From: <gregkh@linuxfoundation.org>
To: rodrigo.vivi@intel.com, ashutosh.dixit@intel.com,
stable@vger.kernel.org, sushma.venkatesh.reddy@intel.com
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] drm/i915/slpc: Let's fix the PCODE min freq table setup for" failed to apply to 5.15-stable tree
Date: Sat, 10 Sep 2022 08:29:54 +0200 [thread overview]
Message-ID: <166279139419416@kroah.com> (raw)
The patch below does not apply to the 5.15-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
Possible dependencies:
e1cab970574c ("drm/i915/slpc: Let's fix the PCODE min freq table setup for SLPC")
4dd4375bc4ff ("drm/i915: split out intel_pcode.[ch] to separate file")
1eecf31e3c96 ("drm/i915: split out vlv sideband to a separate file")
5f5ada0bae45 ("drm/i915: De-wrapper bxt_ddi_phy_set_signal_levels()")
193299ad9d85 ("drm/i915: Nuke useless .set_signal_levels() wrappers")
e722ab8b6968 ("drm/i915: Generalize .set_signal_levels()")
5bafd85dd770 ("drm/i915: Introduce has_buf_trans_select()")
f820693bc238 ("drm/i915: Introduce has_iboost()")
80e77e30a212 ("drm/i915/dpll: move dpll modeset asserts to intel_dpll.c")
aa0813b1ba31 ("drm/i915/pps: move pps (panel) modeset asserts to intel_pps.c")
e04a911f4366 ("drm/i915/fdi: move fdi modeset asserts to intel_fdi.c")
e505d76404b1 ("drm/i915: s/ddi_translations/trans/")
4360a2b54fd7 ("drm/i915/display: add intel_fdi_link_train wrapper.")
8c66081b0b32 ("drm/i915: s/pipe/transcoder/ when dealing with PIPECONF/TRANSCONF")
a338847abc8e ("drm/i915: Call {vlv,chv}_prepare_pll() from {vlv,chv}_enable_pll()")
510e890e8222 ("drm/i915: Remove the 'reg' local variable")
8a3b3df39757 ("drm/i915: Clean up variable names in old dpll functions")
6205372b4b6d ("drm/i915: Clean dpll calling convention")
24951b5813c1 ("drm/i915: Constify struct dpll all over")
b294425e9091 ("drm/i915: Extract ilk_update_pll_dividers()")
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From e1cab970574c001d83e59ca8388c474a57a1afb6 Mon Sep 17 00:00:00 2001
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Date: Wed, 31 Aug 2022 17:45:38 -0400
Subject: [PATCH] drm/i915/slpc: Let's fix the PCODE min freq table setup for
SLPC
We need to inform PCODE of a desired ring frequencies so PCODE update
the memory frequencies to us. rps->min_freq and rps->max_freq are the
frequencies used in that request. However they were unset when SLPC was
enabled and PCODE never updated the memory freq.
v2 (as Suggested by Ashutosh): if SLPC is in use, let's pick the right
frequencies from the get_ia_constants instead of the fake init of
rps' min and max.
v3: don't forget the max <= min return
v4: Move all the freq conversion to intel_rps.c. And the max <= min
check to where it belongs.
v5: (Ashutosh) Fix old comment s/50 HZ/50 MHz and add a doc explaining
the "raw format"
Fixes: 7ba79a671568 ("drm/i915/guc/slpc: Gate Host RPS when SLPC is enabled")
Cc: <stable@vger.kernel.org> # v5.15+
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Tested-by: Sushma Venkatesh Reddy <sushma.venkatesh.reddy@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220831214538.143950-1-rodrigo.vivi@intel.com
(cherry picked from commit 018a7bdbb090b9155a6509a0d1a684db4afaa5b1)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
diff --git a/drivers/gpu/drm/i915/gt/intel_llc.c b/drivers/gpu/drm/i915/gt/intel_llc.c
index 14fe65812e42..1d19c073ba2e 100644
--- a/drivers/gpu/drm/i915/gt/intel_llc.c
+++ b/drivers/gpu/drm/i915/gt/intel_llc.c
@@ -12,6 +12,7 @@
#include "intel_llc.h"
#include "intel_mchbar_regs.h"
#include "intel_pcode.h"
+#include "intel_rps.h"
struct ia_constants {
unsigned int min_gpu_freq;
@@ -55,9 +56,6 @@ static bool get_ia_constants(struct intel_llc *llc,
if (!HAS_LLC(i915) || IS_DGFX(i915))
return false;
- if (rps->max_freq <= rps->min_freq)
- return false;
-
consts->max_ia_freq = cpu_max_MHz();
consts->min_ring_freq =
@@ -65,13 +63,8 @@ static bool get_ia_constants(struct intel_llc *llc,
/* convert DDR frequency from units of 266.6MHz to bandwidth */
consts->min_ring_freq = mult_frac(consts->min_ring_freq, 8, 3);
- consts->min_gpu_freq = rps->min_freq;
- consts->max_gpu_freq = rps->max_freq;
- if (GRAPHICS_VER(i915) >= 9) {
- /* Convert GT frequency to 50 HZ units */
- consts->min_gpu_freq /= GEN9_FREQ_SCALER;
- consts->max_gpu_freq /= GEN9_FREQ_SCALER;
- }
+ consts->min_gpu_freq = intel_rps_get_min_raw_freq(rps);
+ consts->max_gpu_freq = intel_rps_get_max_raw_freq(rps);
return true;
}
@@ -130,6 +123,12 @@ static void gen6_update_ring_freq(struct intel_llc *llc)
if (!get_ia_constants(llc, &consts))
return;
+ /*
+ * Although this is unlikely on any platform during initialization,
+ * let's ensure we don't get accidentally into infinite loop
+ */
+ if (consts.max_gpu_freq <= consts.min_gpu_freq)
+ return;
/*
* For each potential GPU frequency, load a ring frequency we'd like
* to use for memory access. We do this by specifying the IA frequency
diff --git a/drivers/gpu/drm/i915/gt/intel_rps.c b/drivers/gpu/drm/i915/gt/intel_rps.c
index fb3f57ee450b..7bb967034679 100644
--- a/drivers/gpu/drm/i915/gt/intel_rps.c
+++ b/drivers/gpu/drm/i915/gt/intel_rps.c
@@ -2126,6 +2126,31 @@ u32 intel_rps_get_max_frequency(struct intel_rps *rps)
return intel_gpu_freq(rps, rps->max_freq_softlimit);
}
+/**
+ * intel_rps_get_max_raw_freq - returns the max frequency in some raw format.
