stable.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: valex@mellanox.com, jgg@mellanox.com, lariel@mellanox.com,
	leonro@mellanox.com, stable@vger.kernel.org
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] IB/mlx5: Replace tunnel mpls capability bits for" failed to apply to 4.19-stable tree
Date: Fri, 10 Apr 2020 11:01:43 +0200	[thread overview]
Message-ID: <1586509303211183@kroah.com> (raw)


The patch below does not apply to the 4.19-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 41e684ef3f37ce6e5eac3fb5b9c7c1853f4b0447 Mon Sep 17 00:00:00 2001
From: Alex Vesker <valex@mellanox.com>
Date: Thu, 5 Mar 2020 14:38:41 +0200
Subject: [PATCH] IB/mlx5: Replace tunnel mpls capability bits for
 tunnel_offloads

Until now the flex parser capability was used in ib_query_device() to
indicate tunnel_offloads_caps support for mpls_over_gre/mpls_over_udp.

Newer devices and firmware will have configurations with the flexparser
but without mpls support.

Testing for the flex parser capability was a mistake, the tunnel_stateless
capability was intended for detecting mpls and was introduced at the same
time as the flex parser capability.

Otherwise userspace will be incorrectly informed that a future device
supports MPLS when it does not.

Link: https://lore.kernel.org/r/20200305123841.196086-1-leon@kernel.org
Cc: <stable@vger.kernel.org> # 4.17
Fixes: e818e255a58d ("IB/mlx5: Expose MPLS related tunneling offloads")
Signed-off-by: Alex Vesker <valex@mellanox.com>
Reviewed-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c
index eba7604eaa76..9c3993c7e9a1 100644
--- a/drivers/infiniband/hw/mlx5/main.c
+++ b/drivers/infiniband/hw/mlx5/main.c
@@ -1192,12 +1192,10 @@ static int mlx5_ib_query_device(struct ib_device *ibdev,
 		if (MLX5_CAP_ETH(mdev, tunnel_stateless_gre))
 			resp.tunnel_offloads_caps |=
 				MLX5_IB_TUNNELED_OFFLOADS_GRE;
-		if (MLX5_CAP_GEN(mdev, flex_parser_protocols) &
-		    MLX5_FLEX_PROTO_CW_MPLS_GRE)
+		if (MLX5_CAP_ETH(mdev, tunnel_stateless_mpls_over_gre))
 			resp.tunnel_offloads_caps |=
 				MLX5_IB_TUNNELED_OFFLOADS_MPLS_GRE;
-		if (MLX5_CAP_GEN(mdev, flex_parser_protocols) &
-		    MLX5_FLEX_PROTO_CW_MPLS_UDP)
+		if (MLX5_CAP_ETH(mdev, tunnel_stateless_mpls_over_udp))
 			resp.tunnel_offloads_caps |=
 				MLX5_IB_TUNNELED_OFFLOADS_MPLS_UDP;
 	}
diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h
index f9bcbe653fda..f3a7189f9d6d 100644
--- a/include/linux/mlx5/mlx5_ifc.h
+++ b/include/linux/mlx5/mlx5_ifc.h
@@ -877,7 +877,11 @@ struct mlx5_ifc_per_protocol_networking_offload_caps_bits {
 	u8         swp_csum[0x1];
 	u8         swp_lso[0x1];
 	u8         cqe_checksum_full[0x1];
-	u8         reserved_at_24[0x5];
+	u8         tunnel_stateless_geneve_tx[0x1];
+	u8         tunnel_stateless_mpls_over_udp[0x1];
+	u8         tunnel_stateless_mpls_over_gre[0x1];
+	u8         tunnel_stateless_vxlan_gpe[0x1];
+	u8         tunnel_stateless_ipv4_over_vxlan[0x1];
 	u8         tunnel_stateless_ip_over_ip[0x1];
 	u8         reserved_at_2a[0x6];
 	u8         max_vxlan_udp_ports[0x8];


             reply	other threads:[~2020-04-10  9:01 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-10  9:01 gregkh [this message]
2020-04-14  2:26 ` FAILED: patch "[PATCH] IB/mlx5: Replace tunnel mpls capability bits for" failed to apply to 4.19-stable tree Sasha Levin
2020-04-14  7:39   ` Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1586509303211183@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=jgg@mellanox.com \
    --cc=lariel@mellanox.com \
    --cc=leonro@mellanox.com \
    --cc=stable@vger.kernel.org \
    --cc=valex@mellanox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).