From: "Nicholas A. Bellinger" <nab@linux-iscsi.org>
To: target-devel <target-devel@vger.kernel.org>
Cc: stable <stable@vger.kernel.org>,
Greg-KH <gregkh@linuxfoundation.org>,
Nicholas Bellinger <nab@linux-iscsi.org>,
Donald White <dew@datera.io>, Mike Christie <mchristi@redhat.com>,
Hannes Reinecke <hare@suse.com>
Subject: [PATCH-4.9.y 2/2] target: Avoid early CMD_T_PRE_EXECUTE failures during ABORT_TASK
Date: Fri, 12 Jan 2018 23:46:28 +0000 [thread overview]
Message-ID: <1515800788-31016-3-git-send-email-nab@linux-iscsi.org> (raw)
In-Reply-To: <1515800788-31016-1-git-send-email-nab@linux-iscsi.org>
From: Nicholas Bellinger <nab@linux-iscsi.org>
commit 1c21a48055a67ceb693e9c2587824a8de60a217c upstream.
This patch fixes bug where early se_cmd exceptions that occur
before backend execution can result in use-after-free if/when
a subsequent ABORT_TASK occurs for the same tag.
Since an early se_cmd exception will have had se_cmd added to
se_session->sess_cmd_list via target_get_sess_cmd(), it will
not have CMD_T_COMPLETE set by the usual target_complete_cmd()
backend completion path.
This causes a subsequent ABORT_TASK + __target_check_io_state()
to signal ABORT_TASK should proceed. As core_tmr_abort_task()
executes, it will bring the outstanding se_cmd->cmd_kref count
down to zero releasing se_cmd, after se_cmd has already been
queued with error status into fabric driver response path code.
To address this bug, introduce a CMD_T_PRE_EXECUTE bit that is
set at target_get_sess_cmd() time, and cleared immediately before
backend driver dispatch in target_execute_cmd() once CMD_T_ACTIVE
is set.
Then, check CMD_T_PRE_EXECUTE within __target_check_io_state() to
determine when an early exception has occured, and avoid aborting
this se_cmd since it will have already been queued into fabric
driver response path code.
Reported-by: Donald White <dew@datera.io>
Cc: Donald White <dew@datera.io>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
---
drivers/target/target_core_tmr.c | 9 +++++++++
drivers/target/target_core_transport.c | 2 ++
include/target/target_core_base.h | 1 +
3 files changed, 12 insertions(+)
diff --git a/drivers/target/target_core_tmr.c b/drivers/target/target_core_tmr.c
index 27dd1e1..14bb2db 100644
--- a/drivers/target/target_core_tmr.c
+++ b/drivers/target/target_core_tmr.c
@@ -133,6 +133,15 @@ static bool __target_check_io_state(struct se_cmd *se_cmd,
spin_unlock(&se_cmd->t_state_lock);
return false;
}
+ if (se_cmd->transport_state & CMD_T_PRE_EXECUTE) {
+ if (se_cmd->scsi_status) {
+ pr_debug("Attempted to abort io tag: %llu early failure"
+ " status: 0x%02x\n", se_cmd->tag,
+ se_cmd->scsi_status);
+ spin_unlock(&se_cmd->t_state_lock);
+ return false;
+ }
+ }
if (sess->sess_tearing_down || se_cmd->cmd_wait_set) {
pr_debug("Attempted to abort io tag: %llu already shutdown,"
" skipping\n", se_cmd->tag);
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index 4c0782c..6f3eccf 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -1939,6 +1939,7 @@ void target_execute_cmd(struct se_cmd *cmd)
}
cmd->t_state = TRANSPORT_PROCESSING;
+ cmd->transport_state &= ~CMD_T_PRE_EXECUTE;
cmd->transport_state |= CMD_T_ACTIVE|CMD_T_BUSY|CMD_T_SENT;
spin_unlock_irq(&cmd->t_state_lock);
@@ -2592,6 +2593,7 @@ int target_get_sess_cmd(struct se_cmd *se_cmd, bool ack_kref)
ret = -ESHUTDOWN;
goto out;
}
+ se_cmd->transport_state |= CMD_T_PRE_EXECUTE;
list_add_tail(&se_cmd->se_cmd_list, &se_sess->sess_cmd_list);
out:
spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags);
diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h
index eb3b23b..30f99ce 100644
--- a/include/target/target_core_base.h
+++ b/include/target/target_core_base.h
@@ -493,6 +493,7 @@ struct se_cmd {
#define CMD_T_BUSY (1 << 9)
#define CMD_T_TAS (1 << 10)
#define CMD_T_FABRIC_STOP (1 << 11)
+#define CMD_T_PRE_EXECUTE (1 << 12)
spinlock_t t_state_lock;
struct kref cmd_kref;
struct completion t_transport_stop_comp;
--
1.8.5.3
next prev parent reply other threads:[~2018-01-12 23:39 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-12 23:46 [PATCH-4.9.y 0/2] target: stable backports Nicholas A. Bellinger
2018-01-12 23:46 ` [PATCH-4.9.y 1/2] iscsi-target: Make TASK_REASSIGN use proper se_cmd->cmd_kref Nicholas A. Bellinger
2018-01-12 23:46 ` Nicholas A. Bellinger [this message]
2018-01-13 17:33 ` [PATCH-4.9.y 0/2] target: stable backports Greg-KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1515800788-31016-3-git-send-email-nab@linux-iscsi.org \
--to=nab@linux-iscsi.org \
--cc=dew@datera.io \
--cc=gregkh@linuxfoundation.org \
--cc=hare@suse.com \
--cc=mchristi@redhat.com \
--cc=stable@vger.kernel.org \
--cc=target-devel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).