Patch "spi: imx: Fix failure path leak on GPIO request error correctly" has been added to the 4.15-stable tree

Patch "spi: imx: Fix failure path leak on GPIO request error correctly" has been added to the 4.15-stable tree

[gregkh]

This is a note to let you know that I've just added the patch titled

    spi: imx: Fix failure path leak on GPIO request error correctly

to the 4.15-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     spi-imx-fix-failure-path-leak-on-gpio-request-error-correctly.patch
and it can be found in the queue-4.15 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From foo@baz Fri Mar 16 15:10:48 CET 2018
From: Trent Piepho <tpiepho@impinj.com>
Date: Mon, 6 Nov 2017 10:38:23 -0800
Subject: spi: imx: Fix failure path leak on GPIO request error correctly

From: Trent Piepho <tpiepho@impinj.com>


[ Upstream commit 8197f489f4c4398391746a377c10501076b05168 ]

In commit 974488e4ce1e ("spi: imx: Fix failure path leak on GPIO request
error"), spi_bitbang_start() was moved later in the probe sequence.  But
this doesn't work, as spi_bitbang_start() has to be called before
requesting GPIOs because the GPIO data in the spi master is populated when
the master is registed, and that doesn't happen until spi_bitbang_start()
is called.  The default only works if one uses one CS.

So add a failure path call to spi_bitbang_stop() to fix the leak.

CC: Shawn Guo <shawnguo@kernel.org>
CC: Sascha Hauer <kernel@pengutronix.de>
CC: Fabio Estevam <fabio.estevam@nxp.com>
CC: Mark Brown <broonie@kernel.org>
CC: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/spi/spi-imx.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 40390d31a93b..6f57592a7f95 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -1622,6 +1622,11 @@ static int spi_imx_probe(struct platform_device *pdev)
 	spi_imx->devtype_data->intctrl(spi_imx, 0);
 
 	master->dev.of_node = pdev->dev.of_node;
+	ret = spi_bitbang_start(&spi_imx->bitbang);
+	if (ret) {
+		dev_err(&pdev->dev, "bitbang start failed with %d\n", ret);
+		goto out_clk_put;
+	}
 
 	/* Request GPIO CS lines, if any */
 	if (!spi_imx->slave_mode && master->cs_gpios) {
@@ -1640,12 +1645,6 @@ static int spi_imx_probe(struct platform_device *pdev)
 		}
 	}
 
-	ret = spi_bitbang_start(&spi_imx->bitbang);
-	if (ret) {
-		dev_err(&pdev->dev, "bitbang start failed with %d\n", ret);
-		goto out_clk_put;
-	}
-
 	dev_info(&pdev->dev, "probed\n");
 
 	clk_disable(spi_imx->clk_ipg);
-- 
2.16.2



Patches currently in stable-queue which might be from tpiepho@impinj.com are

queue-4.15/spi-imx-fix-failure-path-leak-on-gpio-request-error-correctly.patch