From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from out1-smtp.messagingengine.com ([66.111.4.25]:58311 "EHLO out1-smtp.messagingengine.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1727575AbeLFIgg (ORCPT ); Thu, 6 Dec 2018 03:36:36 -0500 Subject: FAILED: patch "[PATCH] arm64: dts: rockchip: remove vdd_log from rock960 to fix a" failed to apply to 4.19-stable tree To: daniel.lezcano@linaro.org, heiko@sntech.de, manivannan.sadhasivam@linaro.org Cc: From: Date: Thu, 06 Dec 2018 09:36:33 +0100 Message-ID: <1544085393248218@kroah.com> MIME-Version: 1.0 Content-Type: text/plain; charset=ANSI_X3.4-1968 Content-Transfer-Encoding: 8bit Sender: stable-owner@vger.kernel.org List-ID: The patch below does not apply to the 4.19-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to . thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >>From 13682e524167cbd7e2a26c5e91bec765f0f96273 Mon Sep 17 00:00:00 2001 From: Daniel Lezcano Date: Wed, 17 Oct 2018 11:18:30 +0200 Subject: [PATCH] arm64: dts: rockchip: remove vdd_log from rock960 to fix a stability issues When the performance governor is set as default, the rock960 hangs around one minute after booting, whatever the activity is (idle, key pressed, loaded, ...). Based on the commit log found at https://patchwork.kernel.org/patch/10092377/ "vdd_log has no consumer and therefore will not be set to a specific voltage. Still the PWM output pin gets configured and thence the vdd_log output voltage will changed from it's default. Depending on the idle state of the PWM this will slightly over or undervoltage the logic supply of the RK3399 and cause instability with GbE (undervoltage) and PCIe (overvoltage). Since the default value set by a voltage divider is the correct supply voltage and we don't need to change it during runtime we remove the rail from the devicetree completely so the PWM pin will not be configured." After removing the vdd-log from the rock960's specific DT, the board does no longer hang and shows a stable behavior. Apply the same change for the rock960 by removing the vdd-log from the DT. Fixes: 874846f1fccd ("arm64: dts: rockchip: add 96boards RK3399 Ficus board") Cc: stable@vger.kernel.org Tested-by: Manivannan Sadhasivam Signed-off-by: Daniel Lezcano Signed-off-by: Heiko Stuebner diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi index 6c8c4ab044aa..56abbb08c133 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi @@ -57,18 +57,6 @@ regulator-always-on; vin-supply = <&vcc_sys>; }; - - vdd_log: vdd-log { - compatible = "pwm-regulator"; - pwms = <&pwm2 0 25000 0>; - regulator-name = "vdd_log"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc_sys>; - }; - }; &cpu_l0 {