From: <gregkh@linuxfoundation.org>
To: baolin.wang@linux.alibaba.com, akpm@linux-foundation.org,
david@redhat.com, mike.kravetz@oracle.com,
songmuchun@bytedance.com, stable@vger.kernel.org
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] mm/hugetlb: fix races when looking up a CONT-PTE/PMD size" failed to apply to 5.15-stable tree
Date: Sun, 16 Oct 2022 13:04:44 +0200 [thread overview]
Message-ID: <1665918284111132@kroah.com> (raw)
The patch below does not apply to the 5.15-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
Possible dependencies:
fac35ba763ed ("mm/hugetlb: fix races when looking up a CONT-PTE/PMD size hugetlb page")
ad1ac596e8a8 ("mm/migration: fix potential pte_unmap on an not mapped pte")
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From fac35ba763ed07ba93154c95ffc0c4a55023707f Mon Sep 17 00:00:00 2001
From: Baolin Wang <baolin.wang@linux.alibaba.com>
Date: Thu, 1 Sep 2022 18:41:31 +0800
Subject: [PATCH] mm/hugetlb: fix races when looking up a CONT-PTE/PMD size
hugetlb page
On some architectures (like ARM64), it can support CONT-PTE/PMD size
hugetlb, which means it can support not only PMD/PUD size hugetlb (2M and
1G), but also CONT-PTE/PMD size(64K and 32M) if a 4K page size specified.
So when looking up a CONT-PTE size hugetlb page by follow_page(), it will
use pte_offset_map_lock() to get the pte entry lock for the CONT-PTE size
hugetlb in follow_page_pte(). However this pte entry lock is incorrect
for the CONT-PTE size hugetlb, since we should use huge_pte_lock() to get
the correct lock, which is mm->page_table_lock.
That means the pte entry of the CONT-PTE size hugetlb under current pte
lock is unstable in follow_page_pte(), we can continue to migrate or
poison the pte entry of the CONT-PTE size hugetlb, which can cause some
potential race issues, even though they are under the 'pte lock'.
For example, suppose thread A is trying to look up a CONT-PTE size hugetlb
page by move_pages() syscall under the lock, however antoher thread B can
migrate the CONT-PTE hugetlb page at the same time, which will cause
thread A to get an incorrect page, if thread A also wants to do page
migration, then data inconsistency error occurs.
Moreover we have the same issue for CONT-PMD size hugetlb in
follow_huge_pmd().
To fix above issues, rename the follow_huge_pmd() as follow_huge_pmd_pte()
to handle PMD and PTE level size hugetlb, which uses huge_pte_lock() to
get the correct pte entry lock to make the pte entry stable.
Mike said:
Support for CONT_PMD/_PTE was added with bb9dd3df8ee9 ("arm64: hugetlb:
refactor find_num_contig()"). Patch series "Support for contiguous pte
hugepages", v4. However, I do not believe these code paths were
executed until migration support was added with 5480280d3f2d ("arm64/mm:
enable HugeTLB migration for contiguous bit HugeTLB pages") I would go
with 5480280d3f2d for the Fixes: targe.
Link: https://lkml.kernel.org/r/635f43bdd85ac2615a58405da82b4d33c6e5eb05.1662017562.git.baolin.wang@linux.alibaba.com
Fixes: 5480280d3f2d ("arm64/mm: enable HugeTLB migration for contiguous bit HugeTLB pages")
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Suggested-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h
index 3ec981a0d8b3..67c88b82fc32 100644
--- a/include/linux/hugetlb.h
+++ b/include/linux/hugetlb.h
@@ -207,8 +207,8 @@ struct page *follow_huge_addr(struct mm_struct *mm, unsigned long address,
struct page *follow_huge_pd(struct vm_area_struct *vma,
unsigned long address, hugepd_t hpd,
int flags, int pdshift);
-struct page *follow_huge_pmd(struct mm_struct *mm, unsigned long address,
- pmd_t *pmd, int flags);
+struct page *follow_huge_pmd_pte(struct vm_area_struct *vma, unsigned long address,
+ int flags);
struct page *follow_huge_pud(struct mm_struct *mm, unsigned long address,
pud_t *pud, int flags);
struct page *follow_huge_pgd(struct mm_struct *mm, unsigned long address,
@@ -312,8 +312,8 @@ static inline struct page *follow_huge_pd(struct vm_area_struct *vma,
return NULL;
}
-static inline struct page *follow_huge_pmd(struct mm_struct *mm,
- unsigned long address, pmd_t *pmd, int flags)
+static inline struct page *follow_huge_pmd_pte(struct vm_area_struct *vma,
+ unsigned long address, int flags)
{
return NULL;
}
diff --git a/mm/gup.c b/mm/gup.c
index 00926abb4426..251cb6a10bc0 100644
--- a/mm/gup.c
+++ b/mm/gup.c
@@ -530,6 +530,18 @@ static struct page *follow_page_pte(struct vm_area_struct *vma,
if (WARN_ON_ONCE((flags & (FOLL_PIN | FOLL_GET)) ==
(FOLL_PIN | FOLL_GET)))
return ERR_PTR(-EINVAL);
+
+ /*
+ * Considering PTE level hugetlb, like continuous-PTE hugetlb on
+ * ARM64 architecture.
