From: <gregkh@linuxfoundation.org>
To: justin.swartz@risingedge.co.za, heiko@sntech.de
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] clk: rockchip: fix incorrect configuration of rk3228" failed to apply to 4.9-stable tree
Date: Mon, 18 May 2020 15:56:31 +0200 [thread overview]
Message-ID: <15898101914101@kroah.com> (raw)
The patch below does not apply to the 4.9-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From cec9d101d70a3509da9bd2e601e0b242154ce616 Mon Sep 17 00:00:00 2001
From: Justin Swartz <justin.swartz@risingedge.co.za>
Date: Tue, 14 Jan 2020 16:25:02 +0000
Subject: [PATCH] clk: rockchip: fix incorrect configuration of rk3228
aclk_gpu* clocks
The following changes prevent the unrecoverable freezes and rcu_sched
stall warnings experienced in each of my attempts to take advantage of
lima.
Replace the COMPOSITE_NOGATE definition of aclk_gpu_pre with a
COMPOSITE that retains the selection of HDMIPHY as the PLL source, but
instead makes uses of the aclk_gpu PLL source gate and parent names
defined by mux_pll_src_4plls_p rather than mux_aclk_gpu_pre_p.
Remove the now unused mux_aclk_gpu_pre_p and the four named but also
unused definitions (cpll_gpu, gpll_gpu, hdmiphy_gpu and usb480m_gpu)
of the aclk_gpu PLL source gate.
Use the correct gate offset for aclk_gpu and aclk_gpu_noc.
Fixes: 307a2e9ac524 ("clk: rockchip: add clock controller for rk3228")
Cc: stable@vger.kernel.org
Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za>
[double-checked against SoC manual and added fixes tag]
Link: https://lore.kernel.org/r/20200114162503.7548-1-justin.swartz@risingedge.co.za
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
diff --git a/drivers/clk/rockchip/clk-rk3228.c b/drivers/clk/rockchip/clk-rk3228.c
index d17cfb7a3ff4..d7243c09cc84 100644
--- a/drivers/clk/rockchip/clk-rk3228.c
+++ b/drivers/clk/rockchip/clk-rk3228.c
@@ -156,8 +156,6 @@ PNAME(mux_i2s_out_p) = { "i2s1_pre", "xin12m" };
PNAME(mux_i2s2_p) = { "i2s2_src", "i2s2_frac", "xin12m" };
PNAME(mux_sclk_spdif_p) = { "sclk_spdif_src", "spdif_frac", "xin12m" };
-PNAME(mux_aclk_gpu_pre_p) = { "cpll_gpu", "gpll_gpu", "hdmiphy_gpu", "usb480m_gpu" };
-
PNAME(mux_uart0_p) = { "uart0_src", "uart0_frac", "xin24m" };
PNAME(mux_uart1_p) = { "uart1_src", "uart1_frac", "xin24m" };
PNAME(mux_uart2_p) = { "uart2_src", "uart2_frac", "xin24m" };
@@ -468,16 +466,9 @@ static struct rockchip_clk_branch rk3228_clk_branches[] __initdata = {
RK2928_CLKSEL_CON(24), 6, 10, DFLAGS,
RK2928_CLKGATE_CON(2), 8, GFLAGS),
- GATE(0, "cpll_gpu", "cpll", 0,
- RK2928_CLKGATE_CON(3), 13, GFLAGS),
- GATE(0, "gpll_gpu", "gpll", 0,
- RK2928_CLKGATE_CON(3), 13, GFLAGS),
- GATE(0, "hdmiphy_gpu", "hdmiphy", 0,
- RK2928_CLKGATE_CON(3), 13, GFLAGS),
- GATE(0, "usb480m_gpu", "usb480m", 0,
+ COMPOSITE(0, "aclk_gpu_pre", mux_pll_src_4plls_p, 0,
+ RK2928_CLKSEL_CON(34), 5, 2, MFLAGS, 0, 5, DFLAGS,
RK2928_CLKGATE_CON(3), 13, GFLAGS),
- COMPOSITE_NOGATE(0, "aclk_gpu_pre", mux_aclk_gpu_pre_p, 0,
- RK2928_CLKSEL_CON(34), 5, 2, MFLAGS, 0, 5, DFLAGS),
COMPOSITE(SCLK_SPI0, "sclk_spi0", mux_pll_src_2plls_p, 0,
RK2928_CLKSEL_CON(25), 8, 1, MFLAGS, 0, 7, DFLAGS,
@@ -582,8 +573,8 @@ static struct rockchip_clk_branch rk3228_clk_branches[] __initdata = {
GATE(0, "pclk_peri_noc", "pclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(12), 2, GFLAGS),
/* PD_GPU */
- GATE(ACLK_GPU, "aclk_gpu", "aclk_gpu_pre", 0, RK2928_CLKGATE_CON(13), 14, GFLAGS),
- GATE(0, "aclk_gpu_noc", "aclk_gpu_pre", 0, RK2928_CLKGATE_CON(13), 15, GFLAGS),
+ GATE(ACLK_GPU, "aclk_gpu", "aclk_gpu_pre", 0, RK2928_CLKGATE_CON(7), 14, GFLAGS),
+ GATE(0, "aclk_gpu_noc", "aclk_gpu_pre", 0, RK2928_CLKGATE_CON(7), 15, GFLAGS),
/* PD_BUS */
GATE(0, "sclk_initmem_mbist", "aclk_cpu", 0, RK2928_CLKGATE_CON(8), 1, GFLAGS),
reply other threads:[~2020-05-18 13:56 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=15898101914101@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=heiko@sntech.de \
--cc=justin.swartz@risingedge.co.za \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).