FAILED: patch "[PATCH] tty: serial: fsl_lpuart: fix the wrong return value in" failed to apply to 5.10-stable tree

[<gregkh@linuxfoundation.org>]

The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 06e91df16f3e1ca1a1886968fb22d4258f3b6b6f Mon Sep 17 00:00:00 2001
From: Sherry Sun <sherry.sun@nxp.com>
Date: Thu, 29 Jul 2021 16:31:09 +0800
Subject: [PATCH] tty: serial: fsl_lpuart: fix the wrong return value in
 lpuart32_get_mctrl

Patch e60c2991f18b make the lpuart32_get_mctrl always return 0, actually
this will break the functions of device which use flow control such as
Bluetooth.
For lpuart32 plaform, the hardware can handle the CTS automatically.
So we should set TIOCM_CTS active. Also need to set CAR and DSR active.

Patch has been tested on lpuart32 platforms such as imx8qm and imx8ulp.

Fixes: e60c2991f18b ("serial: fsl_lpuart: remove RTSCTS handling from get_mctrl()")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20210729083109.31541-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 508128ddfa01..f0e5da77ed6d 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -1415,7 +1415,7 @@ static unsigned int lpuart_get_mctrl(struct uart_port *port)
 
 static unsigned int lpuart32_get_mctrl(struct uart_port *port)
 {
-	unsigned int mctrl = 0;
+	unsigned int mctrl = TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
 	u32 reg;
 
 	reg = lpuart32_read(port, UARTCTRL);