public inbox for stable@vger.kernel.org
 help / color / mirror / Atom feed
From: Chaitra P B <chaitra.basappa@broadcom.com>
To: linux-scsi@vger.kernel.org, stable@vger.kernel.org
Cc: suganath-prabu.subramani@broadcom.com,
	Sathya.Prakash@broadcom.com, sreekanth.reddy@broadcom.com,
	Chaitra P B <chaitra.basappa@broadcom.com>
Subject: [PATCH 13/15] mpt3sas: For NVME device, issue a protocol level reset  instead of hot reset and use TM timeout value exposed in PCIe Device Page  2.
Date: Fri, 30 Mar 2018 15:07:22 +0530	[thread overview]
Message-ID: <1522402644-3016-14-git-send-email-chaitra.basappa@broadcom.com> (raw)
In-Reply-To: <1522402644-3016-1-git-send-email-chaitra.basappa@broadcom.com>

1)Manufacturing Page 11 contains parameters to control
internal firmware behavior. Based on AddlFlags2 field
FW/Driver behaviour can be changed, (flag tm_custom_handling
is used for this)

a) For PCIe device, protocol level reset should be used if
flag tm_custom_handling is 0.
Since Abort Task Set, LUN reset and Target reset will result
in a protocol level reset. Drivers should issue only one type
of this reset, if that fails then it should escalate to a controller
reset (diag reset/OCR).
b) If the driver has control over the TM reset timeout value, then
driver should use the value exposed in PCIe Device Page 2 for pcie device
(field ControllerResetTO).

Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
---
 drivers/scsi/mpt3sas/mpt3sas_base.c  | 13 ++++++
 drivers/scsi/mpt3sas/mpt3sas_base.h  | 26 ++++++++++--
 drivers/scsi/mpt3sas/mpt3sas_ctl.c   | 22 +++++++++--
 drivers/scsi/mpt3sas/mpt3sas_scsih.c | 76 ++++++++++++++++++++++++++++++------
 4 files changed, 116 insertions(+), 21 deletions(-)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index 94c69aa..9dd052f 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -4145,6 +4145,7 @@ _base_static_config_pages(struct MPT3SAS_ADAPTER *ioc)
 	Mpi2ConfigReply_t mpi_reply;
 	u32 iounit_pg1_flags;
 
+	ioc->nvme_abort_timeout = 30;
 	mpt3sas_config_get_manufacturing_pg0(ioc, &mpi_reply, &ioc->manu_pg0);
 	if (ioc->ir_firmware)
 		mpt3sas_config_get_manufacturing_pg10(ioc, &mpi_reply,
@@ -4163,6 +4164,18 @@ _base_static_config_pages(struct MPT3SAS_ADAPTER *ioc)
 		mpt3sas_config_set_manufacturing_pg11(ioc, &mpi_reply,
 		    &ioc->manu_pg11);
 	}
+	if (ioc->manu_pg11.AddlFlags2 & NVME_TASK_MNGT_CUSTOM_MASK)
+		ioc->tm_custom_handling = 1;
+	else {
+		ioc->tm_custom_handling = 0;
+		if (ioc->manu_pg11.NVMeAbortTO < NVME_TASK_ABORT_MIN_TIMEOUT)
+			ioc->nvme_abort_timeout = NVME_TASK_ABORT_MIN_TIMEOUT;
+		else if (ioc->manu_pg11.NVMeAbortTO >
+					NVME_TASK_ABORT_MAX_TIMEOUT)
+			ioc->nvme_abort_timeout = NVME_TASK_ABORT_MAX_TIMEOUT;
+		else
+			ioc->nvme_abort_timeout = ioc->manu_pg11.NVMeAbortTO;
+	}
 
 	mpt3sas_config_get_bios_pg2(ioc, &mpi_reply, &ioc->bios_pg2);
 	mpt3sas_config_get_bios_pg3(ioc, &mpi_reply, &ioc->bios_pg3);
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h
index 20fe90d..6a9657e 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
@@ -146,8 +146,12 @@
 #define	NVME_CMD_PRP1_OFFSET		24	/* PRP1 offset in NVMe cmd */
 #define	NVME_CMD_PRP2_OFFSET		32	/* PRP2 offset in NVMe cmd */
 #define	NVME_ERROR_RESPONSE_SIZE	16	/* Max NVME Error Response */
+#define NVME_TASK_ABORT_MIN_TIMEOUT	6
+#define NVME_TASK_ABORT_MAX_TIMEOUT	60
+#define NVME_TASK_MNGT_CUSTOM_MASK	(0x0010)
 #define	NVME_PRP_PAGE_SIZE		4096	/* Page size */
 
