From: <gregkh@linuxfoundation.org>
To: badhri@google.com, Adam.Thomson.Opensource@diasemi.com,
gregkh@linuxfoundation.org, heikki.krogerus@linux.intel.com,
linux@roeck-us.net, stable@vger.kernel.org
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] usb: typec: tcpm: Address incorrect values of tcpm psy for" failed to apply to 4.19-stable tree
Date: Wed, 12 May 2021 10:43:35 +0200 [thread overview]
Message-ID: <1620809015217252@kroah.com> (raw)
The patch below does not apply to the 4.19-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From f3dedafb8263ca4791a92a23f5230068f5bde008 Mon Sep 17 00:00:00 2001
From: Badhri Jagan Sridharan <badhri@google.com>
Date: Wed, 7 Apr 2021 13:07:18 -0700
Subject: [PATCH] usb: typec: tcpm: Address incorrect values of tcpm psy for
fixed supply
tcpm_pd_build_request overwrites current_limit and supply_voltage
even before port partner accepts the requests. This leaves stale
values in current_limit and supply_voltage that get exported by
"tcpm-source-psy-". Solving this problem by caching the request
values of current limit/supply voltage in req_current_limit
and req_supply_voltage. current_limit/supply_voltage gets updated
once the port partner accepts the request.
Fixes: f2a8aa053c176 ("typec: tcpm: Represent source supply through power_supply")
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20210407200723.1914388-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
index ca1fc77697fc..4ea4b30ae885 100644
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -389,7 +389,10 @@ struct tcpm_port {
unsigned int operating_snk_mw;
bool update_sink_caps;
- /* Requested current / voltage */
+ /* Requested current / voltage to the port partner */
+ u32 req_current_limit;
+ u32 req_supply_voltage;
+ /* Actual current / voltage limit of the local port */
u32 current_limit;
u32 supply_voltage;
@@ -2435,8 +2438,8 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port,
case SNK_TRANSITION_SINK:
if (port->vbus_present) {
tcpm_set_current_limit(port,
- port->current_limit,
- port->supply_voltage);
+ port->req_current_limit,
+ port->req_supply_voltage);
port->explicit_contract = true;
tcpm_set_auto_vbus_discharge_threshold(port,
TYPEC_PWR_MODE_PD,
@@ -2545,8 +2548,8 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port,
break;
case SNK_NEGOTIATE_PPS_CAPABILITIES:
port->pps_data.active = true;
- port->supply_voltage = port->pps_data.out_volt;
- port->current_limit = port->pps_data.op_curr;
+ port->req_supply_voltage = port->pps_data.out_volt;
+ port->req_current_limit = port->pps_data.op_curr;
tcpm_set_state(port, SNK_TRANSITION_SINK, 0);
break;
case SOFT_RESET_SEND:
@@ -3195,8 +3198,8 @@ static int tcpm_pd_build_request(struct tcpm_port *port, u32 *rdo)
flags & RDO_CAP_MISMATCH ? " [mismatch]" : "");
}
- port->current_limit = ma;
- port->supply_voltage = mv;
+ port->req_current_limit = ma;
+ port->req_supply_voltage = mv;
return 0;
}
next reply other threads:[~2021-05-12 8:43 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-12 8:43 gregkh [this message]
-- strict thread matches above, loose matches on Subject: below --
2021-05-12 8:45 FAILED: patch "[PATCH] usb: typec: tcpm: Address incorrect values of tcpm psy for" failed to apply to 4.19-stable tree gregkh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1620809015217252@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=Adam.Thomson.Opensource@diasemi.com \
--cc=badhri@google.com \
--cc=heikki.krogerus@linux.intel.com \
--cc=linux@roeck-us.net \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox