FAILED: patch "[PATCH] can: flexcan: handle tx-complete CAN frames via rx-offload" failed to apply to 4.14-stable tree

FAILED: patch "[PATCH] can: flexcan: handle tx-complete CAN frames via rx-offload" failed to apply to 4.14-stable tree

[gregkh]

The patch below does not apply to the 4.14-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

>From ed72bc8bcb9277061e753faf300b20f97323761c Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <o.rempel@pengutronix.de>
Date: Tue, 18 Sep 2018 11:40:39 +0200
Subject: [PATCH] can: flexcan: handle tx-complete CAN frames via rx-offload
 infrastructure

Current flexcan driver will put TX-ECHO in regular unsorted way, in
this case TX-ECHO can come after the response to the same TXed message.
In some cases, for example for J1939 stack, things will break.
This patch is using new rx-offload API to put the messages just in the
right place.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index 68b46395c580..41a175f80c4b 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -787,8 +787,11 @@ static irqreturn_t flexcan_irq(int irq, void *dev_id)
 
 	/* transmission complete interrupt */
 	if (reg_iflag2 & FLEXCAN_IFLAG_MB(FLEXCAN_TX_MB)) {
+		u32 reg_ctrl = priv->read(&regs->mb[FLEXCAN_TX_MB].can_ctrl);
+
 		handled = IRQ_HANDLED;
-		stats->tx_bytes += can_get_echo_skb(dev, 0);
+		stats->tx_bytes += can_rx_offload_get_echo_skb(&priv->offload,
+							       0, reg_ctrl << 16);
 		stats->tx_packets++;
 		can_led_event(dev, CAN_LED_EVENT_TX);