+
 /*
  * reset phases
  */
@@ -363,7 +367,15 @@ struct Mpi2ManufacturingPage11_t {
 	u8	EEDPTagMode;			/* 09h */
 	u8	Reserved3;			/* 0Ah */
 	u8	Reserved4;			/* 0Bh */
-	__le32	Reserved5[23];			/* 0Ch-60h*/
+	__le32	Reserved5[8];			/* 0Ch-2Ch */
+	u16	AddlFlags2;			/* 2Ch */
+	u8	AddlFlags3;			/* 2Eh */
+	u8	Reserved6;			/* 2Fh */
+	__le32	Reserved7[7];			/* 30h - 4Bh */
+	u8	NVMeAbortTO;			/* 4Ch */
+	u8	Reserved8;			/* 4Dh */
+	u16	Reserved9;			/* 4Eh */
+	__le32	Reserved10[4];			/* 50h - 60h */
 };
 
 /**
@@ -573,6 +585,7 @@ struct _pcie_device {
 	u8	enclosure_level;
 	u8	connector_name[4];
 	u8	*serial_number;
+	u8	reset_timeout;
 	struct kref refcount;
 };
 /**
@@ -1211,6 +1224,10 @@ struct MPT3SAS_ADAPTER {
 	void		*event_log;
 	u32		event_masks[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];
 
+	u8		tm_custom_handling;
+	u8		nvme_abort_timeout;
+
+
 	/* static config pages */
 	struct mpt3sas_facts facts;
 	struct mpt3sas_port_facts *pfacts;
@@ -1470,10 +1487,11 @@ u8 mpt3sas_scsih_event_callback(struct MPT3SAS_ADAPTER *ioc, u8 msix_index,
 	u32 reply);
 void mpt3sas_scsih_reset_handler(struct MPT3SAS_ADAPTER *ioc, int reset_phase);
 
-int mpt3sas_scsih_issue_tm(struct MPT3SAS_ADAPTER *ioc, u16 handle,
-	u64 lun, u8 type, u16 smid_task, u16 msix_task, ulong timeout);
+int mpt3sas_scsih_issue_tm(struct MPT3SAS_ADAPTER *ioc, u16 handle, u64 lun,
+	u8 type, u16 smid_task, u16 msix_task, u8 timeout, u8 tr_method);
 int mpt3sas_scsih_issue_locked_tm(struct MPT3SAS_ADAPTER *ioc, u16 handle,
-	u64 lun, u8 type, u16 smid_task, u16 msix_task, ulong timeout);
+	u64 lun, u8 type, u16 smid_task, u16 msix_task,
+	u8 timeout, u8 tr_method);
 
 void mpt3sas_scsih_set_tm_flag(struct MPT3SAS_ADAPTER *ioc, u16 handle);
 void mpt3sas_scsih_clear_tm_flag(struct MPT3SAS_ADAPTER *ioc, u16 handle);
diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
index 2f27d5c..80f528d 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
@@ -647,9 +647,10 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg,
 	MPI2RequestHeader_t *mpi_request = NULL, *request;
 	MPI2DefaultReply_t *mpi_reply;
 	Mpi26NVMeEncapsulatedRequest_t *nvme_encap_request = NULL;
+	struct _pcie_device *pcie_device = NULL;
 	u32 ioc_state;
 	u16 smid;
-	unsigned long timeout;
+	u8 timeout;
 	u8 issue_reset;
 	u32 sz, sz_arg;
 	void *psge;
@@ -662,6 +663,7 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg,
 	long ret;
 	u16 wait_state_count;
 	u16 device_handle = MPT3SAS_INVALID_DEVICE_HANDLE;
+	u8 tr_method = MPI26_SCSITASKMGMT_MSGFLAGS_PROTOCOL_LVL_RST_PCIE;
 
 	issue_reset = 0;
 
