From: <gregkh@linuxfoundation.org>
To: opendmb@gmail.com, davem@davemloft.net, f.fainelli@gmail.com
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] net: bcmgenet: ensure EXT_ENERGY_DET_MASK is clear" failed to apply to 4.14-stable tree
Date: Thu, 22 Jul 2021 17:10:15 +0200 [thread overview]
Message-ID: <162696661520662@kroah.com> (raw)
The patch below does not apply to the 4.14-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 5a3c680aa2c12c90c44af383fe6882a39875ab81 Mon Sep 17 00:00:00 2001
From: Doug Berger <opendmb@gmail.com>
Date: Tue, 29 Jun 2021 17:14:19 -0700
Subject: [PATCH] net: bcmgenet: ensure EXT_ENERGY_DET_MASK is clear
Setting the EXT_ENERGY_DET_MASK bit allows the port energy detection
logic of the internal PHY to prevent the system from sleeping. Some
internal PHYs will report that energy is detected when the network
interface is closed which can prevent the system from going to sleep
if WoL is enabled when the interface is brought down.
Since the driver does not support waking the system on this logic,
this commit clears the bit whenever the internal PHY is powered up
and the other logic for manipulating the bit is removed since it
serves no useful function.
Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index 41f7f078cd27..35e9956e930c 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -1640,7 +1640,8 @@ static void bcmgenet_power_up(struct bcmgenet_priv *priv,
switch (mode) {
case GENET_POWER_PASSIVE:
- reg &= ~(EXT_PWR_DOWN_DLL | EXT_PWR_DOWN_BIAS);
+ reg &= ~(EXT_PWR_DOWN_DLL | EXT_PWR_DOWN_BIAS |
+ EXT_ENERGY_DET_MASK);
if (GENET_IS_V5(priv)) {
reg &= ~(EXT_PWR_DOWN_PHY_EN |
EXT_PWR_DOWN_PHY_RD |
@@ -3292,7 +3293,6 @@ static int bcmgenet_open(struct net_device *dev)
{
struct bcmgenet_priv *priv = netdev_priv(dev);
unsigned long dma_ctrl;
- u32 reg;
int ret;
netif_dbg(priv, ifup, dev, "bcmgenet_open\n");
@@ -3318,12 +3318,6 @@ static int bcmgenet_open(struct net_device *dev)
bcmgenet_set_hw_addr(priv, dev->dev_addr);
- if (priv->internal_phy) {
- reg = bcmgenet_ext_readl(priv, EXT_EXT_PWR_MGMT);
- reg |= EXT_ENERGY_DET_MASK;
- bcmgenet_ext_writel(priv, reg, EXT_EXT_PWR_MGMT);
- }
-
/* Disable RX/TX DMA and flush TX queues */
dma_ctrl = bcmgenet_dma_disable(priv);
@@ -4139,7 +4133,6 @@ static int bcmgenet_resume(struct device *d)
struct bcmgenet_priv *priv = netdev_priv(dev);
struct bcmgenet_rxnfc_rule *rule;
unsigned long dma_ctrl;
- u32 reg;
int ret;
if (!netif_running(dev))
@@ -4176,12 +4169,6 @@ static int bcmgenet_resume(struct device *d)
if (rule->state != BCMGENET_RXNFC_STATE_UNUSED)
bcmgenet_hfb_create_rxnfc_filter(priv, rule);
- if (priv->internal_phy) {
- reg = bcmgenet_ext_readl(priv, EXT_EXT_PWR_MGMT);
- reg |= EXT_ENERGY_DET_MASK;
- bcmgenet_ext_writel(priv, reg, EXT_EXT_PWR_MGMT);
- }
-
/* Disable RX/TX DMA and flush TX queues */
dma_ctrl = bcmgenet_dma_disable(priv);
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c b/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c
index facde824bcaa..e31a5a397f11 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c
@@ -186,12 +186,6 @@ int bcmgenet_wol_power_down_cfg(struct bcmgenet_priv *priv,
reg |= CMD_RX_EN;
bcmgenet_umac_writel(priv, reg, UMAC_CMD);
- if (priv->hw_params->flags & GENET_HAS_EXT) {
- reg = bcmgenet_ext_readl(priv, EXT_EXT_PWR_MGMT);
- reg &= ~EXT_ENERGY_DET_MASK;
- bcmgenet_ext_writel(priv, reg, EXT_EXT_PWR_MGMT);
- }
-
reg = UMAC_IRQ_MPD_R;
if (hfb_enable)
reg |= UMAC_IRQ_HFB_SM | UMAC_IRQ_HFB_MM;
reply other threads:[~2021-07-22 15:11 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=162696661520662@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=opendmb@gmail.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox