FAILED: patch "[PATCH] net: stmmac: skip only stmmac_ptp_register when resume from" failed to apply to 4.9-stable tree

[<gregkh@linuxfoundation.org>]

The patch below does not apply to the 4.9-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 0735e639f129dff455aeb91da291f5c578cc33db Mon Sep 17 00:00:00 2001
From: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Date: Wed, 26 Jan 2022 17:47:23 +0800
Subject: [PATCH] net: stmmac: skip only stmmac_ptp_register when resume from
 suspend

When resume from suspend, besides skipping PTP registration, it also
skipping PTP HW initialization. This could cause PTP clock not able to
operate properly when resume from suspend.

To fix this, only stmmac_ptp_register() is skipped when resume from
suspend.

Fixes: fe1319291150 ("stmmac: Don't init ptp again when resume from suspend/hibernation")
Cc: <stable@vger.kernel.org> # 5.15.x
Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 25c802344356..639a753266e6 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -915,8 +915,6 @@ static int stmmac_init_ptp(struct stmmac_priv *priv)
 	priv->hwts_tx_en = 0;
 	priv->hwts_rx_en = 0;
 
-	stmmac_ptp_register(priv);
-
 	return 0;
 }
 
@@ -3242,7 +3240,7 @@ static int stmmac_fpe_start_wq(struct stmmac_priv *priv)
 /**
  * stmmac_hw_setup - setup mac in a usable state.
  *  @dev : pointer to the device structure.
- *  @init_ptp: initialize PTP if set
+ *  @ptp_register: register PTP if set
  *  Description:
  *  this is the main function to setup the HW in a usable state because the
  *  dma engine is reset, the core registers are configured (e.g. AXI,
@@ -3252,7 +3250,7 @@ static int stmmac_fpe_start_wq(struct stmmac_priv *priv)
  *  0 on success and an appropriate (-)ve integer as defined in errno.h
  *  file on failure.
  */
-static int stmmac_hw_setup(struct net_device *dev, bool init_ptp)
+static int stmmac_hw_setup(struct net_device *dev, bool ptp_register)
 {
 	struct stmmac_priv *priv = netdev_priv(dev);
 	u32 rx_cnt = priv->plat->rx_queues_to_use;
@@ -3309,13 +3307,13 @@ static int stmmac_hw_setup(struct net_device *dev, bool init_ptp)
 
 	stmmac_mmc_setup(priv);
 
-	if (init_ptp) {
-		ret = stmmac_init_ptp(priv);
-		if (ret == -EOPNOTSUPP)
-			netdev_warn(priv->dev, "PTP not supported by HW\n");
-		else if (ret)
-			netdev_warn(priv->dev, "PTP init failed\n");
-	}
+	ret = stmmac_init_ptp(priv);
+	if (ret == -EOPNOTSUPP)
+		netdev_warn(priv->dev, "PTP not supported by HW\n");
+	else if (ret)
+		netdev_warn(priv->dev, "PTP init failed\n");
+	else if (ptp_register)
+		stmmac_ptp_register(priv);
 
 	priv->eee_tw_timer = STMMAC_DEFAULT_TWT_LS;