@@ -1077,14 +1079,26 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg,
 				ioc->name,
 				le16_to_cpu(mpi_request->FunctionDependent1));
 			mpt3sas_halt_firmware(ioc);
-			mpt3sas_scsih_issue_locked_tm(ioc,
-			    le16_to_cpu(mpi_request->FunctionDependent1), 0,
-			    MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0, 0, 30);
+			pcie_device = mpt3sas_get_pdev_by_handle(ioc,
+				le16_to_cpu(mpi_request->FunctionDependent1));
+			if (pcie_device && (!ioc->tm_custom_handling))
+				mpt3sas_scsih_issue_locked_tm(ioc,
+				  le16_to_cpu(mpi_request->FunctionDependent1),
+				  0, MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0,
+				  0, pcie_device->reset_timeout,
+				  tr_method);
+			else
+				mpt3sas_scsih_issue_locked_tm(ioc,
+				  le16_to_cpu(mpi_request->FunctionDependent1),
+				  0, MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0,
+				  0, 30, MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET);
 		} else
 			mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
 	}
 
  out:
+	if (pcie_device)
+		pcie_device_put(pcie_device);
 
 	/* free memory associated with sg buffers */
 	if (data_in)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index dabeeaf..f5344cc 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -1088,7 +1088,7 @@ _scsih_pcie_device_remove(struct MPT3SAS_ADAPTER *ioc,
 		pcie_device->slot);
 	if (pcie_device->connector_name[0] != '\0')
 		pr_info(MPT3SAS_FMT
-			"removing enclosure level(0x%04x), connector name( %s)\n",
+		    "removing enclosure level(0x%04x), connector name( %s)\n",
 			ioc->name, pcie_device->enclosure_level,
 			pcie_device->connector_name);
 
@@ -2632,6 +2632,7 @@ mpt3sas_scsih_clear_tm_flag(struct MPT3SAS_ADAPTER *ioc, u16 handle)
  * @smid_task: smid assigned to the task
  * @msix_task: MSIX table index supplied by the OS
  * @timeout: timeout in seconds
+ * @tr_method: Target Reset Method
  * Context: user
  *
  * A generic API for sending task management requests to firmware.
@@ -2642,8 +2643,8 @@ mpt3sas_scsih_clear_tm_flag(struct MPT3SAS_ADAPTER *ioc, u16 handle)
  * Return SUCCESS or FAILED.
  */
 int
-mpt3sas_scsih_issue_tm(struct MPT3SAS_ADAPTER *ioc, u16 handle,
-	u64 lun, u8 type, u16 smid_task, u16 msix_task, ulong timeout)
+mpt3sas_scsih_issue_tm(struct MPT3SAS_ADAPTER *ioc, u16 handle, u64 lun,
+	u8 type, u16 smid_task, u16 msix_task, u8 timeout, u8 tr_method)
 {
 	Mpi2SCSITaskManagementRequest_t *mpi_request;
 	Mpi2SCSITaskManagementReply_t *mpi_reply;
@@ -2689,8 +2690,8 @@ mpt3sas_scsih_issue_tm(struct MPT3SAS_ADAPTER *ioc, u16 handle,
 	}
 
 	dtmprintk(ioc, pr_info(MPT3SAS_FMT
-		"sending tm: handle(0x%04x), task_type(0x%02x), smid(%d)\n",
-		ioc->name, handle, type, smid_task));
+		"sending tm: handle(0x%04x), task_type(0x%02x), smid(%d), timeout(%d), tr_method(0x%x)\n",
+		ioc->name, handle, type, smid_task, timeout, tr_method));
 	ioc->tm_cmds.status = MPT3_CMD_PENDING;
 	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
 	ioc->tm_cmds.smid = smid;
@@ -2699,6 +2700,7 @@ mpt3sas_scsih_issue_tm(struct MPT3SAS_ADAPTER *ioc, u16 handle,
 	mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
 	mpi_request->DevHandle = cpu_to_le16(handle);
 	mpi_request->TaskType = type;
+	mpi_request->MsgFlags = tr_method;
 	mpi_request->TaskMID = cpu_to_le16(smid_task);
 	int_to_scsilun(lun, (struct scsi_lun *)mpi_request->LUN);
 	mpt3sas_scsih_set_tm_flag(ioc, handle);
@@ -2745,13 +2747,14 @@ out:
 }
 
