From: <gregkh@linuxfoundation.org>
To: yoshihiro.shimoda.uh@renesas.com, gregkh@linuxfoundation.org,
stable@vger.kernel.org
Subject: patch "usb: renesas_usbhs: gadget: Fix usb_ep_set_{halt,wedge}() behavior" added to usb-linus
Date: Fri, 04 Oct 2019 14:36:38 +0200 [thread overview]
Message-ID: <15701925984179@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
usb: renesas_usbhs: gadget: Fix usb_ep_set_{halt,wedge}() behavior
to my usb git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-linus branch.
The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)
The patch will hopefully also be merged in Linus's tree for the
next -rc kernel release.
If you have any questions about this process, please let me know.
From 4d599cd3a097a85a5c68a2c82b9a48cddf9953ec Mon Sep 17 00:00:00 2001
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Date: Tue, 1 Oct 2019 19:10:33 +0900
Subject: usb: renesas_usbhs: gadget: Fix usb_ep_set_{halt,wedge}() behavior
According to usb_ep_set_halt()'s description,
__usbhsg_ep_set_halt_wedge() should return -EAGAIN if the IN endpoint
has any queue or data. Otherwise, this driver is possible to cause
just STALL without sending a short packet data on g_mass_storage driver,
and then a few resetting a device happens on a host side during
a usb enumaration.
Fixes: 2f98382dcdfe ("usb: renesas_usbhs: Add Renesas USBHS Gadget")
Cc: <stable@vger.kernel.org> # v3.0+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1569924633-322-3-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/renesas_usbhs/common.h | 1 +
drivers/usb/renesas_usbhs/fifo.c | 2 +-
drivers/usb/renesas_usbhs/fifo.h | 1 +
drivers/usb/renesas_usbhs/mod_gadget.c | 16 +++++++++++++++-
drivers/usb/renesas_usbhs/pipe.c | 15 +++++++++++++++
drivers/usb/renesas_usbhs/pipe.h | 1 +
6 files changed, 34 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/renesas_usbhs/common.h b/drivers/usb/renesas_usbhs/common.h
index d1a0a35ecfff..0824099b905e 100644
--- a/drivers/usb/renesas_usbhs/common.h
+++ b/drivers/usb/renesas_usbhs/common.h
@@ -211,6 +211,7 @@ struct usbhs_priv;
/* DCPCTR */
#define BSTS (1 << 15) /* Buffer Status */
#define SUREQ (1 << 14) /* Sending SETUP Token */
+#define INBUFM (1 << 14) /* (PIPEnCTR) Transfer Buffer Monitor */
#define CSSTS (1 << 12) /* CSSTS Status */
#define ACLRM (1 << 9) /* Buffer Auto-Clear Mode */
#define SQCLR (1 << 8) /* Toggle Bit Clear */
diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c
index 2a01ceb71641..86637cd066cf 100644
--- a/drivers/usb/renesas_usbhs/fifo.c
+++ b/drivers/usb/renesas_usbhs/fifo.c
@@ -89,7 +89,7 @@ static void __usbhsf_pkt_del(struct usbhs_pkt *pkt)
list_del_init(&pkt->node);
}
-static struct usbhs_pkt *__usbhsf_pkt_get(struct usbhs_pipe *pipe)
+struct usbhs_pkt *__usbhsf_pkt_get(struct usbhs_pipe *pipe)
{
return list_first_entry_or_null(&pipe->list, struct usbhs_pkt, node);
}
diff --git a/drivers/usb/renesas_usbhs/fifo.h b/drivers/usb/renesas_usbhs/fifo.h
index 88d1816bcda2..c3d3cc35cee0 100644
--- a/drivers/usb/renesas_usbhs/fifo.h
+++ b/drivers/usb/renesas_usbhs/fifo.h
@@ -97,5 +97,6 @@ void usbhs_pkt_push(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt,
