Patch "parport_pc: Add support for WCH CH382L PCI-E single parallel port card." has been added to the 4.14-stable tree

[<gregkh@linuxfoundation.org>]

This is a note to let you know that I've just added the patch titled

    parport_pc: Add support for WCH CH382L PCI-E single parallel port card.

to the 4.14-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     parport_pc-add-support-for-wch-ch382l-pci-e-single-parallel-port-card.patch
and it can be found in the queue-4.14 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From 823f7923833c6cc2b16e601546d607dcfb368004 Mon Sep 17 00:00:00 2001
From: Alexander Gerasiov <gq@redlab-i.ru>
Date: Sun, 4 Feb 2018 02:50:22 +0300
Subject: parport_pc: Add support for WCH CH382L PCI-E single parallel port card.

From: Alexander Gerasiov <gq@redlab-i.ru>

commit 823f7923833c6cc2b16e601546d607dcfb368004 upstream.

WCH CH382L is a PCI-E adapter with 1 parallel port. It is similair to CH382
but serial ports are not soldered on board. Detected as
Serial controller: Device 1c00:3050 (rev 10) (prog-if 05 [16850])

Signed-off-by: Alexander Gerasiov <gq@redlab-i.ru>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/parport/parport_pc.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -2646,6 +2646,7 @@ enum parport_pc_pci_cards {
 	netmos_9901,
 	netmos_9865,
 	quatech_sppxp100,
+	wch_ch382l,
 };
 
 
@@ -2708,6 +2709,7 @@ static struct parport_pc_pci {
 	/* netmos_9901 */               { 1, { { 0, -1 }, } },
 	/* netmos_9865 */               { 1, { { 0, -1 }, } },
 	/* quatech_sppxp100 */		{ 1, { { 0, 1 }, } },
+	/* wch_ch382l */		{ 1, { { 2, -1 }, } },
 };
 
 static const struct pci_device_id parport_pc_pci_tbl[] = {
@@ -2797,6 +2799,8 @@ static const struct pci_device_id parpor
 	/* Quatech SPPXP-100 Parallel port PCI ExpressCard */
 	{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SPPXP_100,
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, quatech_sppxp100 },
+	/* WCH CH382L PCI-E single parallel port card */
+	{ 0x1c00, 0x3050, 0x1c00, 0x3050, 0, 0, wch_ch382l },
 	{ 0, } /* terminate list */
 };
 MODULE_DEVICE_TABLE(pci, parport_pc_pci_tbl);


Patches currently in stable-queue which might be from gq@redlab-i.ru are

queue-4.14/parport_pc-add-support-for-wch-ch382l-pci-e-single-parallel-port-card.patch