From: <gregkh@linuxfoundation.org>
To: mpatocka@redhat.com, heinzm@redhat.com, snitzer@redhat.com
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] dm integrity: fix a deadlock due to offloading to an" failed to apply to 4.14-stable tree
Date: Mon, 09 Mar 2020 21:05:25 +0100 [thread overview]
Message-ID: <158378432520624@kroah.com> (raw)
The patch below does not apply to the 4.14-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 53770f0ec5fd417429775ba006bc4abe14002335 Mon Sep 17 00:00:00 2001
From: Mikulas Patocka <mpatocka@redhat.com>
Date: Mon, 17 Feb 2020 07:43:03 -0500
Subject: [PATCH] dm integrity: fix a deadlock due to offloading to an
incorrect workqueue
If we need to perform synchronous I/O in dm_integrity_map_continue(),
we must make sure that we are not in the map function - in order to
avoid the deadlock due to bio queuing in generic_make_request. To
avoid the deadlock, we offload the request to metadata_wq.
However, metadata_wq also processes metadata updates for write requests.
If there are too many requests that get offloaded to metadata_wq at the
beginning of dm_integrity_map_continue, the workqueue metadata_wq
becomes clogged and the system is incapable of processing any metadata
updates.
This causes a deadlock because all the requests that need to do metadata
updates wait for metadata_wq to proceed and metadata_wq waits inside
wait_and_add_new_range until some existing request releases its range
lock (which doesn't happen because the range lock is released after
metadata update).
In order to fix the deadlock, we create a new workqueue offload_wq and
offload requests to it - so that processing of offload_wq is independent
from processing of metadata_wq.
Fixes: 7eada909bfd7 ("dm: add integrity target")
Cc: stable@vger.kernel.org # v4.12+
Reported-by: Heinz Mauelshagen <heinzm@redhat.com>
Tested-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
diff --git a/drivers/md/dm-integrity.c b/drivers/md/dm-integrity.c
index 166727a47cef..6b6c3e1deaa8 100644
--- a/drivers/md/dm-integrity.c
+++ b/drivers/md/dm-integrity.c
@@ -212,6 +212,7 @@ struct dm_integrity_c {
struct list_head wait_list;
wait_queue_head_t endio_wait;
struct workqueue_struct *wait_wq;
+ struct workqueue_struct *offload_wq;
unsigned char commit_seq;
commit_id_t commit_ids[N_COMMIT_IDS];
@@ -1439,7 +1440,7 @@ static void dec_in_flight(struct dm_integrity_io *dio)
dio->range.logical_sector += dio->range.n_sectors;
bio_advance(bio, dio->range.n_sectors << SECTOR_SHIFT);
INIT_WORK(&dio->work, integrity_bio_wait);
- queue_work(ic->wait_wq, &dio->work);
+ queue_work(ic->offload_wq, &dio->work);
return;
}
do_endio_flush(ic, dio);
@@ -1865,7 +1866,7 @@ static void dm_integrity_map_continue(struct dm_integrity_io *dio, bool from_map
if (need_sync_io && from_map) {
INIT_WORK(&dio->work, integrity_bio_wait);
- queue_work(ic->metadata_wq, &dio->work);
+ queue_work(ic->offload_wq, &dio->work);
return;
}
@@ -2501,7 +2502,7 @@ static void bitmap_block_work(struct work_struct *w)
dio->range.n_sectors, BITMAP_OP_TEST_ALL_SET)) {
remove_range(ic, &dio->range);
INIT_WORK(&dio->work, integrity_bio_wait);
- queue_work(ic->wait_wq, &dio->work);
+ queue_work(ic->offload_wq, &dio->work);
} else {
block_bitmap_op(ic, ic->journal, dio->range.logical_sector,
dio->range.n_sectors, BITMAP_OP_SET);
@@ -2524,7 +2525,7 @@ static void bitmap_block_work(struct work_struct *w)
remove_range(ic, &dio->range);
INIT_WORK(&dio->work, integrity_bio_wait);
- queue_work(ic->wait_wq, &dio->work);
+ queue_work(ic->offload_wq, &dio->work);
}
queue_delayed_work(ic->commit_wq, &ic->bitmap_flush_work, ic->bitmap_flush_interval);
@@ -3843,6 +3844,14 @@ static int dm_integrity_ctr(struct dm_target *ti, unsigned argc, char **argv)
goto bad;
}
+ ic->offload_wq = alloc_workqueue("dm-integrity-offload", WQ_MEM_RECLAIM,
+ METADATA_WORKQUEUE_MAX_ACTIVE);
+ if (!ic->offload_wq) {
+ ti->error = "Cannot allocate workqueue";
+ r = -ENOMEM;
+ goto bad;
+ }
+
ic->commit_wq = alloc_workqueue("dm-integrity-commit", WQ_MEM_RECLAIM, 1);
if (!ic->commit_wq) {
ti->error = "Cannot allocate workqueue";
@@ -4147,6 +4156,8 @@ static void dm_integrity_dtr(struct dm_target *ti)
destroy_workqueue(ic->metadata_wq);
if (ic->wait_wq)
destroy_workqueue(ic->wait_wq);
+ if (ic->offload_wq)
+ destroy_workqueue(ic->offload_wq);
if (ic->commit_wq)
destroy_workqueue(ic->commit_wq);
if (ic->writer_wq)
reply other threads:[~2020-03-09 20:05 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=158378432520624@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=heinzm@redhat.com \
--cc=mpatocka@redhat.com \
--cc=snitzer@redhat.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).