void *buf, int len, int zero, int sequence);
struct usbhs_pkt *usbhs_pkt_pop(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt);
void usbhs_pkt_start(struct usbhs_pipe *pipe);
+struct usbhs_pkt *__usbhsf_pkt_get(struct usbhs_pipe *pipe);
#endif /* RENESAS_USB_FIFO_H */
diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c
index 2c7523a211c0..e5ef56991dba 100644
--- a/drivers/usb/renesas_usbhs/mod_gadget.c
+++ b/drivers/usb/renesas_usbhs/mod_gadget.c
@@ -722,6 +722,7 @@ static int __usbhsg_ep_set_halt_wedge(struct usb_ep *ep, int halt, int wedge)
struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv);
struct device *dev = usbhsg_gpriv_to_dev(gpriv);
unsigned long flags;
+ int ret = 0;
dev_dbg(dev, "set halt %d (pipe %d)\n",
halt, usbhs_pipe_number(pipe));
@@ -729,6 +730,18 @@ static int __usbhsg_ep_set_halt_wedge(struct usb_ep *ep, int halt, int wedge)
/******************** spin lock ********************/
usbhs_lock(priv, flags);
+ /*
+ * According to usb_ep_set_halt()'s description, this function should
+ * return -EAGAIN if the IN endpoint has any queue or data. Note
+ * that the usbhs_pipe_is_dir_in() returns false if the pipe is an
+ * IN endpoint in the gadget mode.
+ */
+ if (!usbhs_pipe_is_dir_in(pipe) && (__usbhsf_pkt_get(pipe) ||
+ usbhs_pipe_contains_transmittable_data(pipe))) {
+ ret = -EAGAIN;
+ goto out;
+ }
+
if (halt)
usbhs_pipe_stall(pipe);
else
@@ -739,10 +752,11 @@ static int __usbhsg_ep_set_halt_wedge(struct usb_ep *ep, int halt, int wedge)
else
usbhsg_status_clr(gpriv, USBHSG_STATUS_WEDGE);
+out:
usbhs_unlock(priv, flags);
/******************** spin unlock ******************/
- return 0;
+ return ret;
}
static int usbhsg_ep_set_halt(struct usb_ep *ep, int value)
diff --git a/drivers/usb/renesas_usbhs/pipe.c b/drivers/usb/renesas_usbhs/pipe.c
index c4922b96c93b..9e5afdde1adb 100644
--- a/drivers/usb/renesas_usbhs/pipe.c
+++ b/drivers/usb/renesas_usbhs/pipe.c
@@ -277,6 +277,21 @@ int usbhs_pipe_is_accessible(struct usbhs_pipe *pipe)
return -EBUSY;
}
+bool usbhs_pipe_contains_transmittable_data(struct usbhs_pipe *pipe)
+{
+ u16 val;
+
+ /* Do not support for DCP pipe */
+ if (usbhs_pipe_is_dcp(pipe))
+ return false;
+
+ val = usbhsp_pipectrl_get(pipe);
+ if (val & INBUFM)
+ return true;
+
+ return false;
+}
+
/*
* PID ctrl
*/
diff --git a/drivers/usb/renesas_usbhs/pipe.h b/drivers/usb/renesas_usbhs/pipe.h
index 3080423e600c..3b130529408b 100644
--- a/drivers/usb/renesas_usbhs/pipe.h
+++ b/drivers/usb/renesas_usbhs/pipe.h
@@ -83,6 +83,7 @@ void usbhs_pipe_clear(struct usbhs_pipe *pipe);
void usbhs_pipe_clear_without_sequence(struct usbhs_pipe *pipe,
int needs_bfre, int bfre_enable);
int usbhs_pipe_is_accessible(struct usbhs_pipe *pipe);
+bool usbhs_pipe_contains_transmittable_data(struct usbhs_pipe *pipe);
void usbhs_pipe_enable(struct usbhs_pipe *pipe);
void usbhs_pipe_disable(struct usbhs_pipe *pipe);
void usbhs_pipe_stall(struct usbhs_pipe *pipe);
--
2.23.0
reply other threads:[~2019-10-04 12:36 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=15701925984179@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=stable@vger.kernel.org \
--cc=yoshihiro.shimoda.uh@renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).