From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail.linuxfoundation.org ([140.211.169.12]:42418 "EHLO mail.linuxfoundation.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751053AbeDVMpm (ORCPT ); Sun, 22 Apr 2018 08:45:42 -0400 Subject: patch "usbip: vhci_hcd: check rhport before using in vhci_hub_control()" added to usb-linus To: shuahkh@osg.samsung.com, gregkh@linuxfoundation.org, stable@vger.kernel.org From: Date: Sun, 22 Apr 2018 14:45:28 +0200 Message-ID: <152440112814764@kroah.com> MIME-Version: 1.0 Content-Type: text/plain; charset=ANSI_X3.4-1968 Content-Transfer-Encoding: 8bit Sender: stable-owner@vger.kernel.org List-ID: This is a note to let you know that I've just added the patch titled usbip: vhci_hcd: check rhport before using in vhci_hub_control() to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >>From 5b22f676118ff25049382041da0db8012e57c9e8 Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Thu, 5 Apr 2018 16:31:49 -0600 Subject: usbip: vhci_hcd: check rhport before using in vhci_hub_control() Validate !rhport < 0 before using it to access port_status array. Signed-off-by: Shuah Khan Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/usbip/vhci_hcd.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c index 20e3d4609583..d11f3f8dad40 100644 --- a/drivers/usb/usbip/vhci_hcd.c +++ b/drivers/usb/usbip/vhci_hcd.c @@ -354,6 +354,8 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, usbip_dbg_vhci_rh(" ClearHubFeature\n"); break; case ClearPortFeature: + if (rhport < 0) + goto error; switch (wValue) { case USB_PORT_FEAT_SUSPEND: if (hcd->speed == HCD_USB3) { @@ -511,11 +513,16 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, goto error; } + if (rhport < 0) + goto error; + vhci_hcd->port_status[rhport] |= USB_PORT_STAT_SUSPEND; break; case USB_PORT_FEAT_POWER: usbip_dbg_vhci_rh( " SetPortFeature: USB_PORT_FEAT_POWER\n"); + if (rhport < 0) + goto error; if (hcd->speed == HCD_USB3) vhci_hcd->port_status[rhport] |= USB_SS_PORT_STAT_POWER; else @@ -524,6 +531,8 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, case USB_PORT_FEAT_BH_PORT_RESET: usbip_dbg_vhci_rh( " SetPortFeature: USB_PORT_FEAT_BH_PORT_RESET\n"); + if (rhport < 0) + goto error; /* Applicable only for USB3.0 hub */ if (hcd->speed != HCD_USB3) { pr_err("USB_PORT_FEAT_BH_PORT_RESET req not " @@ -534,6 +543,8 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, case USB_PORT_FEAT_RESET: usbip_dbg_vhci_rh( " SetPortFeature: USB_PORT_FEAT_RESET\n"); + if (rhport < 0) + goto error; /* if it's already enabled, disable */ if (hcd->speed == HCD_USB3) { vhci_hcd->port_status[rhport] = 0; @@ -554,6 +565,8 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, default: usbip_dbg_vhci_rh(" SetPortFeature: default %d\n", wValue); + if (rhport < 0) + goto error; if (hcd->speed == HCD_USB3) { if ((vhci_hcd->port_status[rhport] & USB_SS_PORT_STAT_POWER) != 0) { -- 2.17.0