FAILED: patch "[PATCH] USB: serial: cp210x: re-enable auto-RTS on open" failed to apply to 4.4-stable tree

FAILED: patch "[PATCH] USB: serial: cp210x: re-enable auto-RTS on open" failed to apply to 4.4-stable tree

[gregkh]

The patch below does not apply to the 4.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From c7614ff9b73a1e6fb2b1b51396da132ed22fecdb Mon Sep 17 00:00:00 2001
From: Brant Merryman <brant.merryman@silabs.com>
Date: Fri, 26 Jun 2020 04:24:20 +0000
Subject: [PATCH] USB: serial: cp210x: re-enable auto-RTS on open

CP210x hardware disables auto-RTS but leaves auto-CTS when in hardware
flow control mode and UART on cp210x hardware is disabled. When
re-opening the port, if auto-CTS is enabled on the cp210x, then auto-RTS
must be re-enabled in the driver.

Signed-off-by: Brant Merryman <brant.merryman@silabs.com>
Co-developed-by: Phu Luu <phu.luu@silabs.com>
Signed-off-by: Phu Luu <phu.luu@silabs.com>
Link: https://lore.kernel.org/r/ECCF8E73-91F3-4080-BE17-1714BC8818FB@silabs.com
[ johan: fix up tags and problem description ]
Fixes: 39a66b8d22a3 ("[PATCH] USB: CP2101 Add support for flow control")
Cc: stable <stable@vger.kernel.org>     # 2.6.12
Signed-off-by: Johan Hovold <johan@kernel.org>

diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index bcceb4ad8be0..a90801ef0055 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -917,6 +917,7 @@ static void cp210x_get_termios_port(struct usb_serial_port *port,
 	u32 baud;
 	u16 bits;
 	u32 ctl_hs;
+	u32 flow_repl;
 
 	cp210x_read_u32_reg(port, CP210X_GET_BAUDRATE, &baud);
 
@@ -1017,6 +1018,22 @@ static void cp210x_get_termios_port(struct usb_serial_port *port,
 	ctl_hs = le32_to_cpu(flow_ctl.ulControlHandshake);
 	if (ctl_hs & CP210X_SERIAL_CTS_HANDSHAKE) {
 		dev_dbg(dev, "%s - flow control = CRTSCTS\n", __func__);
+		/*
+		 * When the port is closed, the CP210x hardware disables
+		 * auto-RTS and RTS is deasserted but it leaves auto-CTS when
+		 * in hardware flow control mode. When re-opening the port, if
+		 * auto-CTS is enabled on the cp210x, then auto-RTS must be
+		 * re-enabled in the driver.
+		 */
+		flow_repl = le32_to_cpu(flow_ctl.ulFlowReplace);
+		flow_repl &= ~CP210X_SERIAL_RTS_MASK;
+		flow_repl |= CP210X_SERIAL_RTS_SHIFT(CP210X_SERIAL_RTS_FLOW_CTL);
+		flow_ctl.ulFlowReplace = cpu_to_le32(flow_repl);
+		cp210x_write_reg_block(port,
+				CP210X_SET_FLOW,
+				&flow_ctl,
+				sizeof(flow_ctl));
+
 		cflag |= CRTSCTS;
 	} else {
 		dev_dbg(dev, "%s - flow control = NONE\n", __func__);