Patch "watchdog: f71808e_wdt: Add F71868 support" has been added to the 4.9-stable tree

[<gregkh@linuxfoundation.org>]

This is a note to let you know that I've just added the patch titled

    watchdog: f71808e_wdt: Add F71868 support

to the 4.9-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     watchdog-f71808e_wdt-add-f71868-support.patch
and it can be found in the queue-4.9 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From foo@baz Mon Apr  9 17:09:24 CEST 2018
From: "Maciej S. Szmigiero" <mail@maciej.szmigiero.name>
Date: Mon, 17 Apr 2017 22:37:05 +0200
Subject: watchdog: f71808e_wdt: Add F71868 support

From: "Maciej S. Szmigiero" <mail@maciej.szmigiero.name>


[ Upstream commit 166fbcf88fdafa02f784ec25ac64745c716b2de0 ]

This adds support for watchdog part of Fintek F71868 Super I/O chip to
f71808e_wdt driver.

The F71868 chip is, in general, very similar to a F71869, however it has
slightly different set of available reset pulse widths.

Tested on MSI A55M-P33 motherboard.

Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/watchdog/Kconfig       |    7 ++++---
 drivers/watchdog/f71808e_wdt.c |   27 ++++++++++++++++++++-------
 2 files changed, 24 insertions(+), 10 deletions(-)

--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -799,11 +799,12 @@ config EBC_C384_WDT
 	  the timeout module parameter.
 
 config F71808E_WDT
-	tristate "Fintek F71808E, F71862FG, F71869, F71882FG and F71889FG Watchdog"
+	tristate "Fintek F718xx, F818xx Super I/O Watchdog"
 	depends on X86
 	help
-	  This is the driver for the hardware watchdog on the Fintek
-	  F71808E, F71862FG, F71869, F71882FG and F71889FG Super I/O controllers.
+	  This is the driver for the hardware watchdog on the Fintek F71808E,
+	  F71862FG, F71868, F71869, F71882FG, F71889FG, F81865 and F81866
+	  Super I/O controllers.
 
 	  You can compile this driver directly into the kernel, or use
 	  it as a module.  The module will be called f71808e_wdt.
--- a/drivers/watchdog/f71808e_wdt.c
+++ b/drivers/watchdog/f71808e_wdt.c
@@ -57,6 +57,7 @@
 #define SIO_F71808_ID		0x0901	/* Chipset ID */
 #define SIO_F71858_ID		0x0507	/* Chipset ID */
 #define SIO_F71862_ID		0x0601	/* Chipset ID */
+#define SIO_F71868_ID		0x1106	/* Chipset ID */
 #define SIO_F71869_ID		0x0814	/* Chipset ID */
 #define SIO_F71869A_ID		0x1007	/* Chipset ID */
 #define SIO_F71882_ID		0x0541	/* Chipset ID */
@@ -101,7 +102,7 @@ MODULE_PARM_DESC(timeout,
 static unsigned int pulse_width = WATCHDOG_PULSE_WIDTH;
 module_param(pulse_width, uint, 0);
 MODULE_PARM_DESC(pulse_width,
-	"Watchdog signal pulse width. 0(=level), 1 ms, 25 ms, 125 ms or 5000 ms"
+	"Watchdog signal pulse width. 0(=level), 1, 25, 30, 125, 150, 5000 or 6000 ms"
 			" (default=" __MODULE_STRING(WATCHDOG_PULSE_WIDTH) ")");
 
 static unsigned int f71862fg_pin = WATCHDOG_F71862FG_PIN;
@@ -119,13 +120,14 @@ module_param(start_withtimeout, uint, 0)
 MODULE_PARM_DESC(start_withtimeout, "Start watchdog timer on module load with"
 	" given initial timeout. Zero (default) disables this feature.");
 
-enum chips { f71808fg, f71858fg, f71862fg, f71869, f71882fg, f71889fg, f81865,
-	     f81866};
+enum chips { f71808fg, f71858fg, f71862fg, f71868, f71869, f71882fg, f71889fg,
+	     f81865, f81866};
 
 static const char *f71808e_names[] = {
 	"f71808fg",
 	"f71858fg",
 	"f71862fg",
+	"f71868",
 	"f71869",
 	"f71882fg",
 	"f71889fg",
@@ -252,16 +254,23 @@ static int watchdog_set_timeout(int time
 static int watchdog_set_pulse_width(unsigned int pw)
 {
 	int err = 0;
+	unsigned int t1 = 25, t2 = 125, t3 = 5000;
+
+	if (watchdog.type == f71868) {
+		t1 = 30;
+		t2 = 150;
+		t3 = 6000;
+	}
 
 	mutex_lock(&watchdog.lock);
 
-	if        (pw <=    1) {
+	if        (pw <=  1) {
 		watchdog.pulse_val = 0;
-	} else if (pw <=   25) {
+	} else if (pw <= t1) {
 		watchdog.pulse_val = 1;
-	} else if (pw <=  125) {
+	} else if (pw <= t2) {
 		watchdog.pulse_val = 2;
-	} else if (pw <= 5000) {
+	} else if (pw <= t3) {
 		watchdog.pulse_val = 3;
 	} else {
 		pr_err("pulse width out of range\n");
@@ -354,6 +363,7 @@ static int watchdog_start(void)
 			goto exit_superio;
 		break;
 
+	case f71868:
 	case f71869:
 		/* GPIO14 --> WDTRST# */
 		superio_clear_bit(watchdog.sioaddr, SIO_REG_MFUNCT1, 4);
@@ -792,6 +802,9 @@ static int __init f71808e_find(int sioad
 		watchdog.type = f71862fg;
 		err = f71862fg_pin_configure(0); /* validate module parameter */
 		break;
+	case SIO_F71868_ID:
+		watchdog.type = f71868;
+		break;
 	case SIO_F71869_ID:
 	case SIO_F71869A_ID:
 		watchdog.type = f71869;


Patches currently in stable-queue which might be from mail@maciej.szmigiero.name are

queue-4.9/watchdog-f71808e_wdt-add-f71868-support.patch