+ * @rps: the intel_rps structure
+ *
+ * Returns the max frequency in a raw format. In newer platforms raw is in
+ * units of 50 MHz.
+ */
+u32 intel_rps_get_max_raw_freq(struct intel_rps *rps)
+{
+ struct intel_guc_slpc *slpc = rps_to_slpc(rps);
+ u32 freq;
+
+ if (rps_uses_slpc(rps)) {
+ return DIV_ROUND_CLOSEST(slpc->rp0_freq,
+ GT_FREQUENCY_MULTIPLIER);
+ } else {
+ freq = rps->max_freq;
+ if (GRAPHICS_VER(rps_to_i915(rps)) >= 9) {
+ /* Convert GT frequency to 50 MHz units */
+ freq /= GEN9_FREQ_SCALER;
+ }
+ return freq;
+ }
+}
+
u32 intel_rps_get_rp0_frequency(struct intel_rps *rps)
{
struct intel_guc_slpc *slpc = rps_to_slpc(rps);
@@ -2214,6 +2239,31 @@ u32 intel_rps_get_min_frequency(struct intel_rps *rps)
return intel_gpu_freq(rps, rps->min_freq_softlimit);
}
+/**
+ * intel_rps_get_min_raw_freq - returns the min frequency in some raw format.
+ * @rps: the intel_rps structure
+ *
+ * Returns the min frequency in a raw format. In newer platforms raw is in
+ * units of 50 MHz.
+ */
+u32 intel_rps_get_min_raw_freq(struct intel_rps *rps)
+{
+ struct intel_guc_slpc *slpc = rps_to_slpc(rps);
+ u32 freq;
+
+ if (rps_uses_slpc(rps)) {
+ return DIV_ROUND_CLOSEST(slpc->min_freq,
+ GT_FREQUENCY_MULTIPLIER);
+ } else {
+ freq = rps->min_freq;
+ if (GRAPHICS_VER(rps_to_i915(rps)) >= 9) {
+ /* Convert GT frequency to 50 MHz units */
+ freq /= GEN9_FREQ_SCALER;
+ }
+ return freq;
+ }
+}
+
static int set_min_freq(struct intel_rps *rps, u32 val)
{
int ret = 0;
diff --git a/drivers/gpu/drm/i915/gt/intel_rps.h b/drivers/gpu/drm/i915/gt/intel_rps.h
index 1e8d56491308..4509dfdc52e0 100644
--- a/drivers/gpu/drm/i915/gt/intel_rps.h
+++ b/drivers/gpu/drm/i915/gt/intel_rps.h
@@ -37,8 +37,10 @@ u32 intel_rps_get_cagf(struct intel_rps *rps, u32 rpstat1);
u32 intel_rps_read_actual_frequency(struct intel_rps *rps);
u32 intel_rps_get_requested_frequency(struct intel_rps *rps);
u32 intel_rps_get_min_frequency(struct intel_rps *rps);
+u32 intel_rps_get_min_raw_freq(struct intel_rps *rps);
int intel_rps_set_min_frequency(struct intel_rps *rps, u32 val);
u32 intel_rps_get_max_frequency(struct intel_rps *rps);
+u32 intel_rps_get_max_raw_freq(struct intel_rps *rps);
int intel_rps_set_max_frequency(struct intel_rps *rps, u32 val);
u32 intel_rps_get_rp0_frequency(struct intel_rps *rps);
u32 intel_rps_get_rp1_frequency(struct intel_rps *rps);
reply other threads:[~2022-09-10 6:29 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=166279139419416@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=ashutosh.dixit@intel.com \
--cc=rodrigo.vivi@intel.com \
--cc=stable@vger.kernel.org \
--cc=sushma.venkatesh.reddy@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox