* FAILED: patch "[PATCH] serial: uartps: Fix stuck ISR if RX disabled with non-empty" failed to apply to 4.4-stable tree
@ 2019-03-21 6:57 gregkh
0 siblings, 0 replies; only message in thread
From: gregkh @ 2019-03-21 6:57 UTC (permalink / raw)
To: anssi.hannula, gregkh; +Cc: stable
The patch below does not apply to the 4.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 7abab1605139bc41442864c18f9573440f7ca105 Mon Sep 17 00:00:00 2001
From: Anssi Hannula <anssi.hannula@bitwise.fi>
Date: Fri, 15 Feb 2019 18:45:08 +0200
Subject: [PATCH] serial: uartps: Fix stuck ISR if RX disabled with non-empty
FIFO
If RX is disabled while there are still unprocessed bytes in RX FIFO,
cdns_uart_handle_rx() called from interrupt handler will get stuck in
the receive loop as read bytes will not get removed from the RX FIFO
and CDNS_UART_SR_RXEMPTY bit will never get set.
Avoid the stuck handler by checking first if RX is disabled. port->lock
protects against race with RX-disabling functions.
This HW behavior was mentioned by Nathan Rossi in 43e98facc4a3 ("tty:
xuartps: Fix RX hang, and TX corruption in termios call") which fixed a
similar issue in cdns_uart_set_termios().
The behavior can also be easily verified by e.g. setting
CDNS_UART_CR_RX_DIS at the beginning of cdns_uart_handle_rx() - the
following loop will then get stuck.
Resetting the FIFO using RXRST would not set RXEMPTY either so simply
issuing a reset after RX-disable would not work.
I observe this frequently on a ZynqMP board during heavy RX load at 1M
baudrate when the reader process exits and thus RX gets disabled.
Fixes: 61ec9016988f ("tty/serial: add support for Xilinx PS UART")
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 094f2958cb2b..ee9f18c52d29 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -364,7 +364,13 @@ static irqreturn_t cdns_uart_isr(int irq, void *dev_id)
cdns_uart_handle_tx(dev_id);
isrstatus &= ~CDNS_UART_IXR_TXEMPTY;
}
- if (isrstatus & CDNS_UART_IXR_RXMASK)
+
+ /*
+ * Skip RX processing if RX is disabled as RXEMPTY will never be set
+ * as read bytes will not be removed from the FIFO.
+ */
+ if (isrstatus & CDNS_UART_IXR_RXMASK &&
+ !(readl(port->membase + CDNS_UART_CR) & CDNS_UART_CR_RX_DIS))
cdns_uart_handle_rx(dev_id, isrstatus);
spin_unlock(&port->lock);
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2019-03-21 6:57 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-03-21 6:57 FAILED: patch "[PATCH] serial: uartps: Fix stuck ISR if RX disabled with non-empty" failed to apply to 4.4-stable tree gregkh
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).