stable.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: William.Kuzeja@stratus.com, gregkh@linuxfoundation.org,
	mathias.nyman@linux.intel.com, stable@vger.kernel.org,
	torez@redhat.com, william.kuzeja@stratus.com
Subject: patch "xhci: Prevent deadlock when xhci adapter breaks during init" added to usb-linus
Date: Fri, 04 Oct 2019 14:33:07 +0200	[thread overview]
Message-ID: <157019238714363@kroah.com> (raw)


This is a note to let you know that I've just added the patch titled

    xhci: Prevent deadlock when xhci adapter breaks during init

to my usb git tree which can be found at
    git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-linus branch.

The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)

The patch will hopefully also be merged in Linus's tree for the
next -rc kernel release.

If you have any questions about this process, please let me know.


From 8de66b0e6a56ff10dd00d2b0f2ae52e300178587 Mon Sep 17 00:00:00 2001
From: Bill Kuzeja <William.Kuzeja@stratus.com>
Date: Fri, 4 Oct 2019 14:59:31 +0300
Subject: xhci: Prevent deadlock when xhci adapter breaks during init

The system can hit a deadlock if an xhci adapter breaks while initializing.
The deadlock is between two threads: thread 1 is tearing down the
adapter and is stuck in usb_unlocked_disable_lpm waiting to lock the
hcd->handwidth_mutex. Thread 2 is holding this mutex (while still trying
to add a usb device), but is stuck in xhci_endpoint_reset waiting for a
stop or config command to complete. A reboot is required to resolve.

It turns out when calling xhci_queue_stop_endpoint and
xhci_queue_configure_endpoint in xhci_endpoint_reset, the return code is
not checked for errors. If the timing is right and the adapter dies just
before either of these commands get issued, we hang indefinitely waiting
for a completion on a command that didn't get issued.

This wasn't a problem before the following fix because we didn't send
commands in xhci_endpoint_reset:

commit f5249461b504 ("xhci: Clear the host side toggle manually when
    endpoint is soft reset")

With the patch I am submitting, a duration test which breaks adapters
during initialization (and which deadlocks with the standard kernel) runs
without issue.

Fixes: f5249461b504 ("xhci: Clear the host side toggle manually when endpoint is soft reset")
Cc: <stable@vger.kernel.org> # v4.17+
Cc: Torez Smith <torez@redhat.com>
Signed-off-by: Bill Kuzeja <william.kuzeja@stratus.com>
Signed-off-by: Torez Smith <torez@redhat.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/1570190373-30684-7-git-send-email-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/xhci.c | 23 +++++++++++++++++++++--
 1 file changed, 21 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index fe8f9ff58015..8c068d0cc7c1 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -3095,6 +3095,7 @@ static void xhci_endpoint_reset(struct usb_hcd *hcd,
 	unsigned int ep_index;
 	unsigned long flags;
 	u32 ep_flag;
+	int err;
 
 	xhci = hcd_to_xhci(hcd);
 	if (!host_ep->hcpriv)
@@ -3154,7 +3155,17 @@ static void xhci_endpoint_reset(struct usb_hcd *hcd,
 		xhci_free_command(xhci, cfg_cmd);
 		goto cleanup;
 	}
-	xhci_queue_stop_endpoint(xhci, stop_cmd, udev->slot_id, ep_index, 0);
+
+	err = xhci_queue_stop_endpoint(xhci, stop_cmd, udev->slot_id,
+					ep_index, 0);
+	if (err < 0) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		xhci_free_command(xhci, cfg_cmd);
+		xhci_dbg(xhci, "%s: Failed to queue stop ep command, %d ",
+				__func__, err);
+		goto cleanup;
+	}
+
 	xhci_ring_cmd_db(xhci);
 	spin_unlock_irqrestore(&xhci->lock, flags);
 
@@ -3168,8 +3179,16 @@ static void xhci_endpoint_reset(struct usb_hcd *hcd,
 					   ctrl_ctx, ep_flag, ep_flag);
 	xhci_endpoint_copy(xhci, cfg_cmd->in_ctx, vdev->out_ctx, ep_index);
 
-	xhci_queue_configure_endpoint(xhci, cfg_cmd, cfg_cmd->in_ctx->dma,
+	err = xhci_queue_configure_endpoint(xhci, cfg_cmd, cfg_cmd->in_ctx->dma,
 				      udev->slot_id, false);
+	if (err < 0) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		xhci_free_command(xhci, cfg_cmd);
+		xhci_dbg(xhci, "%s: Failed to queue config ep command, %d ",
+				__func__, err);
+		goto cleanup;
+	}
+
 	xhci_ring_cmd_db(xhci);
 	spin_unlock_irqrestore(&xhci->lock, flags);
 
-- 
2.23.0



                 reply	other threads:[~2019-10-04 12:33 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=157019238714363@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=William.Kuzeja@stratus.com \
    --cc=mathias.nyman@linux.intel.com \
    --cc=stable@vger.kernel.org \
    --cc=torez@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).