stable.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* Patch "tls: Use correct sk->sk_prot for IPV6" has been added to the 4.15-stable tree
@ 2018-03-07  3:31 gregkh
  0 siblings, 0 replies; only message in thread
From: gregkh @ 2018-03-07  3:31 UTC (permalink / raw)
  To: borisp, davem, gregkh, ilyal; +Cc: stable, stable-commits


This is a note to let you know that I've just added the patch titled

    tls: Use correct sk->sk_prot for IPV6

to the 4.15-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     tls-use-correct-sk-sk_prot-for-ipv6.patch
and it can be found in the queue-4.15 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From foo@baz Tue Mar  6 19:02:56 PST 2018
From: Boris Pismenny <borisp@mellanox.com>
Date: Tue, 27 Feb 2018 14:18:39 +0200
Subject: tls: Use correct sk->sk_prot for IPV6

From: Boris Pismenny <borisp@mellanox.com>


[ Upstream commit c113187d38ff85dc302a1bb55864b203ebb2ba10 ]

The tls ulp overrides sk->prot with a new tls specific proto structs.
The tls specific structs were previously based on the ipv4 specific
tcp_prot sturct.
As a result, attaching the tls ulp to an ipv6 tcp socket replaced
some ipv6 callback with the ipv4 equivalents.

This patch adds ipv6 tls proto structs and uses them when
attached to ipv6 sockets.

Fixes: 3c4d7559159b ('tls: kernel TLS support')
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/tls/tls_main.c |   52 +++++++++++++++++++++++++++++++++++++---------------
 1 file changed, 37 insertions(+), 15 deletions(-)

--- a/net/tls/tls_main.c
+++ b/net/tls/tls_main.c
@@ -46,16 +46,26 @@ MODULE_DESCRIPTION("Transport Layer Secu
 MODULE_LICENSE("Dual BSD/GPL");
 
 enum {
+	TLSV4,
+	TLSV6,
+	TLS_NUM_PROTS,
+};
+
+enum {
 	TLS_BASE_TX,
 	TLS_SW_TX,
 	TLS_NUM_CONFIG,
 };
 
-static struct proto tls_prots[TLS_NUM_CONFIG];
+static struct proto *saved_tcpv6_prot;
+static DEFINE_MUTEX(tcpv6_prot_mutex);
+static struct proto tls_prots[TLS_NUM_PROTS][TLS_NUM_CONFIG];
 
 static inline void update_sk_prot(struct sock *sk, struct tls_context *ctx)
 {
-	sk->sk_prot = &tls_prots[ctx->tx_conf];
+	int ip_ver = sk->sk_family == AF_INET6 ? TLSV6 : TLSV4;
+
+	sk->sk_prot = &tls_prots[ip_ver][ctx->tx_conf];
 }
 
 int wait_on_pending_writer(struct sock *sk, long *timeo)
@@ -450,8 +460,21 @@ static int tls_setsockopt(struct sock *s
 	return do_tls_setsockopt(sk, optname, optval, optlen);
 }
 
+static void build_protos(struct proto *prot, struct proto *base)
+{
+	prot[TLS_BASE_TX] = *base;
+	prot[TLS_BASE_TX].setsockopt	= tls_setsockopt;
+	prot[TLS_BASE_TX].getsockopt	= tls_getsockopt;
+	prot[TLS_BASE_TX].close		= tls_sk_proto_close;
+
+	prot[TLS_SW_TX] = prot[TLS_BASE_TX];
+	prot[TLS_SW_TX].sendmsg		= tls_sw_sendmsg;
+	prot[TLS_SW_TX].sendpage	= tls_sw_sendpage;
+}
+
 static int tls_init(struct sock *sk)
 {
+	int ip_ver = sk->sk_family == AF_INET6 ? TLSV6 : TLSV4;
 	struct inet_connection_sock *icsk = inet_csk(sk);
 	struct tls_context *ctx;
 	int rc = 0;
@@ -476,6 +499,17 @@ static int tls_init(struct sock *sk)
 	ctx->getsockopt = sk->sk_prot->getsockopt;
 	ctx->sk_proto_close = sk->sk_prot->close;
 
+	/* Build IPv6 TLS whenever the address of tcpv6_prot changes */
+	if (ip_ver == TLSV6 &&
+	    unlikely(sk->sk_prot != smp_load_acquire(&saved_tcpv6_prot))) {
+		mutex_lock(&tcpv6_prot_mutex);
+		if (likely(sk->sk_prot != saved_tcpv6_prot)) {
+			build_protos(tls_prots[TLSV6], sk->sk_prot);
+			smp_store_release(&saved_tcpv6_prot, sk->sk_prot);
+		}
+		mutex_unlock(&tcpv6_prot_mutex);
+	}
+
 	ctx->tx_conf = TLS_BASE_TX;
 	update_sk_prot(sk, ctx);
 out:
@@ -488,21 +522,9 @@ static struct tcp_ulp_ops tcp_tls_ulp_op
 	.init			= tls_init,
 };
 
-static void build_protos(struct proto *prot, struct proto *base)
-{
-	prot[TLS_BASE_TX] = *base;
-	prot[TLS_BASE_TX].setsockopt	= tls_setsockopt;
-	prot[TLS_BASE_TX].getsockopt	= tls_getsockopt;
-	prot[TLS_BASE_TX].close		= tls_sk_proto_close;
-
-	prot[TLS_SW_TX] = prot[TLS_BASE_TX];
-	prot[TLS_SW_TX].sendmsg		= tls_sw_sendmsg;
-	prot[TLS_SW_TX].sendpage	= tls_sw_sendpage;
-}
-
 static int __init tls_register(void)
 {
-	build_protos(tls_prots, &tcp_prot);
+	build_protos(tls_prots[TLSV4], &tcp_prot);
 
 	tcp_register_ulp(&tcp_tls_ulp_ops);
 


Patches currently in stable-queue which might be from borisp@mellanox.com are

queue-4.15/tls-use-correct-sk-sk_prot-for-ipv6.patch

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2018-03-07  3:34 UTC | newest]

Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-03-07  3:31 Patch "tls: Use correct sk->sk_prot for IPV6" has been added to the 4.15-stable tree gregkh

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).