public inbox for stable@vger.kernel.org
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: dianders@chromium.org, bjorn.andersson@linaro.org,
	linus.walleij@linaro.org, mkshah@codeaurora.org,
	swboyd@chromium.org
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] pinctrl: qcom: Properly clear "intr_ack_high" interrupts when" failed to apply to 5.10-stable tree
Date: Mon, 25 Jan 2021 15:41:14 +0100	[thread overview]
Message-ID: <1611585674115135@kroah.com> (raw)


The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From a95881d6aa2c000e3649f27a1a7329cf356e6bb3 Mon Sep 17 00:00:00 2001
From: Douglas Anderson <dianders@chromium.org>
Date: Thu, 14 Jan 2021 19:16:23 -0800
Subject: [PATCH] pinctrl: qcom: Properly clear "intr_ack_high" interrupts when
 unmasking

In commit 4b7618fdc7e6 ("pinctrl: qcom: Add irq_enable callback for
msm gpio") we tried to Ack interrupts during unmask.  However, that
patch forgot to check "intr_ack_high" so, presumably, it only worked
for a certain subset of SoCs.

Let's add a small accessor so we don't need to open-code the logic in
both places.

This was found by code inspection.  I don't have any access to the
hardware in question nor software that needs the Ack during unmask.

Fixes: 4b7618fdc7e6 ("pinctrl: qcom: Add irq_enable callback for msm gpio")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210114191601.v7.3.I32d0f4e174d45363b49ab611a13c3da8f1e87d0f@changeid
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
index 2f363c28d9d9..192ed31eabf4 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
@@ -96,6 +96,14 @@ MSM_ACCESSOR(intr_cfg)
 MSM_ACCESSOR(intr_status)
 MSM_ACCESSOR(intr_target)
 
+static void msm_ack_intr_status(struct msm_pinctrl *pctrl,
+				const struct msm_pingroup *g)
+{
+	u32 val = g->intr_ack_high ? BIT(g->intr_status_bit) : 0;
+
+	msm_writel_intr_status(val, pctrl, g);
+}
+
 static int msm_get_groups_count(struct pinctrl_dev *pctldev)
 {
 	struct msm_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
@@ -797,7 +805,7 @@ static void msm_gpio_irq_clear_unmask(struct irq_data *d, bool status_clear)
 	 * when the interrupt is not in use.
 	 */
 	if (status_clear)
-		msm_writel_intr_status(0, pctrl, g);
+		msm_ack_intr_status(pctrl, g);
 
 	val = msm_readl_intr_cfg(pctrl, g);
 	val |= BIT(g->intr_raw_status_bit);
@@ -890,7 +898,6 @@ static void msm_gpio_irq_ack(struct irq_data *d)
 	struct msm_pinctrl *pctrl = gpiochip_get_data(gc);
 	const struct msm_pingroup *g;
 	unsigned long flags;
-	u32 val;
 
 	if (test_bit(d->hwirq, pctrl->skip_wake_irqs)) {
 		if (test_bit(d->hwirq, pctrl->dual_edge_irqs))
@@ -902,8 +909,7 @@ static void msm_gpio_irq_ack(struct irq_data *d)
 
 	raw_spin_lock_irqsave(&pctrl->lock, flags);
 
-	val = g->intr_ack_high ? BIT(g->intr_status_bit) : 0;
-	msm_writel_intr_status(val, pctrl, g);
+	msm_ack_intr_status(pctrl, g);
 
 	if (test_bit(d->hwirq, pctrl->dual_edge_irqs))
 		msm_gpio_update_dual_edge_pos(pctrl, g, d);


             reply	other threads:[~2021-01-25 14:44 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-25 14:41 gregkh [this message]
2021-01-25 16:11 ` FAILED: patch "[PATCH] pinctrl: qcom: Properly clear "intr_ack_high" interrupts when" failed to apply to 5.10-stable tree Doug Anderson
2021-01-25 16:19   ` Greg Kroah-Hartman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1611585674115135@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=dianders@chromium.org \
    --cc=linus.walleij@linaro.org \
    --cc=mkshah@codeaurora.org \
    --cc=stable@vger.kernel.org \
    --cc=swboyd@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox