From: <gregkh@linuxfoundation.org>
To: peter.chen@nxp.com, gregkh@linuxfoundation.org, stable@vger.kernel.org
Subject: patch "usb: chipidea: udc: don't do hardware access if gadget has stopped" added to usb-linus
Date: Wed, 21 Aug 2019 09:46:44 -0700 [thread overview]
Message-ID: <156640600412223@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
usb: chipidea: udc: don't do hardware access if gadget has stopped
to my usb git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-linus branch.
The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)
The patch will hopefully also be merged in Linus's tree for the
next -rc kernel release.
If you have any questions about this process, please let me know.
From cbe85c88ce80fb92956a0793518d415864dcead8 Mon Sep 17 00:00:00 2001
From: Peter Chen <peter.chen@nxp.com>
Date: Tue, 20 Aug 2019 02:07:58 +0000
Subject: usb: chipidea: udc: don't do hardware access if gadget has stopped
After _gadget_stop_activity is executed, we can consider the hardware
operation for gadget has finished, and the udc can be stopped and enter
low power mode. So, any later hardware operations (from usb_ep_ops APIs
or usb_gadget_ops APIs) should be considered invalid, any deinitializatons
has been covered at _gadget_stop_activity.
I meet this problem when I plug out usb cable from PC using mass_storage
gadget, my callstack like: vbus interrupt->.vbus_session->
composite_disconnect ->pm_runtime_put_sync(&_gadget->dev),
the composite_disconnect will call fsg_disable, but fsg_disable calls
usb_ep_disable using async way, there are register accesses for
usb_ep_disable. So sometimes, I get system hang due to visit register
without clock, sometimes not.
The Linux Kernel USB maintainer Alan Stern suggests this kinds of solution.
See: http://marc.info/?l=linux-usb&m=138541769810983&w=2.
Cc: <stable@vger.kernel.org> #v4.9+
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/20190820020503.27080-2-peter.chen@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/chipidea/udc.c | 32 ++++++++++++++++++++++++--------
1 file changed, 24 insertions(+), 8 deletions(-)
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 6a5ee8e6da10..67ad40b0a05b 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -709,12 +709,6 @@ static int _gadget_stop_activity(struct usb_gadget *gadget)
struct ci_hdrc *ci = container_of(gadget, struct ci_hdrc, gadget);
unsigned long flags;
- spin_lock_irqsave(&ci->lock, flags);
- ci->gadget.speed = USB_SPEED_UNKNOWN;
- ci->remote_wakeup = 0;
- ci->suspended = 0;
- spin_unlock_irqrestore(&ci->lock, flags);
-
/* flush all endpoints */
gadget_for_each_ep(ep, gadget) {
usb_ep_fifo_flush(ep);
@@ -732,6 +726,12 @@ static int _gadget_stop_activity(struct usb_gadget *gadget)
ci->status = NULL;
}
+ spin_lock_irqsave(&ci->lock, flags);
+ ci->gadget.speed = USB_SPEED_UNKNOWN;
+ ci->remote_wakeup = 0;
+ ci->suspended = 0;
+ spin_unlock_irqrestore(&ci->lock, flags);
+
return 0;
}
@@ -1303,6 +1303,10 @@ static int ep_disable(struct usb_ep *ep)
return -EBUSY;
spin_lock_irqsave(hwep->lock, flags);
+ if (hwep->ci->gadget.speed == USB_SPEED_UNKNOWN) {
+ spin_unlock_irqrestore(hwep->lock, flags);
+ return 0;
+ }
/* only internal SW should disable ctrl endpts */
@@ -1392,6 +1396,10 @@ static int ep_queue(struct usb_ep *ep, struct usb_request *req,
return -EINVAL;
spin_lock_irqsave(hwep->lock, flags);
+ if (hwep->ci->gadget.speed == USB_SPEED_UNKNOWN) {
+ spin_unlock_irqrestore(hwep->lock, flags);
+ return 0;
+ }
retval = _ep_queue(ep, req, gfp_flags);
spin_unlock_irqrestore(hwep->lock, flags);
return retval;
@@ -1415,8 +1423,8 @@ static int ep_dequeue(struct usb_ep *ep, struct usb_request *req)
return -EINVAL;
spin_lock_irqsave(hwep->lock, flags);
-
- hw_ep_flush(hwep->ci, hwep->num, hwep->dir);
+ if (hwep->ci->gadget.speed != USB_SPEED_UNKNOWN)
+ hw_ep_flush(hwep->ci, hwep->num, hwep->dir);
list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) {
dma_pool_free(hwep->td_pool, node->ptr, node->dma);
@@ -1487,6 +1495,10 @@ static void ep_fifo_flush(struct usb_ep *ep)
}
spin_lock_irqsave(hwep->lock, flags);
+ if (hwep->ci->gadget.speed == USB_SPEED_UNKNOWN) {
+ spin_unlock_irqrestore(hwep->lock, flags);
+ return;
+ }
hw_ep_flush(hwep->ci, hwep->num, hwep->dir);
@@ -1559,6 +1571,10 @@ static int ci_udc_wakeup(struct usb_gadget *_gadget)
int ret = 0;
spin_lock_irqsave(&ci->lock, flags);
+ if (ci->gadget.speed == USB_SPEED_UNKNOWN) {
+ spin_unlock_irqrestore(&ci->lock, flags);
+ return 0;
+ }
if (!ci->remote_wakeup) {
ret = -EOPNOTSUPP;
goto out;
--
2.23.0
reply other threads:[~2019-08-21 16:46 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=156640600412223@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=peter.chen@nxp.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).