From: <gregkh@linuxfoundation.org>
To: sbinding@opensource.cirrus.com, stable@vger.kernel.org,
tiwai@suse.de, vicamo.yang@canonical.com,
vitalyr@opensource.cirrus.com
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] ALSA: hda/cirrus: Use CS8409 filter to fix abnormal sounds on" failed to apply to 5.4-stable tree
Date: Wed, 12 May 2021 12:06:14 +0200 [thread overview]
Message-ID: <162081397415219@kroah.com> (raw)
The patch below does not apply to the 5.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 45b14fe200ba0611b6c3874aa5bba584dc979fb9 Mon Sep 17 00:00:00 2001
From: Stefan Binding <sbinding@opensource.cirrus.com>
Date: Mon, 26 Apr 2021 17:37:49 +0100
Subject: [PATCH] ALSA: hda/cirrus: Use CS8409 filter to fix abnormal sounds on
Bullseye
Cracking noises have been reported on the built-in speaker for certain
Bullseye platforms, when volume is > 80%.
This issue is caused by the specific combination of Codec and AMP in
this platform, and cannot be fixed by the AMP, so indead must be fixed
at codec level, by adding attenuation to the volume.
Tested on DELL Inspiron-3505, DELL Inspiron-3501, DELL Inspiron-3500
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1924997
Reported-and-tested-by: You-Sheng Yang <vicamo.yang@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210426163749.196153-3-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
diff --git a/sound/pci/hda/patch_cirrus.c b/sound/pci/hda/patch_cirrus.c
index a4f82f147ff3..726507d0b04c 100644
--- a/sound/pci/hda/patch_cirrus.c
+++ b/sound/pci/hda/patch_cirrus.c
@@ -1481,6 +1481,34 @@ static const struct cs8409_cir_param cs8409_cs42l42_hw_cfg[] = {
{} /* Terminator */
};
+static const struct cs8409_cir_param cs8409_cs42l42_bullseye_atn[] = {
+ { 0x47, 0x65, 0x4000 }, /* EQ_SEL=1, EQ1/2_EN=0 */
+ { 0x47, 0x64, 0x4000 }, /* +EQ_ACC */
+ { 0x47, 0x65, 0x4010 }, /* +EQ2_EN */
+ { 0x47, 0x63, 0x0647 }, /* EQ_DATA_HI=0x0647 */
+ { 0x47, 0x64, 0xc0c7 }, /* +EQ_WRT, +EQ_ACC, EQ_ADR=0, EQ_DATA_LO=0x67 */
+ { 0x47, 0x63, 0x0647 }, /* EQ_DATA_HI=0x0647 */
+ { 0x47, 0x64, 0xc1c7 }, /* +EQ_WRT, +EQ_ACC, EQ_ADR=1, EQ_DATA_LO=0x67 */
+ { 0x47, 0x63, 0xf370 }, /* EQ_DATA_HI=0xf370 */
+ { 0x47, 0x64, 0xc271 }, /* +EQ_WRT, +EQ_ACC, EQ_ADR=2, EQ_DATA_LO=0x71 */
+ { 0x47, 0x63, 0x1ef8 }, /* EQ_DATA_HI=0x1ef8 */
+ { 0x47, 0x64, 0xc348 }, /* +EQ_WRT, +EQ_ACC, EQ_ADR=3, EQ_DATA_LO=0x48 */
+ { 0x47, 0x63, 0xc110 }, /* EQ_DATA_HI=0xc110 */
+ { 0x47, 0x64, 0xc45a }, /* +EQ_WRT, +EQ_ACC, EQ_ADR=4, EQ_DATA_LO=0x5a */
+ { 0x47, 0x63, 0x1f29 }, /* EQ_DATA_HI=0x1f29 */
+ { 0x47, 0x64, 0xc574 }, /* +EQ_WRT, +EQ_ACC, EQ_ADR=5, EQ_DATA_LO=0x74 */
+ { 0x47, 0x63, 0x1d7a }, /* EQ_DATA_HI=0x1d7a */
+ { 0x47, 0x64, 0xc653 }, /* +EQ_WRT, +EQ_ACC, EQ_ADR=6, EQ_DATA_LO=0x53 */
+ { 0x47, 0x63, 0xc38c }, /* EQ_DATA_HI=0xc38c */
+ { 0x47, 0x64, 0xc714 }, /* +EQ_WRT, +EQ_ACC, EQ_ADR=7, EQ_DATA_LO=0x14 */
+ { 0x47, 0x63, 0x1ca3 }, /* EQ_DATA_HI=0x1ca3 */
+ { 0x47, 0x64, 0xc8c7 }, /* +EQ_WRT, +EQ_ACC, EQ_ADR=8, EQ_DATA_LO=0xc7 */
+ { 0x47, 0x63, 0xc38c }, /* EQ_DATA_HI=0xc38c */
+ { 0x47, 0x64, 0xc914 }, /* +EQ_WRT, +EQ_ACC, EQ_ADR=9, EQ_DATA_LO=0x14 */
+ { 0x47, 0x64, 0x0000 }, /* -EQ_ACC, -EQ_WRT */
+ {} /* Terminator */
+};
+
/**
* cs8409_enable_i2c_clock - Enable I2C clocks
* @codec: the codec instance
@@ -2029,6 +2057,7 @@ static void cs8409_enable_ur(struct hda_codec *codec, int flag)
static void cs8409_cs42l42_hw_init(struct hda_codec *codec)
{
const struct cs8409_cir_param *seq = cs8409_cs42l42_hw_cfg;
+ const struct cs8409_cir_param *seq_bullseye = cs8409_cs42l42_bullseye_atn;
struct cs_spec *spec = codec->spec;
if (spec->gpio_mask) {
@@ -2043,6 +2072,10 @@ static void cs8409_cs42l42_hw_init(struct hda_codec *codec)
for (; seq->nid; seq++)
cs_vendor_coef_set(codec, seq->cir, seq->coeff);
+ if (codec->fixup_id == CS8409_BULLSEYE)
+ for (; seq_bullseye->nid; seq_bullseye++)
+ cs_vendor_coef_set(codec, seq_bullseye->cir, seq_bullseye->coeff);
+
/* Disable Unsolicited Response during boot */
cs8409_enable_ur(codec, 0);
reply other threads:[~2021-05-12 10:06 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=162081397415219@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=sbinding@opensource.cirrus.com \
--cc=stable@vger.kernel.org \
--cc=tiwai@suse.de \
--cc=vicamo.yang@canonical.com \
--cc=vitalyr@opensource.cirrus.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox