From: <gregkh@linuxfoundation.org>
To: sean@geanix.com, boris.brezillon@collabora.com,
miquel.raynal@bootlin.com
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] mtd: rawnand: protect access to rawnand devices while in" failed to apply to 5.4-stable tree
Date: Fri, 01 Apr 2022 12:33:16 +0200 [thread overview]
Message-ID: <164880919617154@kroah.com> (raw)
The patch below does not apply to the 5.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 8cba323437a49a45756d661f500b324fc2d486fe Mon Sep 17 00:00:00 2001
From: Sean Nyekjaer <sean@geanix.com>
Date: Tue, 8 Feb 2022 09:52:13 +0100
Subject: [PATCH] mtd: rawnand: protect access to rawnand devices while in
suspend
Prevent rawnand access while in a suspended state.
Commit 013e6292aaf5 ("mtd: rawnand: Simplify the locking") allows the
rawnand layer to return errors rather than waiting in a blocking wait.
Tested on a iMX6ULL.
Fixes: 013e6292aaf5 ("mtd: rawnand: Simplify the locking")
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220208085213.1838273-1-sean@geanix.com
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index 3e4a525ac3ca..612ae60e9763 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -338,16 +338,19 @@ static int nand_isbad_bbm(struct nand_chip *chip, loff_t ofs)
*
* Return: -EBUSY if the chip has been suspended, 0 otherwise
*/
-static int nand_get_device(struct nand_chip *chip)
+static void nand_get_device(struct nand_chip *chip)
{
- mutex_lock(&chip->lock);
- if (chip->suspended) {
+ /* Wait until the device is resumed. */
+ while (1) {
+ mutex_lock(&chip->lock);
+ if (!chip->suspended) {
+ mutex_lock(&chip->controller->lock);
+ return;
+ }
mutex_unlock(&chip->lock);
- return -EBUSY;
- }
- mutex_lock(&chip->controller->lock);
- return 0;
+ wait_event(chip->resume_wq, !chip->suspended);
+ }
}
/**
@@ -576,9 +579,7 @@ static int nand_block_markbad_lowlevel(struct nand_chip *chip, loff_t ofs)
nand_erase_nand(chip, &einfo, 0);
/* Write bad block marker to OOB */
- ret = nand_get_device(chip);
- if (ret)
- return ret;
+ nand_get_device(chip);
ret = nand_markbad_bbm(chip, ofs);
nand_release_device(chip);
@@ -3826,9 +3827,7 @@ static int nand_read_oob(struct mtd_info *mtd, loff_t from,
ops->mode != MTD_OPS_RAW)
return -ENOTSUPP;
- ret = nand_get_device(chip);
- if (ret)
- return ret;
+ nand_get_device(chip);
if (!ops->datbuf)
ret = nand_do_read_oob(chip, from, ops);
@@ -4415,13 +4414,11 @@ static int nand_write_oob(struct mtd_info *mtd, loff_t to,
struct mtd_oob_ops *ops)
{
struct nand_chip *chip = mtd_to_nand(mtd);
- int ret;
+ int ret = 0;
ops->retlen = 0;
- ret = nand_get_device(chip);
- if (ret)
- return ret;
+ nand_get_device(chip);
switch (ops->mode) {
case MTD_OPS_PLACE_OOB:
@@ -4481,9 +4478,7 @@ int nand_erase_nand(struct nand_chip *chip, struct erase_info *instr,
return -EIO;
/* Grab the lock and see if the device is available */
- ret = nand_get_device(chip);
- if (ret)
- return ret;
+ nand_get_device(chip);
/* Shift to get first page */
page = (int)(instr->addr >> chip->page_shift);
@@ -4570,7 +4565,7 @@ static void nand_sync(struct mtd_info *mtd)
pr_debug("%s: called\n", __func__);
/* Grab the lock and see if the device is available */
- WARN_ON(nand_get_device(chip));
+ nand_get_device(chip);
/* Release it and go back */
nand_release_device(chip);
}
@@ -4587,9 +4582,7 @@ static int nand_block_isbad(struct mtd_info *mtd, loff_t offs)
int ret;
/* Select the NAND device */
- ret = nand_get_device(chip);
- if (ret)
- return ret;
+ nand_get_device(chip);
nand_select_target(chip, chipnr);
@@ -4660,6 +4653,8 @@ static void nand_resume(struct mtd_info *mtd)
__func__);
}
mutex_unlock(&chip->lock);
+
+ wake_up_all(&chip->resume_wq);
}
/**
@@ -5438,6 +5433,7 @@ static int nand_scan_ident(struct nand_chip *chip, unsigned int maxchips,
chip->cur_cs = -1;
mutex_init(&chip->lock);
+ init_waitqueue_head(&chip->resume_wq);
/* Enforce the right timings for reset/detection */
chip->current_interface_config = nand_get_reset_interface_config();
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index 5b88cd51fadb..dcf90144d70b 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -1240,6 +1240,7 @@ struct nand_secure_region {
* @lock: Lock protecting the suspended field. Also used to serialize accesses
* to the NAND device
* @suspended: Set to 1 when the device is suspended, 0 when it's not
+ * @resume_wq: wait queue to sleep if rawnand is in suspended state.
* @cur_cs: Currently selected target. -1 means no target selected, otherwise we
* should always have cur_cs >= 0 && cur_cs < nanddev_ntargets().
* NAND Controller drivers should not modify this value, but they're
@@ -1294,6 +1295,7 @@ struct nand_chip {
/* Internals */
struct mutex lock;
unsigned int suspended : 1;
+ wait_queue_head_t resume_wq;
int cur_cs;
int read_retries;
struct nand_secure_region *secure_regions;
reply other threads:[~2022-04-01 10:33 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=164880919617154@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=boris.brezillon@collabora.com \
--cc=miquel.raynal@bootlin.com \
--cc=sean@geanix.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).