 int mpt3sas_scsih_issue_locked_tm(struct MPT3SAS_ADAPTER *ioc, u16 handle,
-	u64 lun, u8 type, u16 smid_task, u16 msix_task, ulong timeout)
+		u64 lun, u8 type, u16 smid_task, u16 msix_task,
+		u8 timeout, u8 tr_method)
 {
 	int ret;
 
 	mutex_lock(&ioc->tm_cmds.mutex);
 	ret = mpt3sas_scsih_issue_tm(ioc, handle, lun, type, smid_task,
-			msix_task, timeout);
+			msix_task, timeout, tr_method);
 	mutex_unlock(&ioc->tm_cmds.mutex);
 
 	return ret;
@@ -2854,6 +2857,8 @@ scsih_abort(struct scsi_cmnd *scmd)
 	u16 handle;
 	int r;
 
+	u8 timeout = 30;
+	struct _pcie_device *pcie_device = NULL;
 	sdev_printk(KERN_INFO, scmd->device,
 		"attempting task abort! scmd(%p)\n", scmd);
 	_scsih_tm_display_info(ioc, scmd);
@@ -2887,15 +2892,20 @@ scsih_abort(struct scsi_cmnd *scmd)
 	mpt3sas_halt_firmware(ioc);
 
 	handle = sas_device_priv_data->sas_target->handle;
+	pcie_device = mpt3sas_get_pdev_by_handle(ioc, handle);
+	if (pcie_device && (!ioc->tm_custom_handling))
+		timeout = ioc->nvme_abort_timeout;
 	r = mpt3sas_scsih_issue_locked_tm(ioc, handle, scmd->device->lun,
 		MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK,
-		st->smid, st->msix_io, 30);
+		st->smid, st->msix_io, timeout, 0);
 	/* Command must be cleared after abort */
 	if (r == SUCCESS && st->cb_idx != 0xFF)
 		r = FAILED;
  out:
 	sdev_printk(KERN_INFO, scmd->device, "task abort: %s scmd(%p)\n",
 	    ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
+	if (pcie_device)
+		pcie_device_put(pcie_device);
 	return r;
 }
 
@@ -2911,7 +2921,10 @@ scsih_dev_reset(struct scsi_cmnd *scmd)
 	struct MPT3SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
 	struct MPT3SAS_DEVICE *sas_device_priv_data;
 	struct _sas_device *sas_device = NULL;
+	struct _pcie_device *pcie_device = NULL;
 	u16	handle;
+	u8	tr_method = 0;
+	u8	tr_timeout = 30;
 	int r;
 
 	struct scsi_target *starget = scmd->device->sdev_target;
@@ -2948,8 +2961,16 @@ scsih_dev_reset(struct scsi_cmnd *scmd)
 		goto out;
 	}
 
+	pcie_device = mpt3sas_get_pdev_by_handle(ioc, handle);
+
+	if (pcie_device && (!ioc->tm_custom_handling)) {
+		tr_timeout = pcie_device->reset_timeout;
+		tr_method = MPI26_SCSITASKMGMT_MSGFLAGS_PROTOCOL_LVL_RST_PCIE;
+	} else
+		tr_method = MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET;
 	r = mpt3sas_scsih_issue_locked_tm(ioc, handle, scmd->device->lun,
-		MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET, 0, 0, 30);
+		MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET, 0, 0,
+		tr_timeout, tr_method);
 	/* Check for busy commands after reset */
 	if (r == SUCCESS && atomic_read(&scmd->device->device_busy))
 		r = FAILED;
@@ -2959,6 +2980,8 @@ scsih_dev_reset(struct scsi_cmnd *scmd)
 
 	if (sas_device)
 		sas_device_put(sas_device);
+	if (pcie_device)
+		pcie_device_put(pcie_device);
 
 	return r;
 }
@@ -2975,7 +2998,10 @@ scsih_target_reset(struct scsi_cmnd *scmd)
 	struct MPT3SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
 	struct MPT3SAS_DEVICE *sas_device_priv_data;
 	struct _sas_device *sas_device = NULL;
+	struct _pcie_device *pcie_device = NULL;
 	u16	handle;
+	u8	tr_method = 0;
+	u8	tr_timeout = 30;
 	int r;
 	struct scsi_target *starget = scmd->device->sdev_target;
 	struct MPT3SAS_TARGET *target_priv_data = starget->hostdata;
@@ -3011,8 +3037,16 @@ scsih_target_reset(struct scsi_cmnd *scmd)
 		goto out;
 	}
 
