Patch "iio: st_pressure: st_accel: pass correct platform data to init" has been added to the 4.15-stable tree

[<gregkh@linuxfoundation.org>]

This is a note to let you know that I've just added the patch titled

    iio: st_pressure: st_accel: pass correct platform data to init

to the 4.15-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     iio-st_pressure-st_accel-pass-correct-platform-data-to-init.patch
and it can be found in the queue-4.15 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From 8b438686a001db64c21782d04ef68111e53c45d9 Mon Sep 17 00:00:00 2001
From: Michael Nosthoff <committed@heine.so>
Date: Fri, 9 Mar 2018 10:02:45 +0100
Subject: iio: st_pressure: st_accel: pass correct platform data to init

From: Michael Nosthoff <committed@heine.so>

commit 8b438686a001db64c21782d04ef68111e53c45d9 upstream.

Commit 7383d44b added a pointer pdata which get set to the default
platform_data when non was defined in the device. But it did not
pass this pointer to the st_sensors_init_sensor call but still
used the maybe uninitialized platform_data from dev.

This breaks initialization when no platform_data is given and
the optional st,drdy-int-pin devicetree option is not set.

This commit fixes this.

Cc: stable@vger.kernel.org
Fixes: 7383d44b ("iio: st_pressure: st_accel: Initialise sensor platform data properly")
Signed-off-by: Michael Nosthoff <committed@heine.so>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/accel/st_accel_core.c       |    2 +-
 drivers/iio/pressure/st_pressure_core.c |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -951,7 +951,7 @@ int st_accel_common_probe(struct iio_dev
 	if (!pdata)
 		pdata = (struct st_sensors_platform_data *)&default_accel_pdata;
 
-	err = st_sensors_init_sensor(indio_dev, adata->dev->platform_data);
+	err = st_sensors_init_sensor(indio_dev, pdata);
 	if (err < 0)
 		goto st_accel_power_off;
 
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -640,7 +640,7 @@ int st_press_common_probe(struct iio_dev
 		       press_data->sensor_settings->drdy_irq.int2.addr))
 		pdata =	(struct st_sensors_platform_data *)&default_press_pdata;
 
-	err = st_sensors_init_sensor(indio_dev, press_data->dev->platform_data);
+	err = st_sensors_init_sensor(indio_dev, pdata);
 	if (err < 0)
 		goto st_press_power_off;
 


Patches currently in stable-queue which might be from committed@heine.so are

queue-4.15/iio-st_pressure-st_accel-pass-correct-platform-data-to-init.patch