From: <gregkh@linuxfoundation.org>
To: mario_molitor@web.de, alexander.levin@microsoft.com,
davem@davemloft.net, gregkh@linuxfoundation.org
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "stmmac: fix ptp header for GMAC3 hw timestamp" has been added to the 4.9-stable tree
Date: Mon, 09 Apr 2018 21:59:54 +0200 [thread overview]
Message-ID: <15233039942557@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
stmmac: fix ptp header for GMAC3 hw timestamp
to the 4.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
stmmac-fix-ptp-header-for-gmac3-hw-timestamp.patch
and it can be found in the queue-4.9 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From foo@baz Mon Apr 9 17:09:24 CEST 2018
From: Mario Molitor <mario_molitor@web.de>
Date: Thu, 8 Jun 2017 22:41:02 +0200
Subject: stmmac: fix ptp header for GMAC3 hw timestamp
From: Mario Molitor <mario_molitor@web.de>
[ Upstream commit fd6720aefde06eacf17404eed2cad65c6ec103e1 ]
According the CYCLON V documention only the bit 16 of snaptypesel should
set.
(more information see Table 17-20 (cv_5v4.pdf) :
Timestamp Snapshot Dependency on Register Bits)
Fixes: d2042052a0aa ("stmmac: update the PTP header file")
Signed-off-by: Mario Molitor <mario_molitor@web.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 15 ++++++++++++---
drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.h | 3 ++-
2 files changed, 14 insertions(+), 4 deletions(-)
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -478,7 +478,10 @@ static int stmmac_hwtstamp_ioctl(struct
/* PTP v1, UDP, any kind of event packet */
config.rx_filter = HWTSTAMP_FILTER_PTP_V1_L4_EVENT;
/* take time stamp for all event messages */
- snap_type_sel = PTP_TCR_SNAPTYPSEL_1;
+ if (priv->plat->has_gmac4)
+ snap_type_sel = PTP_GMAC4_TCR_SNAPTYPSEL_1;
+ else
+ snap_type_sel = PTP_TCR_SNAPTYPSEL_1;
ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA;
ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA;
@@ -510,7 +513,10 @@ static int stmmac_hwtstamp_ioctl(struct
config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L4_EVENT;
ptp_v2 = PTP_TCR_TSVER2ENA;
/* take time stamp for all event messages */
- snap_type_sel = PTP_TCR_SNAPTYPSEL_1;
+ if (priv->plat->has_gmac4)
+ snap_type_sel = PTP_GMAC4_TCR_SNAPTYPSEL_1;
+ else
+ snap_type_sel = PTP_TCR_SNAPTYPSEL_1;
ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA;
ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA;
@@ -544,7 +550,10 @@ static int stmmac_hwtstamp_ioctl(struct
config.rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT;
ptp_v2 = PTP_TCR_TSVER2ENA;
/* take time stamp for all event messages */
- snap_type_sel = PTP_TCR_SNAPTYPSEL_1;
+ if (priv->plat->has_gmac4)
+ snap_type_sel = PTP_GMAC4_TCR_SNAPTYPSEL_1;
+ else
+ snap_type_sel = PTP_TCR_SNAPTYPSEL_1;
ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA;
ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA;
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.h
@@ -63,7 +63,8 @@
/* Enable Snapshot for Messages Relevant to Master */
#define PTP_TCR_TSMSTRENA BIT(15)
/* Select PTP packets for Taking Snapshots */
-#define PTP_TCR_SNAPTYPSEL_1 GENMASK(17, 16)
+#define PTP_TCR_SNAPTYPSEL_1 BIT(16)
+#define PTP_GMAC4_TCR_SNAPTYPSEL_1 GENMASK(17, 16)
/* Enable MAC address for PTP Frame Filtering */
#define PTP_TCR_TSENMACADDR BIT(18)
Patches currently in stable-queue which might be from mario_molitor@web.de are
queue-4.9/stmmac-fix-ptp-header-for-gmac3-hw-timestamp.patch
reply other threads:[~2018-04-09 20:08 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=15233039942557@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=alexander.levin@microsoft.com \
--cc=davem@davemloft.net \
--cc=mario_molitor@web.de \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).