000, UL)
#define MODULES_LEN (MODULES_END - MODULES_VADDR)
#define ESPFIX_PGD_ENTRY _AC(-2, UL)
Patches currently in stable-queue which might be from aryabinin@virtuozzo.com are
queue-4.14/x86-mm-set-modules_end-to-0xffffffffff000000.patch
reply other threads:[~2018-01-05 22:07 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=151519000716474@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=aryabinin@virtuozzo.com \
--cc=kubakici@wp.pl \
--cc=luto@kernel.org \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=tglx@linutronix.de \
--cc=thgarnie@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).