Linux kernel -stable discussions
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: henryl@nvidia.com, gregkh@linuxfoundation.org,
	mathias.nyman@linux.intel.com, stable@vger.kernel.org
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] usb: xhci: only set D3hot for pci device" failed to apply to 4.9-stable tree
Date: Sun, 15 Dec 2019 10:24:11 +0100	[thread overview]
Message-ID: <157640185110204@kroah.com> (raw)


The patch below does not apply to the 4.9-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From f2c710f7dca8457e88b4ac9de2060f011254f9dd Mon Sep 17 00:00:00 2001
From: Henry Lin <henryl@nvidia.com>
Date: Wed, 11 Dec 2019 16:20:04 +0200
Subject: [PATCH] usb: xhci: only set D3hot for pci device

Xhci driver cannot call pci_set_power_state() on non-pci xhci host
controllers. For example, NVIDIA Tegra XHCI host controller which acts
as platform device with XHCI_SPURIOUS_WAKEUP quirk set in some platform
hits this issue during shutdown.

Cc: <stable@vger.kernel.org>
Fixes: 638298dc66ea ("xhci: Fix spurious wakeups after S5 on Haswell")
Signed-off-by: Henry Lin <henryl@nvidia.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20191211142007.8847-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index a0025d23b257..2907fe4d78dd 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -521,6 +521,18 @@ static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
 }
 #endif /* CONFIG_PM */
 
+static void xhci_pci_shutdown(struct usb_hcd *hcd)
+{
+	struct xhci_hcd		*xhci = hcd_to_xhci(hcd);
+	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
+
+	xhci_shutdown(hcd);
+
+	/* Yet another workaround for spurious wakeups at shutdown with HSW */
+	if (xhci->quirks & XHCI_SPURIOUS_WAKEUP)
+		pci_set_power_state(pdev, PCI_D3hot);
+}
+
 /*-------------------------------------------------------------------------*/
 
 /* PCI driver selection metadata; PCI hotplugging uses this */
@@ -556,6 +568,7 @@ static int __init xhci_pci_init(void)
 #ifdef CONFIG_PM
 	xhci_pci_hc_driver.pci_suspend = xhci_pci_suspend;
 	xhci_pci_hc_driver.pci_resume = xhci_pci_resume;
+	xhci_pci_hc_driver.shutdown = xhci_pci_shutdown;
 #endif
 	return pci_register_driver(&xhci_pci_driver);
 }
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 6721d059f58a..c5ee562c4c74 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -770,7 +770,7 @@ static void xhci_stop(struct usb_hcd *hcd)
  *
  * This will only ever be called with the main usb_hcd (the USB3 roothub).
  */
-static void xhci_shutdown(struct usb_hcd *hcd)
+void xhci_shutdown(struct usb_hcd *hcd)
 {
 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 
@@ -789,11 +789,8 @@ static void xhci_shutdown(struct usb_hcd *hcd)
 	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
 			"xhci_shutdown completed - status = %x",
 			readl(&xhci->op_regs->status));
-
-	/* Yet another workaround for spurious wakeups at shutdown with HSW */
-	if (xhci->quirks & XHCI_SPURIOUS_WAKEUP)
-		pci_set_power_state(to_pci_dev(hcd->self.sysdev), PCI_D3hot);
 }
+EXPORT_SYMBOL_GPL(xhci_shutdown);
 
 #ifdef CONFIG_PM
 static void xhci_save_registers(struct xhci_hcd *xhci)
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index dc6f62a4b197..13d8838cd552 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -2050,6 +2050,7 @@ int xhci_start(struct xhci_hcd *xhci);
 int xhci_reset(struct xhci_hcd *xhci);
 int xhci_run(struct usb_hcd *hcd);
 int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks);
+void xhci_shutdown(struct usb_hcd *hcd);
 void xhci_init_driver(struct hc_driver *drv,
 		      const struct xhci_driver_overrides *over);
 int xhci_disable_slot(struct xhci_hcd *xhci, u32 slot_id);


             reply	other threads:[~2019-12-15  9:24 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-15  9:24 gregkh [this message]
2019-12-15 17:39 ` FAILED: patch "[PATCH] usb: xhci: only set D3hot for pci device" failed to apply to 4.9-stable tree Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=157640185110204@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=henryl@nvidia.com \
    --cc=mathias.nyman@linux.intel.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox