FAILED: patch "[PATCH] ARM: dts: omap3-tao3530: Fix incorrect MMC card detection" failed to apply to 4.9-stable tree

FAILED: patch "[PATCH] ARM: dts: omap3-tao3530: Fix incorrect MMC card detection" failed to apply to 4.9-stable tree

[gregkh]

The patch below does not apply to the 4.9-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 287897f9aaa2ad1c923d9875914f57c4dc9159c8 Mon Sep 17 00:00:00 2001
From: Jarkko Nikula <jarkko.nikula@bitmer.com>
Date: Sat, 16 Nov 2019 17:16:51 +0200
Subject: [PATCH] ARM: dts: omap3-tao3530: Fix incorrect MMC card detection
 GPIO polarity

The MMC card detection GPIO polarity is active low on TAO3530, like in many
other similar boards. Now the card is not detected and it is unable to
mount rootfs from an SD card.

Fix this by using the correct polarity.

This incorrect polarity was defined already in the commit 30d95c6d7092
("ARM: dts: omap3: Add Technexion TAO3530 SOM omap3-tao3530.dtsi") in v3.18
kernel and later changed to use defined GPIO constants in v4.4 kernel by
the commit 3a637e008e54 ("ARM: dts: Use defined GPIO constants in flags
cell for OMAP2+ boards").

While the latter commit did not introduce the issue I'm marking it with
Fixes tag due the v4.4 kernels still being maintained.

Fixes: 3a637e008e54 ("ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards")
Cc: linux-stable <stable@vger.kernel.org> # 4.4+
Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi
index a7a04d78deeb..f24e2326cfa7 100644
--- a/arch/arm/boot/dts/omap3-tao3530.dtsi
+++ b/arch/arm/boot/dts/omap3-tao3530.dtsi
@@ -222,7 +222,7 @@ &mmc1 {
 	pinctrl-0 = <&mmc1_pins>;
 	vmmc-supply = <&vmmc1>;
 	vqmmc-supply = <&vsim>;
-	cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
 	bus-width = <8>;
 };
 

Re: FAILED: patch "[PATCH] ARM: dts: omap3-tao3530: Fix incorrect MMC card detection" failed to apply to 4.9-stable tree

[Sasha Levin]

On Sun, Dec 15, 2019 at 02:33:31PM +0100, gregkh@linuxfoundation.org wrote:
>
>The patch below does not apply to the 4.9-stable tree.
>If someone wants it applied there, or to any other stable or longterm
>tree, then please email the backport, including the original git commit
>id to <stable@vger.kernel.org>.
>
>thanks,
>
>greg k-h
>
>------------------ original commit in Linus's tree ------------------
>
>From 287897f9aaa2ad1c923d9875914f57c4dc9159c8 Mon Sep 17 00:00:00 2001
>From: Jarkko Nikula <jarkko.nikula@bitmer.com>
>Date: Sat, 16 Nov 2019 17:16:51 +0200
>Subject: [PATCH] ARM: dts: omap3-tao3530: Fix incorrect MMC card detection
> GPIO polarity
>
>The MMC card detection GPIO polarity is active low on TAO3530, like in many
>other similar boards. Now the card is not detected and it is unable to
>mount rootfs from an SD card.
>
>Fix this by using the correct polarity.
>
>This incorrect polarity was defined already in the commit 30d95c6d7092
>("ARM: dts: omap3: Add Technexion TAO3530 SOM omap3-tao3530.dtsi") in v3.18
>kernel and later changed to use defined GPIO constants in v4.4 kernel by
>the commit 3a637e008e54 ("ARM: dts: Use defined GPIO constants in flags
>cell for OMAP2+ boards").
>
>While the latter commit did not introduce the issue I'm marking it with
>Fixes tag due the v4.4 kernels still being maintained.
>
>Fixes: 3a637e008e54 ("ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards")
>Cc: linux-stable <stable@vger.kernel.org> # 4.4+
>Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
>Signed-off-by: Tony Lindgren <tony@atomide.com>

Fixed up context and queued for 4.9 and 4.4.

-- 
Thanks,
Sasha