+	pcie_device = mpt3sas_get_pdev_by_handle(ioc, handle);
+
+	if (pcie_device && (!ioc->tm_custom_handling)) {
+		tr_timeout = pcie_device->reset_timeout;
+		tr_method = MPI26_SCSITASKMGMT_MSGFLAGS_PROTOCOL_LVL_RST_PCIE;
+	} else
+		tr_method = MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET;
 	r = mpt3sas_scsih_issue_locked_tm(ioc, handle, 0,
-		MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0, 0, 30);
+		MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0, 0,
+	    tr_timeout, tr_method);
 	/* Check for busy commands after reset */
 	if (r == SUCCESS && atomic_read(&starget->target_busy))
 		r = FAILED;
@@ -3022,7 +3056,8 @@ scsih_target_reset(struct scsi_cmnd *scmd)
 
 	if (sas_device)
 		sas_device_put(sas_device);
-
+	if (pcie_device)
+		pcie_device_put(pcie_device);
 	return r;
 }
 
@@ -3556,6 +3591,7 @@ _scsih_tm_tr_send(struct MPT3SAS_ADAPTER *ioc, u16 handle)
 	unsigned long flags;
 	struct _tr_list *delayed_tr;
 	u32 ioc_state;
+	u8 tr_method = 0;
 
 	if (ioc->pci_error_recovery) {
 		dewtprintk(ioc, pr_info(MPT3SAS_FMT
@@ -3598,6 +3634,11 @@ _scsih_tm_tr_send(struct MPT3SAS_ADAPTER *ioc, u16 handle)
 			sas_address = pcie_device->wwid;
 		}
 		spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+		if (pcie_device && (!ioc->tm_custom_handling))
+			tr_method =
+			    MPI26_SCSITASKMGMT_MSGFLAGS_PROTOCOL_LVL_RST_PCIE;
+		else
+			tr_method = MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET;
 	}
 	if (sas_target_priv_data) {
 		dewtprintk(ioc, pr_info(MPT3SAS_FMT
@@ -3661,6 +3702,7 @@ _scsih_tm_tr_send(struct MPT3SAS_ADAPTER *ioc, u16 handle)
 	mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
 	mpi_request->DevHandle = cpu_to_le16(handle);
 	mpi_request->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET;
+	mpi_request->MsgFlags = tr_method;
 	set_bit(handle, ioc->device_remove_in_progress);
 	mpt3sas_base_put_smid_hi_priority(ioc, smid, 0);
 	mpt3sas_trigger_master(ioc, MASTER_TRIGGER_DEVICE_REMOVAL);
@@ -6942,6 +6984,11 @@ _scsih_pcie_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle)
 	}
 	pcie_device->nvme_mdts =
 		le32_to_cpu(pcie_device_pg2.MaximumDataTransferSize);
+	if (pcie_device_pg2.ControllerResetTO)
+		pcie_device->reset_timeout =
+			pcie_device_pg2.ControllerResetTO;
+	else
+		pcie_device->reset_timeout = 30;
 
