FAILED: patch "[PATCH] PM / devfreq: rk3399_dmc: Fix kernel oops when rockchip,pmu" failed to apply to 5.4-stable tree

FAILED: patch "[PATCH] PM / devfreq: rk3399_dmc: Fix kernel oops when rockchip,pmu" failed to apply to 5.4-stable tree

[gregkh]

The patch below does not apply to the 5.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 63ef91f24f9bfc70b6446319f6cabfd094481372 Mon Sep 17 00:00:00 2001
From: Marc Zyngier <maz@kernel.org>
Date: Tue, 30 Jun 2020 11:05:46 +0100
Subject: [PATCH] PM / devfreq: rk3399_dmc: Fix kernel oops when rockchip,pmu
 is absent

Booting a recent kernel on a rk3399-based system (nanopc-t4),
equipped with a recent u-boot and ATF results in an Oops due
to a NULL pointer dereference.

This turns out to be due to the rk3399-dmc driver looking for
an *undocumented* property (rockchip,pmu), and happily using
a NULL pointer when the property isn't there.

Instead, make most of what was brought in with 9173c5ceb035
("PM / devfreq: rk3399_dmc: Pass ODT and auto power down parameters
to TF-A.") conditioned on finding this property in the device-tree,
preventing the driver from exploding.

Cc: stable@vger.kernel.org
Fixes: 9173c5ceb035 ("PM / devfreq: rk3399_dmc: Pass ODT and auto power down parameters to TF-A.")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

diff --git a/drivers/devfreq/rk3399_dmc.c b/drivers/devfreq/rk3399_dmc.c
index 24f04f78285b..027769e39f9b 100644
--- a/drivers/devfreq/rk3399_dmc.c
+++ b/drivers/devfreq/rk3399_dmc.c
@@ -95,18 +95,20 @@ static int rk3399_dmcfreq_target(struct device *dev, unsigned long *freq,
 
 	mutex_lock(&dmcfreq->lock);
 
-	if (target_rate >= dmcfreq->odt_dis_freq)
-		odt_enable = true;
-
-	/*
-	 * This makes a SMC call to the TF-A to set the DDR PD (power-down)
-	 * timings and to enable or disable the ODT (on-die termination)
-	 * resistors.
-	 */
-	arm_smccc_smc(ROCKCHIP_SIP_DRAM_FREQ, dmcfreq->odt_pd_arg0,
-		      dmcfreq->odt_pd_arg1,
-		      ROCKCHIP_SIP_CONFIG_DRAM_SET_ODT_PD,
-		      odt_enable, 0, 0, 0, &res);
+	if (dmcfreq->regmap_pmu) {
+		if (target_rate >= dmcfreq->odt_dis_freq)
+			odt_enable = true;
+
+		/*
+		 * This makes a SMC call to the TF-A to set the DDR PD
+		 * (power-down) timings and to enable or disable the
+		 * ODT (on-die termination) resistors.
+		 */
+		arm_smccc_smc(ROCKCHIP_SIP_DRAM_FREQ, dmcfreq->odt_pd_arg0,
+			      dmcfreq->odt_pd_arg1,
+			      ROCKCHIP_SIP_CONFIG_DRAM_SET_ODT_PD,
+			      odt_enable, 0, 0, 0, &res);
+	}
 
 	/*
 	 * If frequency scaling from low to high, adjust voltage first.
@@ -371,13 +373,14 @@ static int rk3399_dmcfreq_probe(struct platform_device *pdev)
 	}
 
 	node = of_parse_phandle(np, "rockchip,pmu", 0);
-	if (node) {
-		data->regmap_pmu = syscon_node_to_regmap(node);
-		of_node_put(node);
-		if (IS_ERR(data->regmap_pmu)) {
-			ret = PTR_ERR(data->regmap_pmu);
-			goto err_edev;
-		}
+	if (!node)
+		goto no_pmu;
+
+	data->regmap_pmu = syscon_node_to_regmap(node);
+	of_node_put(node);
+	if (IS_ERR(data->regmap_pmu)) {
+		ret = PTR_ERR(data->regmap_pmu);
+		goto err_edev;
 	}
 
 	regmap_read(data->regmap_pmu, RK3399_PMUGRF_OS_REG2, &val);
@@ -399,6 +402,7 @@ static int rk3399_dmcfreq_probe(struct platform_device *pdev)
 		goto err_edev;
 	};
 
+no_pmu:
 	arm_smccc_smc(ROCKCHIP_SIP_DRAM_FREQ, 0, 0,
 		      ROCKCHIP_SIP_CONFIG_DRAM_INIT,
 		      0, 0, 0, 0, &res);