FAILED: patch "[PATCH] usb: dwc3: gadget: Avoid duplicate requests to enable" failed to apply to 5.15-stable tree

FAILED: patch "[PATCH] usb: dwc3: gadget: Avoid duplicate requests to enable" failed to apply to 5.15-stable tree

[gregkh]

The patch below does not apply to the 5.15-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 040f2dbd2010c43f33ad27249e6dac48456f4d99 Mon Sep 17 00:00:00 2001
From: Wesley Cheng <quic_wcheng@quicinc.com>
Date: Wed, 27 Jul 2022 19:06:47 -0700
Subject: [PATCH] usb: dwc3: gadget: Avoid duplicate requests to enable
 Run/Stop

Relocate the pullups_connected check until after it is ensured that there
are no runtime PM transitions.  If another context triggered the DWC3
core's runtime resume, it may have already enabled the Run/Stop.  Do not
re-run the entire pullup sequence again, as it may issue a core soft
reset while Run/Stop is already set.

This patch depends on
  commit 69e131d1ac4e ("usb: dwc3: gadget: Prevent repeat pullup()")

Fixes: 77adb8bdf422 ("usb: dwc3: gadget: Allow runtime suspend if UDC unbinded")
Cc: stable <stable@kernel.org>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Link: https://lore.kernel.org/r/20220728020647.9377-1-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index aeeec751c53c..eca945feeec3 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2539,9 +2539,6 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
 
 	is_on = !!is_on;
 
-	if (dwc->pullups_connected == is_on)
-		return 0;
-
 	dwc->softconnect = is_on;
 
 	/*
@@ -2566,6 +2563,11 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
 		return 0;
 	}
 
+	if (dwc->pullups_connected == is_on) {
+		pm_runtime_put(dwc->dev);
+		return 0;
+	}
+
 	if (!is_on) {
 		ret = dwc3_gadget_soft_disconnect(dwc);
 	} else {