+ */
+ if (is_vm_hugetlb_page(vma)) {
+ page = follow_huge_pmd_pte(vma, address, flags);
+ if (page)
+ return page;
+ return no_page_table(vma, flags);
+ }
+
retry:
if (unlikely(pmd_bad(*pmd)))
return no_page_table(vma, flags);
@@ -662,7 +674,7 @@ static struct page *follow_pmd_mask(struct vm_area_struct *vma,
if (pmd_none(pmdval))
return no_page_table(vma, flags);
if (pmd_huge(pmdval) && is_vm_hugetlb_page(vma)) {
- page = follow_huge_pmd(mm, address, pmd, flags);
+ page = follow_huge_pmd_pte(vma, address, flags);
if (page)
return page;
return no_page_table(vma, flags);
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 0bdfc7e1c933..9564bf817e6a 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -6946,12 +6946,13 @@ follow_huge_pd(struct vm_area_struct *vma,
}
struct page * __weak
-follow_huge_pmd(struct mm_struct *mm, unsigned long address,
- pmd_t *pmd, int flags)
+follow_huge_pmd_pte(struct vm_area_struct *vma, unsigned long address, int flags)
{
+ struct hstate *h = hstate_vma(vma);
+ struct mm_struct *mm = vma->vm_mm;
struct page *page = NULL;
spinlock_t *ptl;
- pte_t pte;
+ pte_t *ptep, pte;
/*
* FOLL_PIN is not supported for follow_page(). Ordinary GUP goes via
@@ -6961,17 +6962,15 @@ follow_huge_pmd(struct mm_struct *mm, unsigned long address,
return NULL;
retry:
- ptl = pmd_lockptr(mm, pmd);
- spin_lock(ptl);
- /*
- * make sure that the address range covered by this pmd is not
- * unmapped from other threads.
- */
- if (!pmd_huge(*pmd))
- goto out;
- pte = huge_ptep_get((pte_t *)pmd);
+ ptep = huge_pte_offset(mm, address, huge_page_size(h));
+ if (!ptep)
+ return NULL;
+
+ ptl = huge_pte_lock(h, mm, ptep);
+ pte = huge_ptep_get(ptep);
if (pte_present(pte)) {
- page = pmd_page(*pmd) + ((address & ~PMD_MASK) >> PAGE_SHIFT);
+ page = pte_page(pte) +
+ ((address & ~huge_page_mask(h)) >> PAGE_SHIFT);
/*
* try_grab_page() should always succeed here, because: a) we
* hold the pmd (ptl) lock, and b) we've just checked that the
@@ -6987,7 +6986,7 @@ follow_huge_pmd(struct mm_struct *mm, unsigned long address,
} else {
if (is_hugetlb_entry_migration(pte)) {
spin_unlock(ptl);
- __migration_entry_wait_huge((pte_t *)pmd, ptl);
+ __migration_entry_wait_huge(ptep, ptl);
goto retry;
}
/*
reply other threads:[~2022-10-16 11:04 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1665918284111132@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=baolin.wang@linux.alibaba.com \
--cc=david@redhat.com \
--cc=mike.kravetz@oracle.com \
--cc=songmuchun@bytedance.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox