patch "usbip: vhci_hcd: check rhport before using in vhci_hub_control()" added to usb-linus

[<gregkh@linuxfoundation.org>]

This is a note to let you know that I've just added the patch titled

    usbip: vhci_hcd: check rhport before using in vhci_hub_control()

to my usb git tree which can be found at
    git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-linus branch.

The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)

The patch will hopefully also be merged in Linus's tree for the
next -rc kernel release.

If you have any questions about this process, please let me know.


>From 5b22f676118ff25049382041da0db8012e57c9e8 Mon Sep 17 00:00:00 2001
From: Shuah Khan <shuahkh@osg.samsung.com>
Date: Thu, 5 Apr 2018 16:31:49 -0600
Subject: usbip: vhci_hcd: check rhport before using in vhci_hub_control()

Validate !rhport < 0 before using it to access port_status array.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/usbip/vhci_hcd.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c
index 20e3d4609583..d11f3f8dad40 100644
--- a/drivers/usb/usbip/vhci_hcd.c
+++ b/drivers/usb/usbip/vhci_hcd.c
@@ -354,6 +354,8 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		usbip_dbg_vhci_rh(" ClearHubFeature\n");
 		break;
 	case ClearPortFeature:
+		if (rhport < 0)
+			goto error;
 		switch (wValue) {
 		case USB_PORT_FEAT_SUSPEND:
 			if (hcd->speed == HCD_USB3) {
@@ -511,11 +513,16 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 				goto error;
 			}
 
+			if (rhport < 0)
+				goto error;
+
 			vhci_hcd->port_status[rhport] |= USB_PORT_STAT_SUSPEND;
 			break;
 		case USB_PORT_FEAT_POWER:
 			usbip_dbg_vhci_rh(
 				" SetPortFeature: USB_PORT_FEAT_POWER\n");
+			if (rhport < 0)
+				goto error;
 			if (hcd->speed == HCD_USB3)
 				vhci_hcd->port_status[rhport] |= USB_SS_PORT_STAT_POWER;
 			else
@@ -524,6 +531,8 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		case USB_PORT_FEAT_BH_PORT_RESET:
 			usbip_dbg_vhci_rh(
 				" SetPortFeature: USB_PORT_FEAT_BH_PORT_RESET\n");
+			if (rhport < 0)
+				goto error;
 			/* Applicable only for USB3.0 hub */
 			if (hcd->speed != HCD_USB3) {
 				pr_err("USB_PORT_FEAT_BH_PORT_RESET req not "
@@ -534,6 +543,8 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		case USB_PORT_FEAT_RESET:
 			usbip_dbg_vhci_rh(
 				" SetPortFeature: USB_PORT_FEAT_RESET\n");
+			if (rhport < 0)
+				goto error;
 			/* if it's already enabled, disable */
 			if (hcd->speed == HCD_USB3) {
 				vhci_hcd->port_status[rhport] = 0;
@@ -554,6 +565,8 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		default:
 			usbip_dbg_vhci_rh(" SetPortFeature: default %d\n",
 					  wValue);
+			if (rhport < 0)
+				goto error;
 			if (hcd->speed == HCD_USB3) {
 				if ((vhci_hcd->port_status[rhport] &
 				     USB_SS_PORT_STAT_POWER) != 0) {
-- 
2.17.0