 	if (ioc->wait_for_discovery_to_complete)
 		_scsih_pcie_device_init_add(ioc, pcie_device);
@@ -7194,6 +7241,9 @@ _scsih_pcie_device_status_change_event_debug(struct MPT3SAS_ADAPTER *ioc,
 	case MPI26_EVENT_PCIDEV_STAT_RC_ASYNC_NOTIFICATION:
 		reason_str = "internal async notification";
 		break;
+	case MPI26_EVENT_PCIDEV_STAT_RC_PCIE_HOT_RESET_FAILED:
+		reason_str = "pcie hot reset failed";
+		break;
 	default:
 		reason_str = "unknown reason";
 		break;
@@ -7449,7 +7499,7 @@ _scsih_sas_broadcast_primitive_event(struct MPT3SAS_ADAPTER *ioc,
 		spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
 		r = mpt3sas_scsih_issue_tm(ioc, handle, lun,
 			MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK, st->smid,
-			st->msix_io, 30);
+			st->msix_io, 30, 0);
 		if (r == FAILED) {
 			sdev_printk(KERN_WARNING, sdev,
 			    "mpt3sas_scsih_issue_tm: FAILED when sending "
@@ -7490,7 +7540,7 @@ _scsih_sas_broadcast_primitive_event(struct MPT3SAS_ADAPTER *ioc,
 
 		r = mpt3sas_scsih_issue_tm(ioc, handle, sdev->lun,
 			MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK, st->smid,
-			st->msix_io, 30);
+			st->msix_io, 30, 0);
 		if (r == FAILED || st->cb_idx != 0xFF) {
 			sdev_printk(KERN_WARNING, sdev,
 			    "mpt3sas_scsih_issue_tm: ABORT_TASK: FAILED : "
-- 
1.8.3.1

  parent reply	other threads:[~2018-03-30  9:39 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-30  9:37 [PATCH 00/15] mpt3sas: Enhancements and Defect fixes Chaitra P B
2018-03-30  9:37 ` [PATCH 01/15] mpt3sas: Fixed warnings Chaitra P B
2018-03-30  9:37 ` [PATCH 02/15] mpt3sas: Pre-allocate RDPQ Array at driver boot time Chaitra P B
2018-03-30  9:37 ` [PATCH 03/15] mpt3sas: Add sanity checks for scsi tracker before accessing it Chaitra P B
2018-03-30 11:59   ` Christoph Hellwig
2018-04-02  6:23     ` Sreekanth Reddy
2018-04-02 15:25       ` Bart Van Assche
2018-04-03  4:41         ` Sreekanth Reddy
2018-04-03 15:56           ` Bart Van Assche
2018-04-04 12:28             ` Sreekanth Reddy
2018-03-30 15:54   ` Bart Van Assche
2018-03-30  9:37 ` [PATCH 04/15] mpt3sas: Lockless access for chain buffers Chaitra P B
2018-03-30  9:37 ` [PATCH 05/15] mpt3sas: Optimize I/O memory consumption in driver Chaitra P B
2018-03-30  9:37 ` [PATCH 06/15] mpt3sas: Enhanced handling of Sense Buffer Chaitra P B
2018-03-30  9:37 ` [PATCH 07/15] mpt3sas: Added support for SAS Device Discovery Error Event Chaitra P B
2018-03-30  9:37 ` [PATCH 08/15] mpt3sas: Increase event log buffer to support 24 port HBA's Chaitra P B
2018-03-30  9:37 ` [PATCH 09/15] mpt3sas: Allow processing of events during driver unload Chaitra P B
2018-03-30  9:37 ` [PATCH 10/15] mpt3sas: Cache enclosure pages during enclosure add Chaitra P B
2018-03-30  9:37 ` [PATCH 11/15] mpt3sas: Report Firmware Package Version from HBA Driver Chaitra P B
2018-03-31  8:44   ` kbuild test robot
2018-03-30  9:37 ` [PATCH 12/15] mpt3sas: Update MPI Headers Chaitra P B
2018-03-30  9:37 ` Chaitra P B [this message]
2018-03-30  9:37 ` [PATCH 14/15] mpt3sas: fix possible memory leak Chaitra P B
2018-03-30  9:37 ` [PATCH 15/15] mpt3sas: Update driver version "25.100.00.00" Chaitra P B
2018-03-30  9:58 ` [PATCH 00/15] mpt3sas: Enhancements and Defect fixes Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1522402644-3016-14-git-send-email-chaitra.basappa@broadcom.com \
    --to=chaitra.basappa@broadcom.com \
    --cc=Sathya.Prakash@broadcom.com \
    --cc=linux-scsi@vger.kernel.org \
    --cc=sreekanth.reddy@broadcom.com \
    --cc=stable@vger.kernel.org \
    --cc=suganath-prabu.subramani@broadcom.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox