FAILED: patch "[PATCH] iio: sca3000: Remove an erroneous 'get_device()'" failed to apply to 4.4-stable tree

FAILED: patch "[PATCH] iio: sca3000: Remove an erroneous 'get_device()'" failed to apply to 4.4-stable tree

[gregkh]

The patch below does not apply to the 4.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 928edefbc18cd8433f7df235c6e09a9306e7d580 Mon Sep 17 00:00:00 2001
From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Date: Wed, 6 May 2020 05:52:06 +0200
Subject: [PATCH] iio: sca3000: Remove an erroneous 'get_device()'

This looks really unusual to have a 'get_device()' hidden in a 'dev_err()'
call.
Remove it.

While at it add a missing \n at the end of the message.

Fixes: 574fb258d636 ("Staging: IIO: VTI sca3000 series accelerometer driver (spi)")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

diff --git a/drivers/iio/accel/sca3000.c b/drivers/iio/accel/sca3000.c
index 66d768d971e1..6e429072e44a 100644
--- a/drivers/iio/accel/sca3000.c
+++ b/drivers/iio/accel/sca3000.c
@@ -980,7 +980,7 @@ static int sca3000_read_data(struct sca3000_state *st,
 	st->tx[0] = SCA3000_READ_REG(reg_address_high);
 	ret = spi_sync_transfer(st->us, xfer, ARRAY_SIZE(xfer));
 	if (ret) {
-		dev_err(get_device(&st->us->dev), "problem reading register");
+		dev_err(&st->us->dev, "problem reading register\n");
 		return ret;
 	}